Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen-printed thick films for application in humidity sensing

Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy and transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy confirmed the formation of nanocrystalline zinc-ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30%-90% in the frequency range 42 Hz-1 MHz at room temperature (25°C) and 50°C. At 42 Hz at both analyzed temperatures the impedance reduced ~46 times in the humidity range 30%-90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.     

Polyamide 6 composite fibers with incorporated mixtures of melamine cyanurate,carbon nanotubes,and carbon black

Polyamide 6 (PA6) composite filament yarns were produced by the simultaneous incorporation of melamine cyanurate (MeCy) with multiwalled carbon nanotubes (CNTs) and carbon black (CB) into a composite matrix in a melt-spinning process. The results show that the simultaneous incorporation of MeCy with CNTs or CB additives provided filaments with a uniform black color. Tensile analysis confirmed that a reinforcing effect was achieved when CB was used, whereas the CNTs induced a reducing effect on the filament tenacity. With regard to the burning behavior, the flame-retardant action of MeCy was preserved in the presence of CB but was significantly hindered when used in combination with CNTs. These results indicate that the mixture of MeCy and CB was much more compatible for the production of reinforced PA6 composite filaments with increased thermal stability and improved flame retardancy over those of the MeCy and CNTs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47007.     

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO₂ (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO₂ and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (E_g) and, consequently, to investigate changes in the E_g value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO₂-based materials with antimicrobial properties that could be used in numerous green technology applications.     

Characterization of lactic acid bacteria isolated from Bukuljac, a homemade goat's milk cheese

The Bukuljac cheese is traditionally homemade cheese, produced from heat-treated goat's milk without the addition of any bacterial starter culture. The presence of lactic acid bacteria (LAB) in Bukuljac cheese has been analyzed by using a polyphasic approach including microbiological and molecular methods such as rep-PCR with (GTG)5 primer. Lactobacillus paracasei subsp. paracasei represents a dominant strain in the microflora of analyzed cheese. Out of 55 Gram-positive and catalase-negative isolates, 48 belonged to L. paracasei subsp. paracasei species. Besides lactobacilli, five Lactococcus lactis subsp. lactis and two Enterococcus faecalis were found. Results of PCR-denaturing gradient gel electrophoresis (DGGE) of DNA extracted directly from the fresh cheese revealed the presence of Leuconostoc mesenteroides. Only lactobacilli showed a high proteolytic activity and hydrolyzed alpha(s1)- and beta-caseins. They are also producers of diacetyl. In addition, 34 out of 55 isolates, all determined as lactobacilli, showed the ability of auto-aggregation. Among 55 isolates, 50 also exhibited antimicrobial activity.     

Holistic data-driven requirements elicitation in the big data era

Digital transformation stimulates continuous generation of large amounts of digital data, both in organizations and in society at large. As a consequence, there have been growing efforts in the Requirements Engineering community to consider digital data as sources for requirements acquisition, in addition to human stakeholders. The volume, velocity and variety of the data make requirements discovery increasingly dynamic, but also unstructured and complex, which current elicitation methods are unable to consider and manage in a systematic and efficient manner. We propose a framework, in the form of a conceptual metamodel and a method, for continuous and automated acquisition, analysis and aggregation of heterogeneous digital sources that aims to support data-driven requirements elicitation and management. The usability of the framework is partially validated by an in-depth case study from the business sector of video game development.

     

Strategies To Design Selective Histone Deacetylase Inhibitors

This review classifies drug-design strategies successfully implemented in the development of histone deacetylase (HDAC) inhibitors, which have many applications including cancer treatment. Our focus is on especially demanded selective HDAC inhibitors and their structure-activity relationships in relation to corresponding protein structures. The main part of the paper is divided into six subsections each narrating how optimization of one of six structural features can influence inhibitor selectivity. It starts with the impact of the zinc binding group on selectivity, continues with the optimization of the linker placed in the substrate binding tunnel as well as the adjustment of the cap group interacting with the surface of the protein, and ends with the addition of groups targeting class-specific sub-pockets: the side-pocket-, lower-pocket- and foot-pocket-targeting groups. The review is rounded off with a conclusion and an outlook on the future of HDAC inhibitor design.     

In-situ immobilization of Sr radioactive isotope using nanocrystalline hydroxyapatite

Hydroxyapatite was used as the inert matrix for in-situ immobilization of strontium (Sr) radioactive isotopes at room temperature. A nano-emulsification method was applied to synthesize Sr-substituted calcium hydroxyapatite (Ca_1?xSr_x)₁₀(PO₄)₆(OH)₂. The concentration of incorporated Sr was in the range of 0 ≤ x ≤ 1. Immobilization of Sr was evaluated using a stable isotope instead of radioactive isotope. The effect of strontium concentration on the crystal structure was studied and the results have showed that in the whole concentration range, Sr forms solid solutions with the host hydroxyapatite crystal structure. Powders comprised of nanometre sized particles were obtained and their properties, such as crystallite and particle size, changes in lattice parameters as function of dopant content and thermal stability, were further examined. It was found that the crystal structure of obtained powders is thermally stable at high temperatures. No secondary phases were formed in as-prepared powders or during calcination. The results in this study showed that nano-emulsion strategy provides a simple pathway for synthesis of a single-phase Sr-substituted hydroxyapatite, which can be used for immobilization of Sr radioactive isotopes.     

Lipids and Antiplatelet Therapy: Important Considerations and Future Perspectives

Lipids play an essential role in platelet functions. It is known that polyunsaturated fatty acids play a role in increasing platelet reactivity and that the prothrombotic phenotype plays a crucial role in the occurrence of major adverse cardiovascular events. The ongoing increase in cardiovascular diseases’ incidence emphasizes the importance of research linking lipids and platelet function. In particular, the rebound phenomenon that accompanies discontinuation of clopidogrel in patients receiving dual antiplatelet therapy has been associated with changes in the lipid profile. Our many years of research underline the importance of reduced HDL values for the risk of such a rebound effect and the occurrence of thromboembolic events. Lipids are otherwise a heterogeneous group of molecules, and their signaling molecules are not deposited but formed “on-demand” in the cell. On the other hand, exosomes transmit lipid signals between cells, and the profile of such changes can be monitored by lipidomics. Changes in the lipid profile are organ-specific and may indicate new drug action targets.