Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

Theoretical investigation on the steady-state natural circulation characteristics of a new type of pressurized water reactor

1 Introduction With respect to the inherent safety of nuclear re- actors, application of passive systems/components including natural circulation phenomena as the main mechanism is intended to simplify the safety-related systems and to improve their reliability, to reduce the effect of human errors and equipment failures, and to provide more time to enable the operators to prevent or mitigate serious accidents. Natural circulation is the main mode of heat removal for removing decay heat from t…     

A cell-based robust optimal coordinated control on urban arterial road

Process of optimizing coordinated control is divided into two stages.At the first stage,the study improves a robust optimal control model of single-point intersection to optimize cycle and split.At the second stage,the study combines all links with intersections of arterial road as a complete system,and applies cell transmission model to simulate traffic flow on urban signalized arterial road.We propose a coordinated control model based on the platform to optimize offset between adjacent intersections.Genetic algorithm is executed by MATLAB to solve the model.The performance evaluations show that the model not only effectively reduces average delay and stopping rate of vehicles on arterial road and largely enhances traffic capacity of arterial road,but also lowers the sensitivity of signal control for flow fluctuations.     

服装实验课程“双主”教学模式研究

文章深入分析服装实验教学现状及存在的问题,提出在服装实验课程中实行"双主"教学模式,从教学内容、方法与手段等方面进行改革,并就教学成效进行对比。"双主"教学模式在服装实验课程中的应用,在发挥教师主导作用的同时,有利于充分发挥学生的主体作用,调动课堂积极性,教学效果显著。     

基于人工免疫机制的木马检测系统

将生物体免疫系统的原理、规则和机制运用到计算机木马检测系统中。利用人工免疫系统的分布性、自适应性、记忆性和高效性,降低检测系统的误报率和提高自适应性问题。     

基于图像处理的金相分析系统研究

在图像研究的基础上,以数学形态学算法为关键步骤,研究开发金相图像分析系统,从噪声较为复杂的金相图像中有效地分割出目标图像,较好地处理晶粒粘连以及重叠问题,从而得到较高准确度的晶粒度。实践结果表明,本系统具有一定的准确度,界面友好,易于操作。     

A novel STAP method for the detection of fast air moving targets from high speed platform

Space-time adaptive processing (STAP) is an effective method for detecting moving target in airborne/spaceborne radar.However,the detection of fast air moving targets from high speed platform is challenged by the range walk of both the clutter and moving targets.It is well known that keystone formatting can be used to compensate for the range walk of multiple moving targets simultaneously without using the knowledge of the motion parameters.However,in the presence of serious Doppler ambiguity of fast air moving targets,distribution of the clutter will be affected by the keystone formatting matched to the ambiguity number of targets,and as a result the STAP performance will degrade.In this paper,a novel STAP method is proposed for the detection of fast air moving targets from high speed platform,which can deal with the range walk of both clutter and targets.Effectiveness of the new method is verified via simulation examples.     

基于物联网的水质在线监测系统设计

针对传统水质监测方案布线困难、成本高等不足,设计了一种基于物联网的水质在线监测系统,实现了对溶解氧、PH值、温度等多参数的采集、传输、处理。该方案便于远程监测,适用于饮用水及养殖业水质监测等领域。     

基于IPv6组播的M-FHM IPv6切换技术

由于快速分层切换技术FHMIPv6将FMIPv6和HMIPv6切换技术结合起来,因此,在层次移动管理模型中部署快速切换时具有两种技术所具有的优点,可使切换延时进一步减少。文中通过对FHMIPv6的研究发现,其切换过程中DAD重复地址检测过程严重影响了切换性能,因此提出了基于IPv6组播的M-FHMIPv6切换技术。理论分析证明,M-FHMIPv6能有效减少DAD检测过程和各种信息交互的延迟。通过NS2实验仿真进一步说明:改进的M-FHMIPv6方案能减少切换延迟,平滑切换过程。