Nonuniformity of phase structure in immiscible polymer blends

This article is focused on the phase structure development in immiscible polymer blends during melt mixing. Nonuniformity of the phase structure, i.e., the coexistence of areas containing particles with markedly different size distribution, was detected in quenched and compression molded samples of a number of various blends prepared by long and intensive mixing in the chamber of a Plasticorder. The same effect was found also for polystyrene/polyamide blends prepared in a twin‐screw extruder. It was shown that neglecting nonuniformity of the phase structure can lead to considerable error in evaluation of the effect of system parameters on the blend morphology. The reasons for the effect were discussed and it was found that inhomogeneous flow field in mixers is a plausible explanation of the nonuniform phase structure. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

A Surprise Party (on Your Computer)?

Iv?n Arce of Core Security Technologies looks at the current state of malware and introduces the articles he selected for this special issue.     

Experimental and calculated liquid-liquid interfacial tension in demixing metal alloys

Liquid-liquid interracial tension in binary and temary Al-based monotectic systems has been determined experimentally with a tensiometric method in a wide temperature interval. The temperature dependence of the interfacial tension is well described by a power law function of the type σαβ - （1 - T/Tc）δ with the critical exponent δ= 1.3 and a critical temperature Tc. Theoretical models describing the liquid-liquid interface in monotectic alloys and their applicability for calculation of the interfacial tension and its temperature dependence in binary systems are considered.     

Tree-Based Concurrency Control in Distributed Groupware

We present a novel algorithm, called dARB, forsolving the concurrency control problem indistributed collaborative applications. Themain issue of concurrency control is resolvingthe conflicts resulting from simultaneousactions of multiple users. The algorithmreduces the need for manual conflict resolutionby using a distributed arbitration scheme. Themain advantages of our approach are thesimplicity of use and good responsiveness, asthere are no lock mechanisms. Our algorithmrequires the applications to use a tree as theinternal data structure. This makes itapplication independent and suitable forgeneral collaborative applications. The treerequirement is reasonable since many newapplications use XML (extensible MarkupLanguage) for data representation and exchange,and parsing XML documents results in treestructures. Example applications of thealgorithm, a group text editor and acollaborative 3D virtual environment calledcWorld, are implemented and evaluated in theDISCIPLE collaboration framework. We alsointroduce awareness widgets that users avoidgenerating the conflicting events and help inmanual conflict resolution.     

Information-Based Evaluation Criterion for Classifier's Performance

In the past few years many systems for learning decision rules from examples were developed. As different systems allow different types of answers when classifying new instances, it is difficult to appropriately evaluate the systems' classification power in comparison with other classification systems or in comparison with human experts. Classification accuracy is usually used as a measure of classification performance. This measure is, however, known to have several defects. A fair evaluation criterion should exclude the influence of the class probabilities which may enable a completely uninformed classifier to trivially achieve high classification accuracy. In this paper a method for evaluating the information score of a classifier's answers is proposed. It excludes the influence of prior probabilities, deals with various types of imperfect or probabilistic answers and can be used also for comparing the performance in different domains.     

Pyrolysis-field ionization mass spectrometry of modified bagasse fractions

The fractions obtained from bagasse after activation with 17.5% NaOH, alternative alkylation with quarternary ammonium groups and extraction with 80% ethanol, water and 5% NaOH, were analyzed using pyrolysis-field ionization mass spectrometry (Py-FIMS). The proposed degradation products from lignin were mostly symmetric fragments containing two aromatic rings while the compounds formed from polysaccharides were the result of dehydration reactions. From the temperature-resolved Py-FIMS it could be seen that ethanol-lignin starts to degrade at temperatures lower than 180°C before the degradation of the hemicellulose fraction. The lignin markers are eliminated from hemicellulose fractions before the polysaccharide gasification starts. The quarternary ammonium groups are cleaved from the fractions at temperatures lower than 200°C.     

A review of the metallurgy of heat treatment of welded joints

This paper deals with the metallurgical changes which occur during heat treatment of welded joints. Stress relieving heat treatment in the temperature range below A₁, the normalizing heat treatment and the heat treatment in the intercritical range A₁–A₃, are all considered. The thermal regime of welding is described. The practice of intercover of the weldment before applying PWHT to ambient temperature is described. It is stressed that the aim of stress-relieving heat treatment is not only to relax internal stresses but also to improve the microstructure and impact properties of HAZ and weld metal, to improve dimensional stability and increase resistance against stress corrosion. Examples are given of the effect of annealing in the intercritical range A₁–A₃ on the improvement in toughness of electroslag welded joints. Changes in dislocation distribution and density, precipitation processes and grain sizes during PWHT are described.     

Geometric criteria of hydrogen bonds in proteins and identification of `bifurcated' hydrogen bonds

Empirical criteria for identification of hydrogen bonds wereanalyzed to produce a set of geometrically consistent criteria.For a data set of 30 structures, application of a set of purelygeometrical criteria, along with exclusion of abnormal backboneconformations, also excluded a common interaction of Ser/Thrside chains with Asp/Glu side chains ([ST]/[DE] pairs). Theseinteractions were termed `bifurcated hydrogen bonds/', whichimplies delocalization of a positively charged hydrogen of hydroxylbetween the two acceptor atoms of the carboxylic group. These`bifurcated/' interactions are among the most common packingpatterns for [ST]/[DE] pairs of side chains. Therefore, theidentification of hydrogen bonds cannot be based on geometricalcriteria only and requires introduction of some physico-chemicalcriteria.     

Node and element resequencing using the Laplacian of a finite element graph: Part I—General concepts and algorithm

A Finite Element Graph (FEG) is defined here as a nodal graph (G), a dual graph (G*), or a communication graph (G˙) associated with a generic finite element mesh. The Laplacian matrix ( L (G), L (G*) or L (G˙)), used for the study of spectral properties of an FEG, is constructed from usual vertex and edge connectivities of a graph. An automatic algorithm, based on spectral properties of an FEG (G, G* or G˙), is proposed to reorder the nodes and/or elements of the associated finite element mesh. The new algorithm is called Spectral PEG Resequencing (SFR). This algorithm uses global information in the graph, it does not depend on a pseudoperipheral vertex in the resequencing process, and it does not use any kind of level structure of the graph. Moreover, the SFR algorithm is of special advantage in computing environments with vector and parallel processing capabilities. Nodes or elements in the mesh can be reordered depending on the use of an adequate graph representation associated with the mesh. If G is used, then the nodes in the mesh are properly reordered for achieving profile and wavefront reduction of the finite element stiffness matrix. If either G* or G˙ is used, then the elements in the mesh are suitably reordered for a finite element frontai solver, A unified approach involving FEGs and finite element concepts is presented. Conclusions are inferred and possible extensions of this research are pointed out. In Part II of this work,¹ the computational implementation of the SFR algorithm is described and several numerical examples are presented. The examples emphasize important theoretical, numerical and practical aspects of the new resequencing method.