Application of powdered activated carbon for the adsorption of cylindrospermopsin and microcystin toxins from drinking water supplies

Cylindrospermopsin (CYN) and microcystin are two potent toxins that can be produced by cyanobacteria in drinking water supplies. This study investigated the application of powdered activated carbon (PAC) for the removal of these toxins under conditions that could be experienced in a water treatment plant. Two different PACs were evaluated for their ability to remove CYN and four microcystin variants from various drinking water supplies. The removal of natural organic material by the PACs was also determined by measuring the levels of dissolved organic carbon and UV absorbance (at 254 nm). The PACs effectively removed CYN and the microcystins from each of the waters studied, with one of the PACs shown to be more effective, possibly due to its smaller particle diameter. No difference in removal of the toxins was observed using PAC contact times of 30, 45 and 60 min. Furthermore, the effect of water quality on the removal of the toxins was minimal. The microcystin variants were adsorbed in the order: MCRR > MCYR > MCLR > MCLA. CYN was found to be adsorbed similarly to MCRR.     

Sperm Methylome Profiling Can Discern Fertility Levels in the Porcine Biomedical Model

A combined Genotyping By Sequencing (GBS) and methylated DNA immunoprecipitation (MeDIP) protocol was used to identify—in parallel—genetic variation (Genomic-Wide Association Studies (GWAS) and epigenetic differences of Differentially Methylated Regions (DMR) in the genome of spermatozoa from the porcine animal model. Breeding boars with good semen quality (n = 11) and specific and well-documented differences in fertility (farrowing rate, FR) and prolificacy (litter size, LS) (n = 7) in artificial insemination programs, using combined FR and LS, were categorized as High Fertile (HF, n = 4) or Low Fertile (LF, n = 3), and boars with Unknown Fertility (UF, n = 4) were tested for eventual epigenetical similarity with those fertility-proven. We identified 165,944 Single Nucleotide Polymorphisms (SNPs) that explained 14–15% of variance among selection lines. Between HF and LF individuals (n = 7, 4 HF and 3 LF), we identified 169 SNPs with p ≤ 0.00015, which explained 58% of the variance. For the epigenetic analyses, we considered fertility and period of ejaculate collection (late-summer and mid-autumn). Approximately three times more DMRs were observed in HF than in LF boars across these periods. Interestingly, UF boars were clearly clustered with one of the other HF or LF groups. The highest differences in DMRs between HF and LF experimental groups across the pig genome were located in the chr 3, 9, 13, and 16, with most DMRs being hypermethylated in LF boars. In both HF and LF boars, DMRs were mostly hypermethylated in late-summer compared to mid-autumn. Three overlaps were detected between SNPs (p ≤ 0.0005, n = 1318) and CpG sites within DMRs. In conclusion, fertility levels in breeding males including FR and LS can be discerned using methylome analyses. The findings in this biomedical animal model ought to be applied besides sire selection for andrological diagnosis of idiopathic sub/infertility.     

Effective Separation of CO2 Using Metal-Incorporated rGO Membranes

Graphene-based materials, primarily graphene oxide (GO), have shown excellent separation and purification characteristics. Precise molecular sieving is potentially possible using graphene oxide-based membranes, if the porosity can be matched with the kinetic diameters of the gas molecules, which is possible via the tuning of graphene oxide interlayer spacing to take advantage of gas species interactions with graphene oxide channels. Here, highly effective separation of gases from their mixtures by using uniquely tailored porosity in mildly reduced graphene oxide (rGO) based membranes is reported. The gas permeation experiments, adsorption measurement, and density functional theory calculations show that this membrane preparation method allows tuning the selectivity for targeted molecules via the intercalation of specific transition metal ions. In particular, rGO membranes intercalated with Fe ions that offer ordered porosity, show excellent reproducible N₂/CO₂ selectivity of ≈97 at 110 mbar, which is an unprecedented value for graphene-based membranes. By exploring the impact of Fe intercalated rGO membranes, it is revealed that the increasing transmembrane pressure leads to a transition of N₂ diffusion mode from Maxwell–Stefan type to Knudsen type. This study will lead to new avenues for the applications of graphene for efficiently separating CO₂ from N₂ and other gases.     

Core–sheath nanofibrous membranes based on poly(acrylonitrile-butadiene-styrene), polyacrylonitrile,and zinc oxide nanoparticles for photoreduction of Cr(VI) ions in aqueous solutions

This investigation addresses the design of a series of poly(acrylonitrile-butadiene-styrene)/polyacrylonitrile–zinc oxide(ABS/PAN–ZnO) membranes by coaxial electrospinning. In the first instance, an optimization of ABS and PAN electrospinning was performed, thus establishing suitable compositional and processing parameters for obtaining homogenous fibers. Then, coaxial electrospinning of ABS and PAN solutions containing different amount of ZnO nanoparticles was carried out. The coaxial morphology of the nanofibers and ZnO distribution/dispersion were studied by the combination of several techniques such as scanning electron microscopy, X-ray energy dispersive analysis, contact angle, and thermogravimetric analysis. The performance of the obtained membranes for chromium (VI) ions removal from aqueous solutions was assessed by photoreduction using ultraviolet–visible spectroscopy. Electrospun mats composed of ABS (core)/PAN (sheath) embedded with 30 wt % of ZnO nanoparticles exhibited the highest chromium photoreduction (about 80%), suggesting the potential use of these membranes as filters for water purification. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48429.     

Optimal design of renewable energy systems with flexible inputs and outputs using the P‐graph framework

The P‐graph framework introduced by Friedler et al. (Chem Eng Sci. 1992;47:1973–1988) is a general mathematical methodology based on Graph Theory which is applicable to many process design problems. We propose an extension of the P‐graph framework and the associated MILP model to account for operating units and systems where the inputs and outputs are variable. This is important because the P‐graph framework in its current form would otherwise apply only to systems where the ratios of inputs to outputs are fixed. Consequently, it is difficult to apply the method to many emerging systems without the new mathematical model presented here. We discuss and develop the model in detail, and we then illustrate its application with the case study of an energy system. We establish a structure with optimal cost for a baseline heat demand, and we further explore how the energy system structure and the feedstocks change as the heat demand increases. © 2015 American Institute of Chemical Engineers AIChE J, 62: 1143–1153, 2016     

Synthesis, characterization and olefin polymerization studies of iron(II) and cobalt(II) catalysts bearing 2,6-bis(pyrazol-1-yl)pyridines and 2,6-bis(pyrazol-1-ylmethyl)pyridines ligands

The complexes Py(PzR₃)₂MCl₂ (R = H, Me; M = Fe, Co) and Py(CH₂PzR₃)₂MCl₂ (R = H, Me; M = Fe, Co) have been synthesized, characterized and used in the ethylene polymerization. Treatment of these iron and cobalt complexes with methylaluminoxane (MAO) as cocatalyst leads to active ethylene polymerization catalysts that produced linear polyethylene. In general, iron catalysts were more active than cobalt analogs. The steric and electronic effects of the ligands were study over the catalytic activity toward ethylene polymerization. Complexes with small substituents groups (R = H) on the pyrazolyl ring, increase the catalytic activity in comparison to complexes with bigger substituents groups (R = CH₃). Additionally, complexes with methylene groups placed between pyridine and pyrazole rings of ligands have less catalytic activity than complexes without the methylene group (CH₂). The presence of methyl groups (R = CH₃) in iron and cobalt complexes allow to obtain polyethylene with molecular weights higher than the one obtained with complexes without these methyl groups. Additionally, complexes with methylene groups present between pyridine and pyrazole rings generate polyethylenes with molecular weight higher than the ones produced with complexes without these methylene groups.     

Degradability of extruded polyethylene/chitosan blends compatibilized with polyethylene‐graft‐maleic anhydride under natural weathering

The impact of chitosan on the natural weathering behavior of two blends obtained by mixing either polyethylene (PE) with chitosan or PE, chitosan and polyethylene‐graft‐maleic anhydride (PEgMA) as a compatibilizer is analyzed. In order to follow the weathering behavior of both the uncompatibilized and compatibilized systems, the blend films are exposed to outdoor conditions for 6 months. The weathering behavior of the films is monitored by mechanical tests, spectroscopic Fourier transform infrared, and morphological analyses at different weathering periods of time. The presence of chitosan in the blends accelerates significantly the degradation of the films. Apparently, PEgMA also accelerates the photo‐oxidation rate of the films. This behavior appears to be related to the photo‐oxidative instability of maleic anhydride, and also to the better dispersion of chitosan in the PE matrix, which is due to the interactions in the PE/chitosan interface caused by the addition of the compatibilizer. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41045.     

Development of energy-saving spinning membrane systemand negatively charged ultrafiltration membranes for recovering oil from waste machine cutting fluid

Membranes with hydrophobic surfaces have higher tendency for protein adsorption and bacteria attachment.As a result, these membranes foul rapidly in cross-flow filtration processes. Changing the membrane surface properties can slow down the membrane fouling process. For difficult membrane separation processes like oilwater emulsion separation, changing membrane properties alone cannot slow down the membrane fouling process. The ordinary cross-flow filtration system cannot be successfully employed for this kind of separation, and the spinning membrane disc system could be considered. The conventional spinning membrane disc system however is not energy efficient due to the centrifugal force acting against the permeate flow; this reduces the effective filtration pressure during the separation operation. Efforts were undertaken to develop a group of negatively charged ultrafiltration membranes, prepared from polyacrylonitrile-vinyl acetate-sodium p-sulfophenyl methallyl ether (CP-24) with polyacrylonitrile-vinyl acetate (CP-16), to be used in an energy-saving design of spinning membrane disc separation system. Our experimental results clearly demonstrate the energy saving benefit of our design; at filtration pressure of 276 kPa and at membrane disc spinning velocity of 1,000 rpm without sacrificing the oil rejection (>98% for 1,000 ppm oil-in-water) by our membrane, the permeate velocity was increased as high as 132% by our energy-saving system over conventional spinning membrane disc separation system.     

Optimal control theory for sustainable environmental management

Sustainable ecosystem management aims to promote the structure and operation of the human components of the system while simultaneously ensuring the persistence of the structures and operation of the natural component. Given the complexity of this task owing to the diverse temporal and spatial scales and multidisciplinary interactions, a systems theory approach based on sound mathematical techniques is essential. Two important aspects of this approach are formulation of sustainability-based objectives and development of the management strategies. Fisher information can be used as the basis of a sustainability hypothesis to formulate relevant mathematical objectives for disparate systems, and optimal control theory provides the means to derive time-dependent management strategies. Partial correlation coefficient analysis is an efficient technique to identify the appropriate control variables for policy development. This paper represents a proof of concept for this approach using a model system that includes an ecosystem, humans, a very rudimentary industrial process, and a very simple agricultural system. Formulation and solution of the control problems help in identifying the effective management options which offer guidelines for policies in real systems. The results also emphasize that management using multiple parameters of different nature can be distinctly effective.