A practical eco-environmental distribution network planning model including fuel cells and non-renewable distributed energy resources

This paper presents a long-term dynamic multi-objective planning model for distribution network expansion along with distributed energy options. The proposed model optimizes two objectives, namely costs and emissions and determines the optimal schemes of sizing, placement and specially the dynamics (i.e., timing) of investments on distributed generation units and network reinforcements over the planning period. An efficient two-stage heuristic method is proposed to solve the formulated planning problem. The effectiveness of the proposed model is demonstrated by applying it to a distribution network and comparing the simulation results with other methods and models.     

Hybrid cascode compensation with feedforward stage for high-speed area-efficient three-stage CMOS amplifiers

Hybrid cascode feedforward compensation (HCFC) is proposed for low-power area-efficient three stage amplifiers driving large capacitive loads. With no overhead in power or area, the total compensation capacitor is divided and shared between two internal high-speed loops instead of solely one loop as is common in prior art. Detailed analysis of HCFC shows significant improvement in terms of stability and bandwidth. This is verified for a 1.2-V amplifier driving a 500-pF capacitive load in 90-nm CMOS technology, where HCFC reduces the total capacitor size and improves the gain-bandwidth by at least 30 and 40 %, respectively, compared to the prevailing schemes.     

SOLUTION OF POPULATION BALANCE EQUATIONS IN EMULSION POLYMERIZATION USING METHOD OF MOMENTS

In this work, the method of moments is used for solution of population balance equations appearing in modeling of emulsion polymerization (EP). The zero-one model without coagulation effect and the pseudo-bulk model including coagulation effect are investigated as two common approaches for modeling EP processes. The fixed quadrature method is used to close the set of moment equations, and the maximum entropy approach is applied to reconstruct the particle size distribution from a finite number of its moments. Comparing the results with those obtained by the high-precision finite volume technique indicates that, despite the low computational load of the moment method, it has an acceptable accuracy. These features support use of the moment technique for other applications such as on-line control or optimization in particulate processes.     

Iron oxide/gold nanoparticles‐decorated reduced graphene oxide nanohybrid as the thermo‐radiotherapy agent

The main focus of the current study is the fabrication of a multifunctional nanohybrid based on graphene oxide (GO)/iron oxide/gold nanoparticles (NPs) as the combinatorial cancer treatment agent. Gold and iron oxide NPs formed on the GONPs via the in situ synthesis approach. The characterisations showed that gold and iron oxide NPs formed onto the GO. Cell toxicity assessment revealed that the fabricated nanohybrid exhibited negligible toxicity against MCF‐7 cells in low doses (<50 ppm). Temperature measurement showed a time and dose‐dependent heat elevation under the interaction of the nanohybrid with the radio frequency (RF) wave. The highest temperature was recorded using 200 ppm concentration nanohybrid during 40 min exposure. The combinatorial treatments demonstrated that the maximum cell death (average of 53%) was induced with the combination of the nanohybrid with RF waves and radiotherapy (RT). The mechanistic study using the flow cytometry technique illustrated that early apoptosis was the main underlying cell death. Moreover, the dose enhancement factor of 1.63 and 2.63 were obtained from RT and RF, respectively. To sum up, the authors’ findings indicated that the prepared nanohybrid could be considered as multifunctional and combinatorial cancer therapy agents.Inspec keywords: radiation therapy, toxicology, gold, biomedical materials, nanofabrication, nanoparticles, iron compounds, cancer, nanomedicine, cellular biophysics, tumours, graphene compounds, biothermicsOther keywords: graphene oxide nanohybrid, combinatorial cancer treatment agent, cell toxicity assessment, MCF‐7 cells, dose‐dependent heat elevation, multifunctional cancer therapy agents, thermoradiotherapy agent, graphene oxide‐iron oxide‐gold nanoparticles, temperature measurement, radiofrequency wave, flow cytometry, time 40.0 min, CO‐FeO‐Au     

A game equilibrium model of a retail electricity market with high penetration of small and mid-size renewable suppliers

Game theory has provided a practical tool to model players' strategic behavior in electricity markets, particularly as the world moves towards a more competitive market. A game theoretic approach can be used to find the clearing electricity price in a retail electricity market with a high penetration of small and mid-size renewable suppliers.     

Outage Probability Based Robust Distributed Beam-Forming in Multi-User Cooperative Networks with Imperfect CSI

In this paper, a new robust problem is proposed for relay beamforming in relay system with stochastic perturbation on channels of multi user and relay network. The robust problem aims to minimize the transmission power of relay nodes while the imperfect channel information (CSI) injects stochastic channel uncertainties to the parameters of optimization problem. In the power minimization framework, the relays amplification weights and phases are optimized assuming the availability of Gaussian channel distribution. The power sum of all relays is minimized while the outage probability of the instantaneous capacity (or SINR) at each link is above the outage capacity (or SINR) for each user. The robust problem is a nonconvex SDP problem with Rank constraint. Due to the nonconvexity of the original problem, three suboptimal problems are proposed. Simulation and numerical results are presented to compare the performance of the three proposed solutions with the existing worst case robust method.     

Luminescence properties of monoclinic Cu4I4(Piperidine)4

A new modification of Cu₄I₄Pip₄ has been synthesized under hydrothermal conditions. X-ray crystallography revealed that this compound crystallized in the monoclinic system and consists of a tetrahedral core with composition Cu₄I₄, in which each Cu atom is coordinated by a piperidine molecule via the N atom. In contrast to a previously reported modification of Cu₄I₄Pip₄, the present modification shows luminescent properties when exposed to UV-light. In addition, we have used time-dependent density functional theory calculations to characterize both compounds in term of both absorption and emission.     

Deconstructing the Effects of Matrix Elasticity and Geometry in Mesenchymal Stem Cell Lineage Commitment

A wide variety of environmental factors including physical and biochemical signals are responsible for stem cell behavior and function. In particular, matrix elasticity and cell shape have been shown to determine stem cell function, yet little is known about the interplay between how these physical cues control cell differentiation. For the first time, by using ultraviolet (UV) lithography to pattern poly(ethylene) glycol (PEG) hydrogels, it is possible to manufacture microenvironments capable of parsing the effects of matrix elasticity, cell shape, and cell size in order to explore the relationship between matrix elasticity and cell shape in mesenchymal stem cell (MSC) lineage commitment. These data show that cells cultured on 1000 μm² circles, squares, and rectangles are primarily adipogenic lineage regardless of matrix elasticity, while cells cultured on 2500 and 5000 μm² shapes more heavily depend on shape and elasticity for lineage specification. It is further characterized how modifying the cell cytoskeleton through pharmacological inhibitors can modify cell behavior. By showing MSC lineage commitment relationships due to physical signals, this study highlights the importance of cell shape and matrix elasticity in further understanding stem cell behavior for future tissue engineering strategies.     

Quantitative automated inspection of standard parts using machine vision

On line automated visual inspection for quality and process control is becoming a very important requirement in an automated manufacturing environment. This paper examines the possibility of real-time inspection of standard part using machine vision.     

Finite element modelling the mechanical performance of pressure garments produced from elastic weft knitted fabrics

Compression garments mainly produced from elastic knitted fabrics have attracted many attentions due to their medical care performances. Components’ characteristics of the pressure garments such as yarn and fabric structure affect significantly the pressure applied on the human body. In this paper, it is aimed to simulate the effect of yarn’s mechanical properties as well as fabric structure on mechanical performance of the compression garment. For this purpose, a precise geometrical model for fabric structure is needed by which the pressure applied to the body could be predicted. Accordingly, double jersey knitted fabrics containing elastane weft yarns were produced on an electronic flat knitting machine and the fabric tensile properties were measured in course direction. Using equations governing the fabric structural unit-cell, a real geometric model was created in a finite element software environment. Considering the linear visco-elastic properties for elastane weft yarn, stress-strain curve was extracted. The results obtained from numerical simulation were compared with the experimental data in order to validate the proposed geometrical model. The findings demonstrate a good agreement between experimental and simulation results.