Google Scholar Metrics evolution: an analysis according to languages

In November 2012 the Google Scholar Metrics (GSM) journal rankings were updated, making it possible to compare bibliometric indicators in the ten languages indexed—and their stability—with the April 2012 version. The h-index and h-5 median of 1,000 journals were analysed, comparing their averages, maximum and minimum values and the correlation coefficient within rankings. The bibliometric figures grew significantly. In just seven and a half months the h-index of the journals increased by 15 % and the median h-index by 17 %. This growth was observed for all the bibliometric indicators analysed and for practically every journal. However, we found significant differences in growth rates depending on the language in which the journal is published. Moreover, the journal rankings seem to be stable between April and November, reinforcing the credibility of the data held by Google Scholar and the reliability of the GSM journal rankings, despite the uncontrolled growth of Google Scholar. Based on the findings of this study we suggest, firstly, that Google should upgrade its rankings at least semi-annually and, secondly, that the results should be displayed in each ranking proportionally to the number of journals indexed by language.     

Hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (αs1-, β- and k-casein) after enzymatic hydrolysis with pepsin and enzymatic extract from Pleurotus eryngii

The aim of this study was to estimate the hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (α_s1-, β- and k-casein) after in vitro digestion with two different enzymatic systems: pepsin from porcine gastric mucosa (EP) and a crude enzymatic extract from the edible mushroom Pleurotus eryngii. The used enzymes showed a different mode of casein catalysis with a consequent production of peptides of different antioxidant activity. The CN haplotype significantly influenced peptides production; in fact, the amino acid substitutions caused by genetic polymorphisms at the α_s1-, β- and k-CN loci influenced the sites of enzymatic cleavage and therefore the produced peptides. The above is evidenced by the different antioxidant activity found in the hydrolysates depending on the used enzymatic system, the CN haplotype, and the CN haplotype × enzymatic treatment interaction. The findings of this study are a perspective for the production of specific foods that exert a biological effect in addition to the nutritional one.     

Quality assessment of commercial paprikas

Several quality parameters of smoked, oven‐dried and sun‐dried paprikas were studied. Smoked paprikas showed the highest American Spice Trade Association (ASTA) units and pigment concentrations, whereas oven‐dried paprikas showed the best browning index and red/yellow pigment ratio, and sun‐dried paprikas had the highest redness for reflected colour. The colour stability results showed drastic overall colour change (ΔE) and decreased redness and ASTA units of the sun‐dried and oven‐dried paprikas after two and 5 days of UV exposure. Degradation of the smoked paprika colour parameters was progressive, and they showed less degradation even after 30 days. The evaluation of the antioxidant activity showed higher DPPH radical‐scavenging capacity in the smoked samples. The profiles of volatile phenolic compounds of the smoked samples are responsible for the differences in the antioxidant capacity. The great differences in colour stability and antioxidant activity make smoked paprika the best choice for use in the food industry.     

Dynamic modeling of a dual active bridge DC to DC converter with average current control and load‐current feed‐forward

Bidirectional power flow is needed in many power conversion systems like energy storage systems, regeneration systems, power converters for improvement of the power quality and some DC‐DC applications where bidirectional high power conversion and galvanic isolation are required. The dual active bridge (DAB) is an isolated, high voltage ratio DC‐DC converter suitable for high power density and high power applications, being a key interface between renewable energy sources and energy storage devices. This paper is focused on the modeling and control design of a DC‐DC system with battery storage based on a DAB converter with average current mode control of the output current and output voltage control. The dynamic response of the output voltage to load steps is improved by means of an additional load‐current feed‐forward control loop. An analytical study of the load‐current feed‐forward is presented and validated by means of both simulations and experimental results. Copyright © 2014 John Wiley & Sons, Ltd.     

Utilization of ramon seeds (Brosimum alicastrum swarts) as a new source material for thermoplastic starch production

The development and characterization of biodegradable polymers deriving from renewable natural sources has attracted much attention. The aim of this work was to partially characterize a thermoplastic starch obtained from the starch of seeds from the ramon tree (TPS‐RS) as an option to substitute thermoplastic starch from corn (TPS‐CS), in some of its applications. At 55% of relative humidity (RH), TPS‐RS had higher tensile strength and deformation than TPS‐CS. X‐ray diffraction analysis showed similar values in residual crystallinity (percentage of crystallinity that remains after plasticization process) in both TPS. The SEM micrographs showed a few remnant granular structures in the TPS‐RS. The FTIR showed a greater intensity in band at 1016 cm^?1 in the TPS‐CS and TPS‐RS in comparison with their corresponding native starch, indicating an increase in the amorphous region after plasticization. The TGA analysis showed greater thermal stability in TPS‐CS (340 °C) compared with TPS‐RS (327 °C). In addition, the glass transition temperature in both TPS was 24 °C. The results obtained represent a starting point to potentialize the use of TPS‐RS instead of TPS‐CS for the development of new biodegradable materials for practical applications in different areas. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44235.     

Assessment of a Cylindrical and a Rectangular Plate Differential Mobility Analyzer for Size Fractionation of Nanoparticles at High-Aerosol Flow Rates

An existing differential mobility analyzer (DMA) of cylindrical electrodes and a novel DMA of rectangular plate electrodes are demonstrated for size fractionation of nanoparticles at high-aerosol flow rates in this work. The two DMAs are capable of delivering monodisperse size selected nanoparticles (SMPS σ_g < 1.1) at gas flow rates ranging from 200 slm to 500 slm. At an aerosol flow rate of 200 slm, the maximum attainable particle mean size is of about 20 nm for the cylindrical DMA and of nearly 50 nm for the rectangular plate DMA. The number concentration of the monodisperse nanoparticles delivered by the high-flow DMAs spans from 10⁴ cm^?3 to 10⁶ cm^?3 depending upon the particle mean size and particle size dispersion.

Copyright 2014 American Association for Aerosol Research     

Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.