A Furnace Control System for Tracing Reference Reheating Curves

A control system for tracing the reference reheating curves of individual steel slabs in continuous furnaces is presented. The system enables the predefined, controllable reheating of slabs in a furnace. The slab temperatures are obtained by the simulation of a mathematical model of the slab‐reheating process. The interior of the continuous furnace is divided into six control zones. The individual zone temperatures are adjusted by the control system in such a way that the temperatures of the slabs in the zone are as close as possible to the desired slab temperatures. To take into account delays in the production line and to synchronize the furnace with the rolling mill's capacities, a time shift of the reference reheating curves and a prolonged drop‐out interval are introduced.     

Reduction of Postharvest Decay of Peach and Nectarine Caused by Monilinia laxa Using Hot Water Dipping

The effect of hot water dipping (HWD) at 40, 44 and 48 °C for 6 and 12 min on germination of conidia of brown rot fungus (Monilinia laxa) in vitro and the effect of HWD at 48 °C for 6 and 12 min on the fruit quality and development of M. laxa on peach cv. “Roig” and nectarine cv. “Venus” after artificial inoculation in cold storage were studied. Temperature and duration of treatment significantly affected germination of conidia. After HWD at 48 °C for 12 min, the lowest germination of conidia (9%) was recorded, which was more than 10 times lower than control (93%). After 3 days from inoculation, there were 80% of inoculated spots with visual symptoms of decay caused by M. laxa on control peaches and 40% of such spots on control nectarines. Successful infections were recorded on only 5% of inoculated spots of nectarine and 10% of inoculated spots of peach after HWD at 48 °C for 12 min. HWD at 48 °C for 12 min significantly decreased titratable acidity and increased soluble solids concentration/titratable acidity ratio in nectarines. No visual symptoms of heat damage were found on fruits as a consequence of any of the studied treatments. The results show that it is possible to control postharvest brown rot (M. laxa) on peach using HWD at 48 °C for 12 min and on nectarine using HWD at 48 °C for 6 min without a significant loss of fruit quality.     

Experience on Pre-Series and Series Production of LHC Dipoles Cold Masses in ASG Superconductors

In 1986 Ansaldo Magnet Dept. (now ASG Superconductors) started, in cooperation with CERN, the design activities of the first 1 m-8 T LHC prototype dipoles. After several design steps and the manufacturing of 1+3 prototype dipoles 10 m long, the final design configuration 15 m long was defined by CERN. During the following years, a very close collaboration with CERN engineers and technicians lead to define the parameters about the most critical manufacturing processes, in particular winding of s.c. cable, collaring of coils, cold mass welding and test procedures. In the meantime, installation and commissioning of all the manufacturing plants followed: winding machines, curing presses, collaring press and welding press were installed, as well as geometrical measurements stations and vacuum chamber for leak test. Finally two manufacturing halls were fully dedicated to LHC dipoles production. At the beginning of year 2002, all the manufacturing plants were coming to be operational, ready to start the large scale production of LHC cold masses: 30 pre-series, 386 series and 30 spare cold masses have been produced till May 2007, to get a total number of 446 cold masses. In this paper we summarize all the data collected during a five years production: main manufacturing data, test results and production rate are presented. Final results about tests performed at CERN in superfluid He at 1.9 K are also included as well as correlation between test result and manufacturing rate.     

Extrusion of a hard-to-cook bean (Phaseolus vulgaris L.) and quality protein maize (Zea mays L.) flour blend

Heated extrusion was tested as an alternative process for incorporating “hard-to-cook” beans into food products. A 3² factorial design was used to evaluate extrusion conditions for a 40/60 (w/w) blend of “hard-to-cook” beans and quality protein maize. Tested extrusion variables were temperature (155, 170 and 185 °C) and moisture content (15.5, 17.5 and 19.5 g/100 g). Screw speed was fixed at 130 rpm. The extrudates obtained at 155 and 170 °C with 15.5% moisture had the best physical characteristics and were chosen for comparative analysis of nutritional changes between the unprocessed “hard-to-cook” bean/quality protein maize flour blend and the resulting extrudates. In vitro protein digestibility was higher in the extrudates (80%) than in the flour blend (76%). In vitro starch digestibility was higher at 155 °C (89%) and 170 °C (92%) than in the flour blend (12%). Processing conditions decreased dietary fibre content by 38% at 155 °C and 44% at 170 °C.     

Thermal stability of poly(methyl methacrylate-co-butyl acrylate) and poly(styrene-co-butyl acrylate) polymers

Thermal stability of poly(methyl methacrylate-co-butyl acrylate) and poly(styrene-co-butyl acrylate) modified with a small amount of acrylic acid and/or N-methylolacrylamide as a crosslinking agent was studied in this work. Programmed thermogravimetric analysis has been used to study the effect of copolymer composition on thermal stability, over a temperature range from 50 to 450°C, under a constant flow of nitrogen. Kinetic parameters of thermal degradation, activation energy, pre-exponential factor, and reaction order were obtained by using MacCallum-Tanner's approach. Kinetic data indicate that the thermal degradation of the investigated copolymer systems is the first order reaction, and that the increase of activation energy may be an indication of thermal stability changes in copolymer systems.     

Thermally stimulated oxidative degradation of high impact polystyrene with nitric acid

The practical application of high impact polystyrene (HIPS) depends on the resistance to aging in aggressive environments. The investigation of morphological, mechanical, and chemical properties was made on HIPS samples of various thickness. The property deterioration of HIPS caused by concentrated nitric acid and heat was studied. The diffusion through micropores formed visible cracks that finally led to the complete destruction into a powder. The rapid loss in mechanical properties was explained in terms of scission reaction of the graft polybutadiene (PB) with the homopolystyrene (PS) matrix. Comparative measurements of pure PS and PB under the same conditions were helpful in resolving parallel reactions that preferentially take place in PS and/or in PB sequences. It was established that higher degree of nitration caused by higher temperature results in increased insolubility owing to parallel crosslinking reactions. The nitric acid attack on HIPS caused scission reactions, which also led to the oxidative degradation, more pronounced in the PS phase in the soluble part of HIPS.     

Rheology and morphology of poly(vinyl acetate) + calcite films

We have studied mechanical and rheological behavior of poly(vinyl acetate) (PVAC) composites filled with calcite as a function of filler particle geometry, particle size distribution, and active surface area. Detailed morphological characteristic were investigated. Tensile properties of PVAC composites were evaluated in the composition range 5–20 wt% calcite. The elongation at break decreases as consequence of matrix mobility restriction by filer particles. By contrast, the strength at break increases as a result of fewer stress concentration points produced by small calcite particles. Large calcite particles decrease the strength of the PVAC composite because of lack of structural continuity. Failure is then dominated by the dewetting. Understanding the deformation as it relates to structure, mechanism of failure, and strength of interactions makes development of improved PVAC composites for adhesives possible.     

How to Study Biofilms after Microbial Colonization of Materials Used in Orthopaedic Implants

Over the years, various techniques have been proposed for the quantitative evaluation of microbial biofilms. Spectrophotometry after crystal violet staining is a widespread method for biofilm evaluation, but several data indicate that it does not guarantee a good specificity, although it is rather easy to use and cost saving. Confocal laser microscopy is one of the most sensitive and specific tools to study biofilms, and it is largely used for research. However, in some cases, no quantitative measurement of the matrix thickness or of the amount of embedded microorganisms has been performed, due to limitation in availability of dedicated software. For this reason, we have developed a protocol to evaluate the microbial biofilm formed on sandblasted titanium used for orthopaedic implants, that allows measurement of biomass volume and the amount of included cells. Results indicate good reproducibility in terms of measurement of biomass and microbial cells. Moreover, this protocol has proved to be applicable for evaluation of the efficacy of different anti-biofilm treatments used in the orthopaedic setting. Summing up, the protocol here described is a valid and inexpensive method for the study of microbial biofilm on prosthetic implant materials.     

Circuiti autonomi nonsingolari din elementi binari,realizzabili medianten elementi a soglia

The linear separability concepts are applied in order to give either necessary or sufficient conditions for realizability by exactlyn threshold elements of a given coded cycle set of an autonomous nonsingular sequential circuit, specified byn boolean functions. Two main classes are obtained, the self-dual and the pure majority classes corresponding respectively to a necessary and to a sufficient condition. Also “necklace” circuits are described which exhibit remarkable properties. The number ofrealizable, non singular autonomons circuits are enumerated up ton=5, and one investigates also the capability of circuits ofn threshold elements to perform a state cycle of length2 ⁿ. Finally, in Appendix I, a constructive method to generate a non singular transition table is given.

---

---

Questa ricerca è stata finanziata in parte dall' U.S.A.F. sotto il Grant n. 65-44 tramite l'European Office, Office of Aerospace Research-Brnxelles.