Morphology modulation of gas‐foamed,micrometric, hollow polystyrene particles

In this article, we reports the effects of the processing conditions on the morphological and hollow attributes of polystyrene micrometric hollow particles produced by the use of a recently developed technique based on the gas foaming of spherical, dense particles. By modulating the foaming temperature and saturation pressure, we produced hollow particles with different attributes in terms of hollow dimensions, eccentricity, and open–close features. The results from these small systems were compared, and we found agreement with what is typically observed in bulk polymeric foaming, for example, an increase in the foaming efficiency with saturation pressure and the nonmonotonic effect of temperature. Furthermore, we observed an increase in the hollow number when using nucleating agents with respect to the neat polymer and when using nitrogen with respect to carbon dioxide as the blowing agent. The effects of particle manipulation before foaming to achieve hollow elongated or distorted particles are also reported. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44236.     

Mesophase features in isotactic poly(propylene‐co‐1‐heptene) copolymers

The influence of crystallization rate on the interesting polymorphism of random isotactic poly(propylene‐co‐1‐heptene) copolymers was studied, with particular attention to the conditions for obtaining the mesomorphic phase. Owing to the important decrease of cooling rate involved as the 1‐heptene content increases, the mesophase can be clearly observed by DSC for co‐unit contents above about 5 mol%. Furthermore, only the mesophase (or the amorphous phase) was found for the copolymer with 13.9 mol% 1‐heptene at common cooling rates of the calorimeter. Additionally, the copolymer with 21.4 mol% co‐units was found to be completely amorphous under any thermal treatment analyzed. Variable‐temperature diffraction experiments were carried out to ascertain unambiguously the nature of the phases involved. Finally, a remarkable transparency was attained (above 80% transmittance in the visible light region) at intermediate and high 1‐heptene contents, using easily accessible cooling rates. © 2016 Society of Chemical Industry     

High-speed cornering by CNC machines under prescribed bounds on axis accelerations and toolpath contour error

To exactly execute a sharp corner in the toolpath, the feedrate of a CNC machine must instantaneously drop to zero at that point. This constraint is problematic in the context of high-speed machining, since it incurs very high deceleration/acceleration rates near sharp corners, which increase the total machining time, and may incur significant path deviations (contour errors) at these points. A strategy for negotiating sharp corners in high-speed machining is proposed herein, based upon a priori toolpath/feedrate modifications in their vicinity. Each corner is smoothed by replacing a subset of the path that contains it with a conic “splice” segment, deviating from the exact corner by no more than a prescribed tolerance ?, along which the square of the feedrate is specified as a Bernstein-form polynomial. The problem of determining the fastest traversal of the conic segments under known axis acceleration bounds can then be formulated as a constrained optimization problem, and by exploiting some well-known properties of Bernstein-form polynomials this can be approximated by a simple linear programming task. Some computed examples are presented to illustrate the implementation and performance of the high-speed cornering strategy.     

Theoretical Modelling of Film-Forming Mechanisms Under Transient Conditions: Application to Deceleration and Experimental Validation

This paper proposes an analytical model for line (1D) and point contacts (2D), based upon the Ertel’s hypothesis to predict the evolution of film thickness in steady-state and transient conditions in elastohydrodynamic lubrication. This theoretical approach, applied to a velocity ramp at constant deceleration, is perfectly supported by experimental results in terms of film thickness distribution during the deceleration process and in terms of central film thickness at the vanishing of the entrainment velocity. This work emphasizes the role of the transport effects of the lubricant at the instantaneous entrainment velocity on the time and length scales at which the film thickness disturbances induced by the deceleration process occur until the complete halting of the surfaces.     

Implementing the Omega failure detector in the crash-recovery failure model

Unreliable failure detectors are mechanisms providing information about process failures, that allow to solve several problems in asynchronous systems, e.g., Consensus. A particular failure detector, Omega, provides an eventual leader election functionality. This paper addresses the implementation of Omega in the crash-recovery failure model. We first propose an algorithm assuming that processes are reachable from the correct process that crashes and recovers a minimum number of times. Then, we propose two algorithms which assume only that processes are reachable from some correct process. Besides this, one of the algorithms requires the membership to be known a priori, while the other two do not.     

Atmospheric DMSO degradation in the gas phase: Cl-DMSO reaction. Temperature dependence and products

The reactions of Cl atoms and ClO radicals with CH3-SOCH3 (DMSO) have been studied using the discharge flow method with direct detection of DMSO, CO, and products by mass spectrometry. The absolute rate constant at room temperature measured for reaction 1, (CH3)2SO + Cl --> products, was k(1) = (1.7 +/- 0.3) x 10(-11) cm3 molecule(-1) s(-1). For reaction 2, (CH3)2SO + ClO --> products, only an upper limit could be established, k(2) < or = 6 x 10(-14) cm3 molecule(-1) s(-1) Reaction 1 has been found to proceed through adduct formation and further decomposition involving the cleavage of the C-S bound. The pressure effect on the Cl-DMSO reaction from 0.5 to 3 Torr was negligible, and the temperature dependence in the range 273-335 K was also very slight. The results obtained are related to previous studies of sulfur compounds, and the atmospheric implications are also discussed in relation to the homogeneous sinks of DMSO. Tropospheric lifetimes of DMSO based on average Cl and ClO concentrations and the measured rate constants have been calculated showing that the contribution of reaction 1 must be of minor relevance in the marine boundary layer. Reaction 2 is so slow that it does not play any role within the atmospheric sulfur chemistry.     

Compared Analysis of Metro Networks Supported by Graph Theory

This paper brings into focus the topological and geographical evaluation of metro networks through the definition of a methodological approach based on a set of indicators, a lot of which are defined in the sector literature. Once the methodology was stated, the results of an application on the metro networks of 13 big metropolitan areas were illustrated. Statistical comparative analyses are proposed to classify networks.     

Chemical and microbiological quality of grass carp (Ctenopharyngodon idella) slaughtered by different methods

The effect of two slaughter methods (immersion in ice-water slurry and electrical stunning followed by ice slurry asphyxiation) on chemical and microbiological parameters of grass carp (Ctenopharyngodon idella) stored in ice for 20 days was evaluated. No differences in total volatile basic nitrogen (TVB-N), pH, carbohydrate or protein content of mucus were observed between the slaughter methods. Ice-slaughtered fish had lower bacteria counts at the beginning of storage, but higher counts than fish slaughtered by electricity at the end of storage (p < 0.05). However, no significant differences in the shelf life were observed between the slaughter methods evaluated (limit of acceptability – counts > 3 × 10⁶ CFU g⁻¹ – attained after 13–16 days). Results indicated that the chemical parameters evaluated have a limited applicability to assess the shelf life of grass carp stored in ice, since pH limit (6.8) was exceeded after 4 days, while TVB-N limit (30 mg%) was not attained after 20 days of storage.