Grain-Boundary Wetting-Dewetting in z= 1 SiAlON Ceramic

The grain-boundary structure of a model SiAlON polycrystal with nominal composition Si₅AlON₇ was characterized by transmission electron microscopy (TEM) both in an equilibrium (as-processed) state at room temperature and after quenching from elevated temperature. In addition, low-frequency (1–13 Hz) internal friction data were recorded as a function of temperature, showing a pronounced grain-boundary sliding peak positioned at 1030°C. High-resolution transmission electron microscopy (HRTEM) of the equilibrated low-temperature microstructure revealed residual glass only at multigrain junctions, but no amorphous intergranular films were observed. The detection of clean interfaces in the as-processed sample contradicts the internal friction data, which instead suggests the presence of a low-viscosity grain boundary phase, sliding at elevated temperatures. Therefore, a thin section of the as-sintered material was heated to 1380°C and rapidly quenched. HRTEM analysis of this sample showed, apart from residual glass pockets, wetted grain boundaries, which is in line with the internal friction experiment. This wetting-dewetting phenomenon observed in z = 1 SiAlON is expected to have a strong impact not only on high-temperature engineering ceramics but also on geological, temperature-activated processes such as volcanic eruptions.     

Occurrence patterns of alien freshwater turtles in a large urban pond ‘Archipelago’ (Rome,Italy): Suggesting hypotheses on root causes

The patterns of the occurrence and distribution of alien freshwater turtle species in an urban pond archipelago (Rome, Italy) were analysed, with the aim of exploring the role of a set of factors (type of ponds, landscape context, size area, distance from the nearest road) with a generalized linear model approach. A total of 311 ponds subdivided in three types (fountains, small basins, lakes) embedded in different landscape contexts (public parks, private parks, urban areas) at differing distances from the nearest road were sampled. Six non‐native freshwater turtle species in 31 sites were recorded (9.97%). Lakes exhibited the highest occurrence rates of alien freshwater turtles, compared to small basins and fountains. Freshwater turtle species in urbanized areas were only observed in parks (both public and private). In both the public and private parks, the lakes exhibited the highest percentage of occupied sites, with fountains being the lowest. A direct and significant relationship was observed between pond size and species richness. The distance from the nearest road did not appear to affect species richness. A first interpretation of the data from this study facilitated the postulation of two a posteriori hypotheses that should be tested, as follows: (i) the causal process of turtle release is random, and the rate of extinction (and recapture) is higher in smaller ponds, thus producing the observed pattern; and (ii) the turtle release is not random, and people actively select the ponds they consider more suitable for their pet animals. In this study, it appears the lakes were perceived by those who abandon their pets as the most ecologically suitable habitats among other pond types to accommodate the different species of turtles. Knowledge of people's attitudes in regard to releasing pet animals also might assist managers of public green spaces to develop strategies aimed to preserve local biodiversity, and to educate the public about the conservation issue represented by the alien species.     

2-Layer Right Angle Crossing Drawings

A 2-layer drawing represents a bipartite graph where each vertex is a point on one of two parallel lines, no two vertices on the same line are adjacent, and the edges are straight-line segments. In this paper we study 2-layer drawings where any two crossing edges meet at right angle. We characterize the graphs that admit this type of drawing, provide linear-time testing and embedding algorithms, and present a polynomial-time crossing minimization technique. Also, for a given graph G and a constant k, we prove that it is $\mathcal{NP}$ -complete to decide whether G contains a subgraph of at least k edges having a 2-layer drawing with right angle crossings.     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Fluoroelastomers-dependence of relaxation phenomena on composition

The dynamic-mechanical properties of some fluoroelastomers were determined as a function of composition at low frequency (≈ 1 Hz), by means of a free oscillation torsion pendulum, between −180°C and the softening point. Vinylidenefluoride (VDF)-hexafluoropropene (HFP) copolymers of molar composition 0–39% HFP and terpolymers of VDF and HFP with up to 30mol% tetrafluoroethylene (TFE) and a constant VDF to HFP molar ratio of 3.4 were considered. Two relaxation processes typical of the amorphous phase were found. The first, located at about −87°C, is related to local motions and the transition temperature was found to be independent of composition for copolymers, while it depends on TFE molar content for terpolymers. The second is related to the glass transition and the transition temperature depends on the composition. However, for semicrystalline copolymers the double glass transition phenomenon was observed. When crystallinity goes to zero at about 20 mol% HFP, only one transition is observed. It was also found that ordered structures can take place for terpolymers when TFE molar concentration exceeds 20%. The crystal disorder transition of pure PVDF (75°C) is observed also for low HFP concentrations but the transition temperature is strongly reduced. Analogies between the VDF-HFP and E-P systems are also discussed.     

Well defined CuI(NO), CuI(NO)2 and CuII(NO)X (X = O− and/or NO 2 − ) complexes in CuI-ZSMS prepared by interaction of H-ZSM5 with gaseous CuCl

In this note an exchange procedure of the acidic protons of H-ZSM5 by Cu^I ions through reaction with CuCl in the gas phase is described. In the so obtained Cu^I-ZSM5 exchanged zeolite the Cu^I ions are in well defined configuration and form with NO mono and di-nitrosyl complexes of high structural and spectroscopic quality. The Cu^I(NO)₂ species are transformed at RT into Cu^II(NO)X (X=O^– and/or NO ₂ ^– ) species which could represent an intermediate in NO decomposition.     

Morphology, structure and properties of a poly(1-butene)/montmorillonite nanocomposite

A specifically formulated nanocomposite based on isotactic poly(1-butene) (PB) and montmorillonite was studied, by wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), transmission electron microscopy (TEM) and polarized light optical microscopy, investigating the polymorphism of the polymer, and examining the interaction between PB and the silicate. Montmorillonite was found to disrupt the ordered morphology of the polymer, determining a dramatic increase in the rate of the II→I phase transition. Interaction between polymer and clay was studied by TEM and SAXS also under a quantitative point of view. A significant enhancement of physical-mechanical properties was observed, even though exfoliation did not occur, but just a slight intercalation and a reduction in the size of tactoids.     

Epoxidized soybean oil modified using fatty acids as tougheners for thermosetting epoxy resins: Part 2—Effect of curing agent and epoxy molecular weight

A series of bio-rubber (BR) tougheners for thermosetting epoxy resins was prepared by grafting renewable fatty acids with different chain lengths onto epoxidized soybean oil at varying molar ratios. BR-toughened samples were prepared by blending BRs with diglycidyl ether of bisphenol A resins, Epon 828 and Epon 1001F, at different weight fractions and stoichiometrically cured using an amine curing agent, 4, 4′-methylene biscyclohexanamine (PACM). Fracture toughness properties of the unmodified and BR toughened polymer samples—including critical strain energy release rate (G_Ic), and critical stress intensity factor (K_Ic)—were measured to investigate the toughening effect of prepared BRs. It was found that the degree of phase separation and toughening were more controllable relative to similar polymers cured using the aromatic curing agent Epikure W, and the use of higher molecular epoxy resins produces a synergistic effect increasing the toughness much more than similar polymers made with lower molecular weight epoxy resins. Average BR domain sizes ranging from 200 to 900 nm were observed, and formulations with G_Ic, values K_Ic as high as 1.0 kJ/m² and 1.4 MPa m^1/2 were attained respectively for epoxy systems with T_g greater than 130°C.     

Epoxidized soybean oil modified using fatty acids as tougheners for thermosetting epoxy resins: Part 1

A series of bio-rubber (BR) reactive tougheners for thermosetting epoxy resins was prepared by grafting renewable saturated fatty acids of different chain lengths (C6-C14) onto epoxidized soybean oil (ESO) at varying molar ratios. The tunable nature of the BR systems derives from the architecture and functionality of naturally occurring molecules. Control of BR reactivity and molecular weight by varying the degree of grafting and the chain length of the fatty acid was demonstrated. The BR-toughened samples were prepared by blending BRs with diglycidyl ether of bisphenol A (DGEBA), Epon 828, and stoichiometrically curing the mixture using an aromatic amine hardener, diethyl toluene diamine (Epikure W). Fracture surface morphology studies showed that tuning of phase separated particle sizes was possible depending on the BR type and weight fraction. The resulting toughening effect was evaluated by measuring the fracture toughness of control and toughened polymer samples. The use of BRs significantly improved the critical strain energy release rate and critical stress intensity factor values of thermosetting polymer samples without significantly reducing T_g and modulus. In addition to toughening and adding renewable content to petroleum-based thermosetting epoxy systems these new tougheners have low viscosity compared to common alternatives and aid ease of processing.