Estimating the load line displacement of cracked laboratory specimens using the engineering treatment model (ETM)

The Engineering Treatment Model (ETM) provides a means for estimating the load line displacement of a cracked body. Under contained yielding conditions the model uses available linear elastic solutions with an Irwin-type plasticity correction of the crack length. The magnification factor (F/F_y)^1/n describing the material's strain hardening behaviour is applied for extrapolation into the regime of net section yielding. Comparison of ETM estimates with finite element and experimental results shows that the assumptions of the model are realistic.     

Untersuchung des einflusses molekularer parameter auf morphologie und eigenschaften von polyethylenen niedriger dichte

Based on the example of PE-LD grades and on model substances obtained by preparative fractionation (fractions in the molecular weight range M?_w = 1.2 ? 390·10⁴ g/mol), comprehensive investigations regarding the problems of structure/properties have been carried out. The correlations of M?_w with 15 physical and application technological perameters have been investigated taking into account the reaction mechanism during the manufacturing of PE-LD in the tubular and agitated autoclave reactor, resulting in the formation of so-called primary structure perameters M?_n, M?_w, molar mass distribution, short chain branching and long chain branching. For the interpretation of the results, among other factors, also the morphological conditions have been taken into consideration, which in connection with the molecular parameters reveal — for specific M?_w-ranges — strong changes and saturation ranges, resp., for the physical and application technological properties.     

Synthese von substituierten benzotriazolen zur stabilisierung aromatischer polyamide gegen UV-licht

2-(2′-Hydroxyphenyl)-benzotriazoles, containing a carbonamide group in 5- or 5′-position, were synthesized to stabilize polyamides. The influence of the ortho-positioned hydroxy group for the stabilizing effect of these substances was examined by methylating it. The synthesized benzotriazoles were characterized, especially with regard to their UV-absorption-spectra. The photolytic resistance of poly-(m-phenyleneisophthalamide), containing these stabilizers, for example 2-(2′-hydroxy-5′-tert-butylphenyl)-benzotriazol-5-carbonic acid anilide, was examined by measuring the viscosity.     

The oxidation and self-heating of metal sulphides as an electrochemical corrosion phenomenon

Experiments with a representative number of technically interesting metal sulphides trace out hydrogen peroxide as the reactive intermediate of sulphide oxidation. It is formed through an electrochemical reduction of molecular oxygen. The formation of sulphur or sulphate as the final state of oxidation is determined by consecutive reactions which are critically dependent on the catalytical properties of the surface and the solution for hydrogen peroxide decomposition. The individual steps of the reaction are discussed in some detail. Conclusions with respect to a possible control of the autogeneous heating are drawn.     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.