Electron‐beam‐induced crosslinking of natural rubber/acrylonitrile–butadiene rubber latex blends in the presence of ethoxylated pentaerythritol tetraacrylate used as a crosslinking promoter

A natural rubber latex, an acrylonitrile–butadiene rubber latex, and their 50: 50 blends were exposed to an electron beam in air. A polyfunctional monomer, ethoxylated pentaerythritol tetraacrylate, was used as a crosslinking promoter. Cast films from the irradiated systems were characterized for their gel contents, swelling properties, and tensile strength. An increase in the radiation dose from 0 to 500 kGy resulted in increased crosslinking, as measured by an increase in the gel content and better swelling resistance. The effect of the polyfunctional monomer, ethoxylated pentaerythritol tetraacrylate, as a crosslinking promoter was studied with infrared spectros copy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1206–1214, 2007     

Iron Nitrate/TEMPO: a Superior Homogeneous Catalyst for Oxidation of Primary Alcohols to Nitriles in Air

A highly practical, one‐step, facile synthesis of aromatic, heteroaromatic, allylic and aliphatic nitriles from primary alcohols catalyzed by ferric nitrate [Fe(NO₃)₃⋅9H₂O] in the presence of TEMPO, aqueous ammonia and air at room temperature is described.

     

A green chemistry approach for the synthesis and characterization of bioactive gold nanoparticles using Azolla microphylla methanol extract

This article reports the environmentally benign synthesis of gold nanoparticles （GNPs） using methanol extract of Azolla microphylla as the stabilizing and reducing agent. The GNPs were characterized by UV-vis spectrophotometry and FTIR, and the morphological characteristics were analyzed by XRD, FESEM-EDX and HRTEM. The GNPs could be formed in very short time, even in less than 30 min. The nanoparticles measured by UV-spectrophotometer demonstrated a peak at 540 nm corresponding to surface plasmon resonance spectra, and the peaks showed by FTIR suggested the presence of organic biomolecules on the surface of the GNPs. XRD results confirmed the crystalline nature of the GNPs, and FESEM-EDX and HRTEM analyses had been performed in the size ranges of 17-40nm and 1.25-17.5nm respectively. The synthesized GNPs showed excellent antioxidant activity. This study shows the feasibility of using plant sources for the biosynthesis of GNPs.     

Effective mechanical properties of hexagonal boron nitride nanosheets

We propose an analytical formulation to extract from energy equivalence principles the equivalent thickness and in-plane mechanical properties (tensile and shear rigidity, and Poisson's ratio) of hexagonal boron nitride (h-BN) nanosheets. The model developed provides not only very good agreement with existing data available in the open literature from experimental, density functional theory (DFT) and molecular dynamics (MD) simulations, but also highlights the specific deformation mechanisms existing in boron nitride sheets, and their difference with carbon-based graphitic systems.     

Precision and accuracy in the quantitative analysis of biological samples by accelerator mass spectrometry: application in microdose absolute bioavailability studies

Determination of the pharmacokinetics and absolute bioavailability of an experimental compound, SCH 900518, following a 89.7 nCi (100 μg) intravenous (iv) dose of (14)C-SCH 900518 2 h post 200 mg oral administration of nonradiolabeled SCH 900518 to six healthy male subjects has been described. The plasma concentration of SCH 900518 was measured using a validated LC-MS/MS system, and accelerator mass spectrometry (AMS) was used for quantitative plasma (14)C-SCH 900518 concentration determination. Calibration standards and quality controls were included for every batch of sample analysis by AMS to ensure acceptable quality of the assay. Plasma (14)C-SCH 900518 concentrations were derived from the regression function established from the calibration standards, rather than directly from isotopic ratios from AMS measurement. The precision and accuracy of quality controls and calibration standards met the requirements of bioanalytical guidance (U.S. Department of Health and Human Services, Food and Drug Administration, Center for Drug Evaluation and Research, Center for Veterinary Medicine. Guidance for Industry: Bioanalytical Method Validation (ucm070107), May 2001. http://www.fda.gov/downloads/Drugs/GuidanceCompilanceRegulatoryInformation/Guidances/ucm070107.pdf ). The AMS measurement had a linear response range from 0.0159 to 9.07 dpm/mL for plasma (14)C-SCH 900158 concentrations. The CV and accuracy were 3.4-8.5% and 94-108% (82-119% for the lower limit of quantitation (LLOQ)), respectively, with a correlation coefficient of 0.9998. The absolute bioavailability was calculated from the dose-normalized area under the curve of iv and oral doses after the plasma concentrations were plotted vs the sampling time post oral dose. The mean absolute bioavailability of SCH 900518 was 40.8% (range 16.8-60.6%). The typical accuracy and standard deviation in AMS quantitative analysis of drugs from human plasma samples have been reported for the first time, and the impact of these parameters on quantitative analysis was further assessed using the Z factor. The use of the lowest achievable LLOQ(Z=0) derived from statistical analysis of the control and low-concentration standards for AMS measurements is proposed in future studies.     

Analytical strategies for assessment of human metabolites in preclinical safety testing

Strategies for the detection, identification, and quantification of in vivo drug metabolites from non-radiolabeled studies are reviewed with an emphasis on the utilization of accurate-mass-based data mining tools. New approaches to the determination of coverage of human drug metabolites in preclinical species without using radiolabeled drugs or synthetic standards are also discussed.     

Exergy analysis of helium liquefaction systems based on modified Claude cycle with two-expanders

Large-scale helium liquefaction systems, being energy-intensive, demand judicious selection of process parameters. An effective tool for design and analysis of thermodynamic cycles for these systems is exergy analysis, which is used to study the behavior of a helium liquefaction system based on modified Claude cycle. Parametric evaluation using process simulator Aspen HYSYS® helps to identify the effects of cycle pressure ratio and expander flow fraction on the exergetic efficiency of the liquefaction cycle. The study computes the distribution of losses at different refrigeration stages of the cycle and helps in selecting optimum cycle pressures, operating temperature levels of expanders and mass flow rates through them. Results from the analysis may help evolving guidelines for designing appropriate thermodynamic cycles for practical helium liquefaction systems.     

Vibrational characteristics of bilayer graphene sheets

Bilayer graphene sheets (BLGSs) are currently receiving increasing attention. In this paper, the vibration characteristics of BLGSs are investigated using analytical and atomistic finite element approaches. Various possible scenarios, namely different geometrical configuration (armchair and zigzag), boundary conditions, and aspect ratio are considered in the present study. The dynamic characteristics of BLGS studied have shown dependence on aspect ratio and the boundary conditions. The unique vibrational properties and large stiffness of BLGS identified in the present work make them suitable candidates for manufacturing nanosensors; electromechanical resonators also will aid the nanomaterials research community to design nanodevices.