The philosophy behind EN15251: Indoor environmental criteria for design and calculation of energy performance of buildings

European Directive for Energy Performance of Buildings (EPBD) was approved in the beginning of 2003. The transition period is 3–6 years depending on the article. European Standardisation Organisation (CEN) has drafted several standards to help the member countries implementing the directive. One of these is the “indoor environmental input parameters for design and assessment of energy performance of buildings-addressing indoor air quality, thermal environment, lighting and acoustics”. The standard specifies design values of indoor environment, values to be used in energy calculations, and methods how to verify the specified indoor environment in the buildings. The standard includes methods for long-term evaluation of the indoor environment. The paper describes the philosophy and some of the principles used in the standard, and gives examples presented in the standard. A draft standard has been under the international review process and has now been finnally approved at the formal vote.     

Virtual dissection of pig carcasses

This paper proposes the use of computed tomography (CT) as a reference method for estimating the lean meat percentage (LMP) of pig carcasses. The current reference is manual dissection which has a limited accuracy due to variability between butchers. A contextual Bayesian classification scheme is applied to classify volume elements of full body CT-scans of pig carcasses into three tissue types. A linear model describes the relation between voxels and the full weight of the half carcass, which can be determined more accurately than that of the lean meat content. Two hundred and ninety-nine half pig carcasses were weighed and CT-scanned. The explained variance of the model was R²=0.9994 with a root-mean-squared error of prediction of 83.6 g. Applying this method as a reference will ensure a more robust calibration of sensors for measuring the LMP, which is less prone to variation induced by manual intervention.     

Numerically optimized performance of diabatic distillation columns

Recently, the concept of equal thermodynamic distance (ETD) has been proposed to minimize entropy production in a distillation process using a diabatic column. ETD gives the optimal temperature profile to first-order in N⁻¹, where N is the number of trays. ETD, however, does not generally give the true minimum for distillation columns with few trays. We therefore apply a fully numerical, multidimensional optimization routine to determine minimum entropy production. Since this method does not depend on an underlying theory, we expect a true minimum to be revealed. We then compare the performance of ETD and numerical optimization by varying the number of trays and the purity requirements. Our results show a surprisingly good agreement between the ETD results and those obtained numerically.     

Dedication

Dedication

Dedication     

Extremely decreased release of prostaglandin E2-like activity from chopped lung of ethyl linolenate-supplemented rats

Three groups of weanling male rats were reared on a fat-free diet for 13 weeks. One group received only the fat-free diet (FF rats), the other 2 groups received the fat-free diet and a daily supplement of 2 energy% ethyl linoleate ([n-6] rats), or 2 energy% ethyl linolenate ([n-3] rats). The chopped lung preparation was used to illustrate an in vitro prostaglandin formation. PGE2-like activity was quantified on rat stomach strip. The release of PGE2-like activity expressed as ng PGE2-equivalent per g lung tissue (mean +/- SD) was 23 +/- 7, less than 6, and 65 +/- 20 for the FF rats, the (n-3) rats, and the (n-6) rats, respectively. PGE2 quantification by radioimmunoassay of the chopped lung effluent collected after passing over the rat stomach strip revealed the same release pattern as the bioassay. Fractionation of chopped lung effluent on HPLC with radioimmunoassay detection indicated that the lung tissue from (n-3) rats released very little PGE3, if any, in spite of a 20:5(n-3)/20:4(n-6) ratio of 5.2 in the lipids of the lung. It is suggested that the pool of arachidonic acid for prostaglandin production in vitro is different from the one which functions in vivo, and the these pools are differently affected by dietary EFA.     

Adding classes to the C language: An exercise in language evolution

The C language is a fine tool for writing compact and efficient programs. It is relatively easy to produce good compilers for, and the number of tools available for supporting program- ming in C is large, especially in its ‘home environment’, the UNM system. However, C'S facilities for structuring programs were, until recently, rather limited. To remedy this situation, a data abstraction facility, called classes, was added. The class concept described here has benefitted from the experience gained through a year's use. It is now in use at close to a hundred installations. The guiding principles of the design of C classes were simplicity both in concept and in implementation. Smooth blending of the new facilities into the existing C programming environment was considered essential. Classes can be used without sacrificing the run-time efficiency expected from C. This paper presents some of the reasons why C classes are what they are.     

Fate of elemental mercury in the Arctic during atmospheric mercury depletion episodes and the load of atmospheric mercury to the Arctic

Atmospheric mercury depletion episodes (AMDEs) were studied at Station Nord, Northeast Greenland, 81 degrees 36' N, 16 degrees 40' W, during the Arctic Spring. Gaseous elemental mercury (GEM) and ozone were measured starting from 1998 and 1999, respectively, until August 2002. GEM was measured with a TEKRAN 2735A automatic mercury analyzer based on preconcentration of mercury on a gold trap followed by detection using fluorescence spectroscopy. Ozone was measured by UV absorption. A scatter plot of GEM and ozone concentrations confirmed that also at Station Nord GEM and ozone are linearly correlated during AMDEs. The relationship between ozone and GEM is further investigated in this paper using basic reaction kinetics (i.e., Cl, ClO, Br, and BrO have been suggested as reactants for GEM). The analyses in this paper show that GEM in the Arctic troposphere most probably reacts with Br. On the basis of the experimental results of this paper and results from the literature, a simple parametrization for AMDE was included into the Danish Eulerian Hemispheric Model (DEHM). In the model, GEM is converted linearly to reactive gaseous mercury (RGM) over sea ice with temperature below -4 degrees C with a lifetime of 3 or 10 h. The new AMDE parametrization was used together with the general parametrization of mercury chemistry [Petersen, G.; Munthe, J.; Pleijel, K.; Bloxam, R.; Vinod Kumar, A. Atmos. Environ. 1998, 32, 829-843]. The obtained model results were compared with measurements of GEM at Station Nord. There was good agreement between the start and general features periods with AMDEs, although the model could not reproduce the fast concentration changes, and the correlation between modeled and measured values decreased from 2000 to 2001 and further in 2002. The modeled RGM concentrations over the Arctic in 2000 were found to agree well with the temporal and geographical variability of the boundary column of monthly average BrO observed by the GOME satellite. Scenario calculations were performed with and without AMDEs. For the area north of the Polar Circle, the mercury deposition increases from 89 tons/year for calculations without an AMDE to 208 tons/year with the AMDE. The 208 tons/year represent an upper limit for the mercury load to the Artic.     

A laboratory intercomparison of real-time gaseous ammonia measurement methods

Six different measurement methods (and seven instruments) for the measurement of gaseous ammonia at low part-per-billion levels were compared simultaneously in a laboratory setting. The instruments were the tunable diode laser (TDL) absorption spectrometer, the wet scrubbing long-path absorption photometer (LOPAP), the wet effusive diffusion denuder (WEDD), the ion mobility spectrometer (IMS), the Nitrolux laser acousto-optical absorption analyzer, and a modified chemiluminescence analyzer. With the exception of the modified chemiluminescence analyzer, the instruments performed well and, understable calibration conditions, generally agreed to within about 25% of the expected calibration value. Instrument time response is shown to be sensitive to measurement history as well as the sample handling materials and is shortest for the TDL. The IMS and Nitrolux are commercial instruments used without modification from the manufacturer. These two instruments have significantly slower time response than the TDL (especially in the case of the Nitrolux) and exhibited measurement biases of approximately +25% (IMS) and -25% (Nitrolux). The LOPAP and WEDD instruments, both research instruments using wet chemical methods, performed well in the calibration tests in terms of the absolute accuracy of measured concentrations, but the WEDD instrument suffered from significantly slower time response than the LOPAP.     

Onset of smoldering in cotton: Effects of density

The ignition temperature for smoldering in cotton has been determined for several densities. Experiments and consistent theoretical calculations show that an increase in density leads to decrease in ignition temperature. Experimentally it is found that repeated heating of a cotton sample results in a higher ignition temperature than for samples heated once, as a result of partial decomposition during heating. For the lowest density investigated, smoldering occurs but is not self-sustained. The smoldering front moves through the cotton with a velocity independent of the density. The mass loss rate due to smoldering increases with density. It can be concluded that density affects both the ignition temperatures and the mass loss rates in a systematic way.     

Simulation of energy use, human thermal comfort and office work performance in buildings with moderately drifting operative temperatures

Annual primary energy use in a central module of an office building consisting of two offices separated with a corridor was estimated by means of dynamic computer simulations. The simulations were conducted for conventional all-air VAV ventilation system and thermo active building system (TABS) supplemented with CAV ventilation. Simulations comprised moderate, hot–dry and hot–humid climate. Heavy and light wall construction and two orientations of the building (east–west and north–south) were considered. Besides the energy use, also capability of examined systems to keep a certain level of thermal comfort was examined. The results showed that with the moderate climate, the TABS decreased the primary energy use by about 16% as compared with the VAV. With hot–humid climate, the portion of the primary energy saved by TABS was ca. 50% even with the supply air dehumidification taken into account. The TABS working in a moderate climate kept the predicted percentage of dissatisfied (PPD) <10% during 60–80% of the working hours per year. Optimization of the TABS's control strategy (circulation pump dead-band, water supply temperature) resulted in significant reduction of the annual working hours with PPD > 10%; 1.4% in comparison to 17.5% h/yr. The highest estimated loss of occupants’ productivity related to their thermal sensation hasn’t exceeded 1% in whole year average.