Transmission of Bacterial Zoonotic Pathogens between Pets and Humans: The Role of Pet Food

Recent Salmonella outbreaks associated with dry pet food and treats raised the level of concern for these products as vehicle of pathogen exposure for both pets and their owners. The need to characterize the microbiological and risk profiles of this class of products is currently not supported by sufficient specific data. This systematic review summarizes existing data on the main variables needed to support an ingredients-to-consumer quantitative risk model to (1) describe the microbial ecology of bacterial pathogens in the dry pet food production chain, (2) estimate pet exposure to pathogens through dry food consumption, and (3) assess human exposure and illness incidence due to contact with pet food and pets in the household. Risk models populated with the data here summarized will provide a tool to quantitatively address the emerging public health concerns associated with pet food and the effectiveness of mitigation measures. Results of such models can provide a basis for improvements in production processes, risk communication to consumers, and regulatory action.     

Critical Role for the Protons in FRTL-5 Thyroid Cells: Nuclear Sphingomyelinase Induced-Damage

Proliferating thyroid cells are more sensitive to UV-C radiations than quiescent cells. The effect is mediated by nuclear phosphatidylcholine and sphingomyelin metabolism. It was demonstrated that proton beams arrest cell growth and stimulate apoptosis but until now there have been no indications in the literature about their possible mechanism of action. Here we studied the effect of protons on FRTL-5 cells in culture. We showed that proton beams stimulate slightly nuclear neutral sphingomyelinase activity and inhibit nuclear sphingomyelin-synthase activity in quiescent cells whereas stimulate strongly nuclear neutral sphingomyelinase activity and do not change nuclear sphingomyelin-synthase activity in proliferating cells. The study of neutral sphingomyelinase/sphingomyelin-synthase ratio, a marker of functional state of the cells, indicated that proton beams induce FRTL-5 cells in a proapoptotic state if the cells are quiescent and in an initial apoptotic state if the cells are proliferating. The changes of cell life are accompanied by a decrease of nuclear sphingomyelin and increase of bax protein.     

Coupling Interrupted Fischer and Multicomponent Joullié-Ugi to Chase Chemical Diversity: from Batch to Sustainable Flow Synthesis of Peptidomimetics

The generation of peptidomimetic substructures for medicinal chemistry purposes requires effective and divergent synthetic methods. We present in this work an efficient flow process that allows quick modulation of reagents for Joullié-Ugi multicomponent reaction, using spiroindolenines as core motifs. This sterically hindered imine equivalent could successfully be diversified using various isocyanides and amino acids in generally good space-time yields. A telescoped flow process combining interrupted Fischer reaction for spiroindolenine synthesis and subsequent Joullié-Ugi-type modification resulted in product formation in very good overall yield in less than 2 hours compared to 48 hours required in batch mode. The developed protocol can be seen as a general tool for rapid and facile generation of peptidomimetic compounds. We also showcase preliminary biological assessments for the prepared compounds.     

Experimental study on micro manufacturing of carbon nanotube (CNT) plastic composites

In recent years, innovative materials such as carbon nanotube composites are finding growing interest in several industrial sectors, from sports and leisure to electronics, automotive, aircraft, and defence. The reinforcing influence of the carbon nanotube is of prime interest. However, technological issues concerning the production methods and the manufacturing processes of carbon nanotube components limit the industrial application of this innovative and interesting material, especially whether small features are required. For this reason, manufacturing strategy involving new production technologies must be designed and developed. This paper studies the challenges of a manufacturing chain based on two manufacturing processes: injection moulding and micro milling. A case study based on these innovative processes is reported and discussed. The propagation chain effect and the influence of each considered process parameter on cutting force and geometrical accuracy of the features (the key characteristics of the process chain) were assessed by means of statistical analysis of variance (ANOVA). The ANOVA analysis demonstrated that cutting forces in micro milling are mainly influenced by the material and percentage of carbon nanotubes, while the main parameter influencing the geometrical accuracy of micro features is the matrix material.     

Validation of hot ring rolling industrial process 3D simulation

Ring rolling is a hot forming process used in the production of railway tyres, anti friction bearing races and different ring shaped work pieces for automotive energy production and aerospace applications. The advantages of ring rolling process include short production time, uniform quality, closed tolerances, good material quality and considerable saving in material cost. Despite the benefits some problems still exist according to a correct selection of the process parameters. Due to the nature of the process different rolling mills (driving, idle and axial rolls) are involved and the correct selection of the process parameters is not so feasible. Moreover an experimental approach to solve this problem risks to be more expensive. Actually FE codes are available to simulate the non linear problem that characterizes a ring rolling process. In this work a FE model, based on Deform 3D software, was tested versus experimental results acquired from an industrial plant. The accuracy of the FE model was analyzed through a dual comparison: by geometrical and by physical aspects. A good agreement was found between experimental and numerical results for both comparisons and, as a consequence, this code could be used in order to investigate and optimize the process parameters that characterize the ring rolling process in a virtual not expensive environment. The validated model will allow the studies of more environment-friend process configurations.     

Pragmatism or idealism? An urban perspective onto the politics of interurban cooperation for sustainability in the EU

European cities have been committed to achieve urban sustainability, participating in interurban networks dealing with socio-ecological issues. By examining the incentives derived by the involvement in these networks and the municipal political milieu where the decision about network participation is taken, this article seeks to understand the motivations for European cities to take part in sustainability networks. To do so, a small-N qualitative analysis was undertaken. The results show that cities’ participation in socio-ecological urban networks (SEUNs) is motivated by the economic, political and formative incentives that membership provides, and is influenced by institutionalised values, political agency and previous cooperative experience.     

Molecularly imprinted polymers by phase inversion technique for the selective recognition of saccharides of biomedical interest in aqueous solutions

The purpose of this work was the preparation and characterization of polymeric membranes for the selective recognition of saccharides using molecular imprinting technology associated with phase inversion. A system able to bind saccharides with high selectivity is particularly important in the pharmaceutical sector, since some of these compounds are constituents of molecules which can exert serious toxic effects even at very low concentrations. Two polymeric matrices were prepared using poly(ethylene‐co‐vinyl alcohol) copolymers, with an ethylene molar content of 32% and 44%, and were imprinted with two different saccharide molecules: maltose and 2‐keto‐3‐deoxy‐d ‐manno‐octulosonate (KDO). Matrices imprinted against maltose and KDO showed an easy template extraction, high binding capability and satisfactory selectivity, particularly for the matrix with an ethylene molar content of 44%. © 2017 Society of Chemical Industry     

Dietary krill oil increases docosahexaenoic acid and reduces 2-arachidonoylglycerol but not N-acylethanolamine levels in the brain of obese Zucker rats

Evidence suggests that dietary long chain polyunsaturated fatty acids (LCPUFAs), and particularly those belonging to the n-3 family, may influence the brain fatty acid profile and, thereby, the biosynthesis of endocannabinoids in rodents. However, the doses used are usually quite high and not comparable with human intake. Recently, we have shown that relatively low doses of dietary n-3 LCPUFAs (4 weeks), in the form of either fish or krill oil, balanced for EPA and DHA content, and against a control diet with no EPA and DHA and similar contents of oleic, linoleic and α-linolenic acids, lower the concentrations of the endocannabinoids, anandamide (AEA) and 2-arachidonoylglycerol (2-AG), in the visceral adipose tissue, and of AEA in the liver and heart, of obese Zucker rats. This, in turn, is associated with lower levels of arachidonic acid in membrane phospholipids and with amelioration of some metabolic syndrome parameters. We investigated here whether in Zucker rats, under the same conditions, fish and krill oil are also able to influence LCPUFA and endocannabinoid profiles in brain. Only krill oil was able to increase significantly DHA levels in brain phospholipids, with no changes in arachidonic acid. DHA increase was associated with lower levels of 2-AG in the brain, whereas AEA and its congeners, N-palmitoylethanolamine and N-oleoylethanolamine, were unchanged. We conclude that, despite the strong impact of dietary n-3 fatty acid on endocannabinoid levels previously observed in peripheral tissues, in the brain only 2-AG is affected by dietary krill oil, suggesting that the beneficial effect of the latter on the metabolic syndrome is mostly exerted by modifying peripheral endocannabinoids. Nevertheless, possible effects of dietary krill oil in the brain through modification of 2-AG levels deserve further investigation.     

Ultraviolet B (UVB) Irradiation-Induced Apoptosis in Various Cell Lineages in Vitro

Ultraviolet B (UVB) radiation acts as a strong apoptotic trigger in many cell types, in tumor and normal cells. Several studies have demonstrated that UVB-induced cell death occurs through the generation of reactive oxygen species. The consequent oxidative stress includes the impairment of cellular antioxidants, the induction of DNA damage and the occurrence of apoptosis. In this review, we investigated UVB apoptotic action in various cell models by using ultrastructural, molecular and cytofluorimetric techniques. Myeloid leukemia HL-60, T-lymphoblastoid Molt-4 and myelomonocytic U937 human cells, generally affected by apoptotic stimuli, were studied. Human chondrocytes and C2C12 skeletal muscle cells, known to be more resistant to damage, were also considered. All of them, when exposed to UVB radiation, revealed a number of characteristic apoptotic markers. Membrane blebbing, cytoplasm shrinkage and chromatin condensation were detected by means of electron microscopy. DNA cleavage, investigated by using agarose gel electrophoresis and TUNEL reaction, was observed in suspended cells. Differently, in chondrocytes and in skeletal muscle cells, oligonucleosomic DNA fragmentation did not appear, even if a certain TUNEL positivity was detected. These findings demonstrate that UVB radiation appears to be an ideal tool to study the apoptotic behavior.