Importance of airborne contamination during dressing of beef and lamb carcasses

Carcasses along slaughter lines were exposed to normal slaughterhouse air or ultraclean air provided from a unit fitted with a HEPA filter. In cattle slaughterhouses, aerobic viable counts were measured by sponging the brisket at the end of the line to determine whether the slaughterhouse air had led to contamination of the carcasses. Furthermore, a replica cattle carcass with settle plates attached was exposed to similar conditions. The greatest contamination of the plates occurred at the hide puller (P < 0.01). The use of ultraclean air reduced the deposition of organisms onto settle plates (P < 0.01). The airborne route contributed to contamination in cattle slaughterhouses, but other vectors were more important. Further study of contamination of the brisket, at the time that it was first exposed, showed that knives transfer contamination from the hide. The use of ultraclean air at this position showed that the airborne route was a contributor to contamination (P < 0.1), but it was not the greatest vector. In lamb slaughterhouses, the highest counts on settle plates were found at the fleece puller (P < 0.05). The highest counts on the lamb carcasses were found on the brisket exposed from the start of the line to just after the fleece puller (P < 0.05). There was no clear relationship between the measured counts and the concentration of organisms in the air, indicating that the airborne route in lamb slaughterhouses contributes less to carcass contamination than do the surface contacts.     

An assessment of sampling methods and microbiological hygiene indicators for process verification in poultry slaughterhouses

Studies to determine the appropriateness of the use of populations of indicator bacteria on poultry carcasses for process verification were undertaken in commercial slaughterhouses. Samples were collected from neck skin by excision or from whole carcass rinses and were examined for a range of presumptive process hygiene indicator bacteria. Coefficients of variation were calculated for each bacterial indicator and were significantly lower in excised samples, indicating more reproducible bacterial recovery by this sampling method. Total viable counts of aerobic bacteria, Enterobacteriaceae, and Pseudomonas in samples collected by excision had the lowest coefficients of variation when compared with other indicators and were therefore used for further study. The uncertainties associated with the quantification of each bacterial indicator were calculated and were lowest overall for total viable counts of aerobic bacteria. In general, uncertainty was higher for lower bacterial numbers. Results of microbiological testing on pooled excised neck skin samples were not significantly different from the mean of individually analyzed samples. Bacterial numbers increased by 1 log unit when cultures were stored under chilled conditions typical of those used for transporting samples to external laboratories, but the increases were not significant for Pseudomonas and aerobic bacteria when storage time was less than 17 h. Weak relationships were identified between bacterial indicator numbers and duration of processing, although cleanliness of the processing environment diminished visibly during this time. In the plants visited for this study, there was a poor relationship between presumptive bacterial indicator numbers and process hygiene. Consequently, bacterial analyses for process verification purposes may be of limited value.     

Measurement of Campylobacter numbers on carcasses in British poultry slaughterhouses

An assessment of the proposed new International Organization for Standardization quantitative method for Campylobacter was undertaken on poultry carcass samples collected after the chilling phase of processing. Using a critical differences method, we determined the uncertainty associated with log-transformed Campylobacter numbers by dual analyses of 346 samples collected from 22 processing plants located throughout the United Kingdom. Overall, using log-transformed Campylobacter numbers that ranged between -1 and 5 log, we calculated the expanded measurement of uncertainty (EMU) to be 3.889 for the new method. The EMU changed when ranges of bacterial numbers were grouped for analyses. For low numbers of Campylobacter (< 1 log), the EMU was calculated to be 5.622. There was less measurement error with higher bacterial numbers because the EMU was found to be 0.612 for samples containing Campylobacter numbers of 3 log or above. The draft method was used to measure numbers of Campylobacters on poultry carcasses collected from 18 United Kingdom processing plants in summer and winter. Numbers were significantly lower in winter. We conclude that, although the new method is adequate at quantifying high numbers of Campylobacter on poultry carcasses, further development is required to improve the measurement of small numbers of this causative agent of foodborne illness.     

Challenges and progress in predicting biological responses to incorporated radioactivity

Prediction of risks and therapeutic outcome in nuclear medicine largely rely on calculation of the absorbed dose. Absorbed dose specification is complex due to the wide variety of radiations emitted, non-uniform activity distribution, biokinetics, etc. Conventional organ absorbed dose estimates assumed that radioactivity is distributed uniformly throughout the organ. However, there have been dramatic improvements in dosimetry models that reflect the substructure of organs as well as tissue elements within them. These models rely on improved nuclear medicine imaging capabilities that facilitate determination of activity within voxels that represent tissue elements of approximately 0.2-1 cm(3). However, even these improved approaches assume that all cells within the tissue element receive the same dose. The tissue element may be comprised of a variety of cells having different radiosensitivities and different incorporated radioactivity. Furthermore, the extent to which non-uniform distributions of radioactivity within a small tissue element impact the absorbed dose distribution is strongly dependent on the number, type, and energy of the radiations emitted by the radionuclide. It is also necessary to know whether the dose to a given cell arises from radioactive decays within itself (self-dose) or decays in surrounding cells (cross-dose). Cellular response to self-dose can be considerably different than its response to cross-dose from the same radiopharmaceutical. Bystander effects can also play a role in the response. Evidence shows that even under conditions of 'uniform' distribution of radioactivity, a combination of organ dosimetry, voxel dosimetry and dosimetry at the cellular and multicellular levels can be required to predict response.     

Bystander responses in three-dimensional cultures containing radiolabelled and unlabelled human cells

Research on the radiation-induced bystander effect has been carried out mainly in 2-D tissue culture systems. This study uses a 3-D model, wherein apparently normal human diploid fibroblasts (AG1522) are grown in a carbon scaffold, to investigate the induction of a G(1) checkpoint in bystander cells present alongside radiolabelled cells. Cultures were simultaneously pulse-labelled with (3)H-deoxycytidine ((3)HdC) to selectively irradiate a minor fraction of cells, and bromodeoxyuridine (BrdU) to identify the radiolabelled cells. After thorough washing of cultures, iododeoxyuridine (IdU) was administered to detect proliferating bystander cells. The cultures were harvested at various times thereafter, and cells were reacted with two monoclonal antibodies specific to IdU/BrdU or BrdU, respectively, stained with propidium iodide, and subjected to multi-parameter flow cytometry. Cell-cycle progression was followed in radiolabelled cells (BrdU(+)) that were chronically irradiated by low energy beta particles emitted by DNA-incorporated (3)H, and in unlabelled bystander cells (BrdU(-)) by a flow cytometry based cumulative labelling index assay. As expected, radiolabelled cells were delayed, in a dose-dependent manner, in G(2) and subsequently G(1). No delay occurred in progression of bystander cells through G(1), when the labelled cells were irradiated at dose rates up to 0.32 Gy h(-1).     

Poly-Si thin-film transistors on steel substrates

We report the successful fabrication of poly-Si thin-film transistors (TFTs) on stainless steel substrates. The TFTs were fabricated on a 500 μm thick polished stainless steel substrate using furnace crystallized amorphous Si deposited by PECVD. These devices typically have threshold voltages of 8.6 V, linear effective mobilities of 6.2 cm²/V·s and subthreshold slopes of 0.93 decade/V. This work demonstrates the feasibility of poly-Si TFTs on stainless steel substrates and identifies some critical issues involved in poly Si processing on stainless steel. This will enable the fabrication of arrays with integrated drivers on a cheap, flexible and durable substrate for various displays and other large area array microelectronic applications     

High-performance liquid chromatography and spectroscopic studies on fish oil oxidation products extracted from frozen atlantic mackerel

The formation of stable hydroxy derivatives from hydroperoxides produced during the oxidation of linoleic acid methyl ester and fish oil were studied by reverse-phase high-performance liquid chromatography (HPLC), gas chromatography-mass spectrometry (GC-MS) and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The oxidation products identified were mixtures of four isomeric hydroxy derivatives: 13-hydroxy-9-cis,11-trans-octadecadienoic, 13-hydroxy-9-trans,11-trans-octadecadienoic, 9-hydroxy-10-trans,12-cis-octadecadienoic, and 9-hydroxy-10-trans,12-trans-octadecadienoic acids. The presence of hydroxy compounds was confirmed by ¹³C NMR, which gave rise to a hydroxy carbon peak at 87 ppm, and by GC-MS, which showed three peaks corresponding to isomeric mixtures of trimethylsilyl ethers of the oxidized linoleic acid methyl ester. The mass spectra scans of the three peaks showed that they represent isomers of molecular weight 382 and are consistent with the molecular formula C₂₂H₄₂O₃Si. In oil extracted from stored frozen mackerel, 13-hydroxy-9-cis,11-trans-octadecadienoic acid was more prominent compared to the model lipid systems. HPLC offered a sensitive means of detection of hydroxy compounds produced both in the initiation and latter stages of oxidation. The effect of antioxidants added to the fish mince prior to storage can also be monitored by HPLC. Thus, the monitoring of lipid oxidation hydroxy derivatives by HPLC is of practical value in the efficient processing and quality control of fish, fish oils, and other fatty foodstuffs in order to enhance the acceptability, nutritional, and safety aspects.     

Parade Game: Impact of Work Flow Variability on Trade Performance

The Parade Game illustrates the impact work flow variability has on the performance of construction trades and their successors. The game consists of simulating a construction process in which resources produced by one trade are prerequisite to work performed by the next trade. Production-level detail, describing resources being passed from one trade to the next, illustrates that throughput will be reduced, project completion delayed, and waste increased by variations in flow. The game shows that it is possible to reduce waste and shorten project duration by reducing the variability in work flow between trades. Basic production management concepts are thus applied to construction management. They highlight two shortcomings of using the critical-path method for field-level planning: The critical-path method makes modeling the dependence of ongoing activities between trades or with operations unwieldy and it does not explicitly represent variability. The Parade Game can be played in a classroom setting either by hand or using a computer. Computer simulation enables students to experiment with numerous alternatives to sharpen their intuition regarding variability, process throughput, buffers, productivity, and crew sizing. Managers interested in schedule compression will benefit from understanding work flow variability's impact on succeeding trade performance.