（Nb_yTi_（1－y））C_x单晶体制备及其结构研究

用熔剂法制备了（Ｎｂ＿ｙ．Ｔｉ＿（１－ｙ））Ｃ＿ｒ单晶体，用Ｄｅｂｙｅ照相法及四圆衍射仪对其晶体结构进行了研究。实验结果表明，（Ｎｂ＿ｙＴｉ￣（１－ｙ）Ｃ＿ｘ中存在类似于作化学计量化合物ＴｉＣ＿ｘ及ＮｂＣ＿ｘ的有序一无序转变现象，转变温度随其化学成份改变在１１７５～１２８０Ｋ范围内变化。高温型（Ｎｂ＿ｙＴｉ￣（１－ｙ））Ｃ＿ｘ的晶体结构属ＮａＣｌ型结构，碳空位呈随机分布；低温型（Ｎｂ＿ｙＴｉ￣（１－ｙ））Ｃ＿ｘ的晶体中碳空位呈短程有序分布，可用Ｖ＿６Ｃ＿５晶体结构模型进行描述。     

Simulation of Nonstationary Spring Discharge Using Time Series Models

We present a detailed analysis and comparison of two time series models, i.e., ARIMA and ARIMA-GARCH, to simulate the discharge of a karst spring (Niangziguan Springs (NS) complex) in the northern China. Statistical tests for the residuals are applied to examine the reasonability of the models. Statistically, both models are reasonably good to simulate the mean value of the discharge of the NS complex. The statistical test shows that the residual discharge data have conditional time-varying variance and volatility clustering, known as heteroscedasticity of the data. Calibration test shows that the ARIMA-GARCH model gives a varying confidence interval, which can more effectively capture the heteroscedasticity of the data, comparing with a constant confidence interval in the ARIMA model. In the validation and application process, we applied two approaches to simulate the discharge data: (1) fixed models, and (2) evolving models. The confidence interval width monotonically increases in both fixed models, and the fixed ARIMA-GARCH model has faster increasing confidence interval width than the fixed ARIMA model. This suggests that the fixed time series models are only suitable for short-term prediction. However, we found that this drawback can be compensated by updating the model once new data become available. Our evolving models show more reasonable confidence interval width for both models. In addition, the application shows that the ARIMA-GARCH model is very sensitive to the data fluctuation. We also found the evolving ARIMA-GARCH model was able to return to the narrow confidence interval width once the fluctuation diminished. Hence, we conclude that the ARIMA-GARCH model is more suitable for the sequences with strong heteroscedasticity.     

DQ型高效催化剂在环管PP装置上的应用

介绍了使用DQ型球形高效催化剂在上海石油化工股份有限公司塑料事业部70kt/a环管连续法工业聚丙烯生产装置上应用研究的结果，并对结果进行了讨论。     

苯酚催化氧化制备对苯二酚的研究

介绍了以苯酚为原料，采用催化氧化法合成对苯二酚的方法，讨论了各种因素对反应的影响，并得到了反应的优惠条件。本反应条件温和，三废少，对苯醌收率可达８０．４％。     

景德镇陶瓷物流的构建研究

物流服务作为对地区生产力提高和社会经济增长有重要意义的四个服务性行业之一，在全国范围内已经被广泛地得到认可。本文分析了景德镇经济发展、陶瓷物流业发展和景德镇物流需求的状况，结合实际提出了景德镇现代物流业发展建议。     

聚乙烯可降解薄膜研究进展

聚乙烯(PE)是目前应用生产薄膜最大的塑料品种之一,为了避免"白色污染",利用淀粉和无机填料改性聚乙烯制得可降解薄膜是目前最主要的两种手段。本文探讨了淀粉改性聚乙烯的工艺、机理和改性后薄膜的性能;同时讨论了不同无机填料改性聚乙烯的工艺、机理。     

钙钛矿型中温固体电解质La0.9Sr0.1Ga0.8Mg0.2O3-δ的制备

以硝酸盐为前驱体合成了具有钙钛矿结构的中温固体电解质La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)。用XRD和SEM分析了样品钙钛矿相的形成过程和显微结构,用直流四电极法测试了电解质的氧离子电导率。研究结果表明:经1 450℃煅烧6 h后得到LSGM单相结构,800℃时的电导率为6.8×10-2S.cm-1,高于同温下钇稳定氧化锆(YSZ)样品的电导率,表明LSGM更适合做中温固体氧化物燃料电池(SOFC)的电解质材料。     

由骨胶水解液中分离提取L-羟脯氨酸和L-脯氨酸的实验研究

本文报道了由骨胶水解液中分离提取 L -羟脯氨酸和 L-脯氨酸的工艺。产品产率为 L-Hy P5.2 8% ;L-Pro3 .6 %。工业化产品经按日本有关标准检测全部合格。该工艺已通过内蒙古自治区经委的验收     

6,7-二氨基-2-(2′,4′-二甲基)苯基-1H-苯并[de]异喹啉-1,3(2H)-二酮的合成

苊经发烟硝酸硝化，稀硝酸氧化得到６，７－二硝基－１Ｈ，３Ｈ－萘并［１，８－ｃｄ］吡喃－１，３－二酮，它与２，４－二甲基苯胺缩合后用氯化亚锡还原得到６，７－二氨基－２－（２′，４′－二甲基）苯基－１Ｈ－苯并［ｄｅ］异喹啉－１，３（２Ｈ）－二酮。与６－氨基－２－（２′，４′－二甲基）苯基－１Ｈ－苯并［ｄｅ］异喹啉－１，３（２Ｈ）－二酮（Ｃ．Ｉ．溶剂黄４４，或Ｃ．Ｉ．分散黄１１）相比，其在ＤＭＦ中的最大吸收波长红移了１７．６ｎｍ，最大荧光波长蓝移了４２．７ｎｍ，荧光量子产率有所增大。     

密闭条件下使用的氟硅密封剂的制备

讨论了硫化体系，硫化剂用量，填料种类对在密闭条件下使用的氟硅密封剂耐热性能的影响，结果表明，采用硅氮烷低聚物作硫化剂，TiO2为补强填料，硅氟密封，剂在密闭环境中180℃高温下降解不明显，硫化后的密封剂仍保持一定的硬度和良好的弹性。