Identification of New Coloured Anthocyanin–Flavanol Adducts in Pressure-Extracted Pomegranate (<Emphasis Type="BoldItalic">Punica granatum</Emphasis> L.) Juice by High-Performance Liquid Chromatography/Electrospray Ionization Mass Spectrometry

Pomegranate (Punica granatum L.) juice, obtained by pressure extraction of the whole fruit, contains coloured flavanol–anthocyanin adducts (the flavanol occupies the upper part of the dimmer) from the direct condensation between anthocyanidins delphinidin, cyanidin and pelargonidin and flavan-3-ols (epi)gallocatechin, (epi)catechin and (epi)afzelechin. The presence of adducts between these same flavanols and anthocyanidins, but belonging to the coloured anthocyanin–flavanol adduct type (anthocyanin occupies the upper part of the dimmer) has been revealed by reversed-phase liquid chromatography coupled to tandem mass spectrometry (ion trap), with positive electrospray ionization (LC–ESI/MS ⁿ ). These new adducts are isotopic with their corresponding counterparts (flavanol–anthocyanin adducts) and indistinguishable from them by comparison of the mass spectra from the MS² of the isotopic parent ions. However, they can be distinguished by comparison of the mass spectra from the MS³ of their corresponding isotopic aglycons. Hence, the MS³ of the aglycon from a given flavanol–anthocyanin adduct always yields a mass spectrum containing five characteristic ions, the three with smaller m/z being only dependent on the anthocyanidin and the other two on both the anthocyanidin and the flavanol. In contrast, the mass spectrum from the MS³ of the aglycon of its counterpart anthocyanin–flavanol adduct gives only two of the above five characteristic ions, where the ion with smaller m/z only depends on the anthocyanidin and the other on both the anthocyanidin and the flavanol. Ten 3-hexoside derivatives of coloured anthocyanin–flavanol adducts were detected in pomegranate juice being reported for the first time this type of adducts from a natural source.     

The effect of ultra-thin graphite on the morphology and physical properties of thermoplastic polyurethane elastomer composites

Composites of thermoplastic polyurethane (TPU) and ultra-thin graphite (UTG) with concentrations ranging from 0.5 wt.% to 3 wt.% were prepared using a solution compounding strategy. Substantial reinforcing effects with increased loadings are achieved. Compared to neat TPU, values for storage modulus and shear viscosity are enhanced by 300% and 150%, respectively, for UTG concentrations of 3 wt.%. Additionally, an enhancement of thermal properties is accomplished. The crystallization temperature and thermal stability increased by 30 °C and 10 °C, respectively, compared to neat TPU. Furthermore, the use of oxidized UTG (UTGO) with its added functional oxygen groups suggests the presence of chemical interactions between UTG and TPU, which additionally impact on the thermal properties of the corresponding composites. Controlling the oxidation degree, thus offers further possibilities to obtain composites with tailored properties. The presented approach is straightforward, leads to homogeneous TPU-UTG composites with improved materials properties and is especially suitable for commercial UTG materials and further up-scaled production.     

Which App? A recommender system of applications in markets: Implementation of the service for monitoring users’ interaction

Users face the information overload problem when downloading applications in markets. This is mainly due to (i) the increasing unmanageable number of applications and (ii) the lack of an accurate and fine-grained categorization of the applications in the markets. To address this issue, we present an integrated solution which recommends to the users applications by considering a big amount of information: that is, according to their previously consumed applications, use pattern, tags used to annotate resources and history of ratings. We focus this paper on the service for monitoring users’ interaction.     

A hybrid,auto-adaptive and rule-based multi-agent approach using evolutionary algorithms for improved searching

Selecting the most appropriate heuristic for solving a specific problem is not easy, for many reasons. This article focuses on one of these reasons: traditionally, the solution search process has operated in a given manner regardless of the specific problem being solved, and the process has been the same regardless of the size, complexity and domain of the problem. To cope with this situation, search processes should mould the search into areas of the search space that are meaningful for the problem. This article builds on previous work in the development of a multi-agent paradigm using techniques derived from knowledge discovery (data-mining techniques) on databases of so-far visited solutions. The aim is to improve the search mechanisms, increase computational efficiency and use rules to enrich the formulation of optimization problems, while reducing the search space and catering to realistic problems.     

A fuzzy aid rear-end collision warning/avoidance system

To decrease traffic accidents is a declared target of Intelligent Transportation Systems (ITS). Among them, rear-end collisions are one of the most common and constitute one of the as yet unsolved topics in the automotive sector. This paper presents an approach to the avoidance of rear-end collisions in congested traffic situations. To this end, two fuzzy controllers, a Collision Warning System (CWS) and a Collision Avoidance System (CAS), have been developed. The former is in charge of alerting the driver in case of an impending rear-end collision to prevent or mitigate the crash. The latter is in charge of generating an output control signal for the steering wheel in order to avoid the collision. Both CWS and CAS have been tested with real cars using vehicle-to-infrastructure (V2I) communications to acquire data of vehicles. A system installed in the infrastructure capable of assessing road traffic conditions in real time is responsible for transmitting the data of the vehicles in the surrounding area. The systems have been tested at the Center for Automation and Robotics (CAR)’s facilities with two mass-produced cars.     

Modelling diffusion and adsorption of As species in Fe/GAC adsorbent beds

BACKGROUND: Arsenic decontamination of drinking water by adsorption is a simple and robust operation. When designing packed bed adsorbers for arsenic, the main problems are the slow diffusion kinetics of As in microporous media and the lack of simple equations for predicting the performance of the equipment. Commercial iron‐doped granular activated carbon adsorbents (Fe/GAC) for groundwater arsenic abatement were studied in this work. Basic parameters for arsenate (As^V) adsorption were measured and their performance at larger scale was simulated with an approximate analytical model. RESULTS: In the 0–300 µg_As L^?1 range, the As^V adsorption isotherm on Fe/GAC was found to be approximately linear. Assuming Henry's law for adsorption and homogeneous surface diffusion with constant diffusivity for intrapellet mass transfer, an approximate model for flow and adsorption of arsenate inside packed bed adsorbers was developed, and reduced to an analytic compact solution using the quasi‐lognormal distribution (Q‐LND) approximation. The use of this model with fitted and reported parameters enabled the approximate simulation of industrial adsorbers and home point‐of‐use filters. Results show that industrial adsorbers meet the breakthrough condition with incomplete utilization of the adsorbent unless convenient process configurations are used. In point‐of‐use systems with short residence times intraparticle diffusion would drastically reduce the adsorbent performance. CONCLUSION: Assuming linear adsorption of As^V over Fe/GAC, an analytical approximate solution for flow and adsorption in packed beds can be obtained. The model seems to represent correctly the main features of industrial and home filters, however, more experimental data is necessary for scale‐up purposes. Copyright © 2011 Society of Chemical Industry     

Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets

In this work, we present thermoplastic nanocomposites of polycarbonate (PC) matrix with hybrid nanofillers system formed by a melt‐mixing approach. Various concentrations of multi‐walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GnP) were mixed in to PC and the melt was homogenized. The nanocomposites were compression molded and characterized by different techniques. Torque dependence on the nanofiller composition increased with the presence of carbon nanotubes. The synergy of carbon nanotubes and GnP showed exponential increase of thermal conductivity, which was compared to logarithmic increase for nanocomposite with no MWCNT. Decrease of Shore A hardness at elevated loads present for all investigated nanocomposites was correlated with the expected low homogeneity caused by a low shear during melt‐mixing. Mathematical model was used to calculate elastic modulus from Shore A tests results. Vicat softening temperature (VST) showed opposite pattern for hybrid nanocomposites and for PC‐MWCNT increasing in the latter case. Electrical conductivity boost was explained by the collective effect of high nanofiller loads and synergy of MWCNT and GnP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42536.     

An improved algorithm for the three‐fluid‐phase VLLE flash calculation

The VLLE flash is important in water and hydrocarbons mixtures, hydrocarbon and CO₂ rich mixtures, and hydrocarbon methane rich mixtures that are encountered in reservoir performance and recovery studies. A robust VLLE flash algorithm is proposed. The equilibrium and mass balance equations are solved as a constrained minimization problem. An inverse barrier function is used to handle the inequality constrains to solve for the phase fractions. It warrants always arriving to the solution. The challenging cases analyzed showed that the initialization procedure proposed, together with successive substitution iteration in the outer loop, is a good method for a stable VLLE flash algorithm, even near critical points. Whenever the result is in the region outside the three‐phase physical domain, the solution suggests that the system has fewer phases. In one of the cases analyzed, a region with three liquid phases was encountered and the algorithm found two different solutions with positive phase fractions. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3081–3093, 2015