Viscoelastic properties of phenolphthalein poly(ether ketone)

Stress relaxation and dynamic mechanical behavior of phenolphthalein poly(ether ketone) (PEK-C) have been investigated. Using Ferry's reduction method, the master curve was obtained. From the experimental results, we found that the WLF equation is not appropriate in the lower-temperature range (T < T_g). The relaxation spectrum was calculated according to the first approximation method proposed by Schwarzl and Staverman. In addition to the α-transition region, a second transition zone is revealed at low temperature. This transition is probably due to a restricted motion of its main chain. © 1995 John Wiley & Sons, Inc.     

丙二醇单甲醚丙酸酯合成体系的气相色谱分析

自行研制了氰乙基(25%,质量分数)甲基硅橡胶(XE-60)石英毛细管色谱柱。建立了对含游离酸的丙二醇单甲醚丙酸酯的色谱分析方法。该法具有分离效果好,分析速度快的优点。     

RuCl3一步催化氧化液相乙醇合成1,1-二乙氧基乙烷

首先考察了不同金属卤化物对乙醇一步液相氧化合成1,1-二乙氧基乙烷(DEE)的催化性能。结果表明,RuCl_3催化性能最好。然后考察了反应条件的影响,结果表明,以50 mL无水乙醇(0.86 mol)为反应物时,最佳催化反应条件为:反应温度120℃、氧气压力2MPa、反应时间3h、催化剂用量0.004%(以乙醇的物质的量为基准,下同)、搅拌速度600 r/min,此时乙醇转化率达到38.2%,DEE选择性达到78.9%。并且发现,Ru~(3+)不但对乙醇氧化成乙醛具有较高的催化活性,同时RuCl_3是一种温和的路易斯酸,可以较好地催化乙醇与乙醛的缩合反应。最后对RuCl_3催化剂的重复使用性进行了考察,催化剂重复使用20次后,依然有较高的催化活性。     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

多孔羟基磷灰石生物陶瓷的进展

多孔羟基磷灰石生物陶瓷是一种性能优异的人体硬组织修复材料，在植入界面后它具生物降解性，置入体内能逐步参与代谢以至最终与人体骨结合成一体。本文在综合大量国内外文献的基础上，阐述了多孔羟基磷灰石生物陶瓷的性质、研究和发展。     

深圳市大康河综合整治工程生态化治理研究

以大康河综合整治工程为背景对河道生态化整治进行研究,对工程涉及的防洪、水质、景观等基本现状进行评价,提出了生态治理的指导思想,并具体介绍了防洪、水质、景观等综合治理措施,通过对大康河的综合整治,使得工程既能满足防洪要求又能实现良好的生态景观效果。     

厦门杏林湾排涝泵站跨管线围堰设计方案探讨

针对厦门杏林湾泵站围堰需2次跨过三根市政管线的特点,结合工程区的地质条件、水文条件、围堰结构型式选择、现有施工水平等因素,对土、充灌砂、混凝土、浆砌块石、钢板桩等围堰型式进行分析,经多方案综合比选,提出了"桩基+盖板"的水上管线加固方案,不但可以有效控制管线变形,而且施工可操作性较强。     

山梨醇类聚丙烯成核剂的开发与应用研究进展

综述了山梨醇类聚丙烯成核剂产品在国内外的开发进展，介绍了该类成核剂在聚丙烯中的应用和效果，及其作用机理。     

二氧化硫浸锰制备高纯碳酸锰

采用湘潭低品位的贫软锰矿为原料，对二氧化硫气体湿法浸锰、浸出液除杂、碳化结晶制备高纯碳酸锰的工艺进行了研究。实验得到二氧化硫浸锰的最佳工艺条件为：浸锰温度150～155℃，液固质量比3：1，二氧化硫体积分数6％～7％、流速1．5～2．0mL／min，浸锰时间3．0～3．5h。按该条件浸锰，锰的浸出率可达95％以上。该工艺为贫软锰矿的开发利用及有色金属冶炼厂二氧化硫废气的综合治理开辟了一条新途径。