Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Solubility of amaranth seed proteins in sodium sulphate and sodium chloride: the main factor in quantitative extraction for analysis

Nitrogen was extracted more efficiently from amaranth seed with 0.04 M Na₂SO₄ (5% w/v) than with either 0.09 M or 0.17 M NaCl (5% or 10% w/v), despite both solutions having the same ionic strength (μ= 1). Solubility of saline soluble proteins (albumin ± globulin) was very poor in either water or 1M NaCl, but increased in 0.4M NaCl at alkaline pH between 7 and 10. Globulins were very soluble in 0.4M NaCl at a pH 9. Albumin was the main storage protein. Saline soluble proteins formed very weak gels.     

Process heat integration of a heavy crude hydrotreatment plant

The present paper focuses on the study of process alternatives for heat integration of a heavy crude oil hydrotreatment plant. Experimental information obtained from a pilot scale, kinetics and reactor modeling tools, and a commercial process simulator were employed to develop mass and energy balances. Four study cases, which employ a combination of quenching and heat exchangers, were identified and evaluated. The results indicated that the case with two quenches with hydrogen and three heat exchangers is the best process heat integration (PHI) option from an energetic point of view.     

THE EFFECT OF TEMPERATURE TREATMENT ON PENETRANT TRANSPORT IN COAL

The macromolecular structure of coals thermally treated at 35^°C, 100^°C and 150^°C was investigated by dynamic penetrant transport in thin coal sections. The effects of temperature, carbon content in coal, and penetrant type on the transport mechanism were investigated. Dynamic swelling studies showed that penetrant transport into coal is a function of the average molecular weight between crosslinks, M_c. The penetrant transport mechanism at low activity is Fickian diffusion. The transport mechanism deviates from Fickian diffusion to anomalous transport, when the carbon content in coal and penetrant activity increase. Variations of the diffusion coefficients and relaxation constants were determined using a diffusion/relaxation coupled model.     

Use of Response Surface Methodology to Investigate the Effectiveness of Commercial Enzymes on Buckwheat Malt for Brewing Purposes

The influence of two factors, total concentration and fraction of three pairs of commercial enzymes, which showed statistical significance (Biocellulase W with Hitempase 2XL, Biocellulase W with Amylo 300 and Amylo 300 with Hitempase 2XL), were studied for their overall effect on buckwheat wort quality using response surface methodology (RSM). This study revealed that the addition of increasing levels of Hitempase 2XL to the buckwheat mash increased colour, extract levels, wort filtration, fermentability and total fermentable extract (TFE), along with decreasing viscosity values. Results also determined a high level of fermentability when an enzyme combination of 30% Biocellulase and 70% Hitempase was added to the mash. The addition of increasing levels of Amylo 300 to buckwheat mashes resulted in increases in fermentability and total fermentable extract (TFE), along with increases in total soluble nitrogen (TSN), free amino nitrogen (FAN) and Kolbach index (KI). With regard to the proposed optimal regime, although no synergistic effect was found when the three enzymes were used together, the optimum conditions for the production of buckwheat wort with lowest viscosity, highest extract and optimal fermentability were achieved using a joint model. Overall, the findings of this study demonstrate the feasibility of producing wort suitable for the brewing of gluten‐free beer from 100% malted buckwheat with careful optimisation of enzyme types and dosage levels.     

Adequacy of medical referrals to hospital emergency service

OBJECTIVE: To assess the correctness and diagnostic concordance in referrals of patients to hospital Casualty Departments (CD); and the possible differences between rural and urban health centres (HC) as well as between general practitioners (GP) and family and community medicine (FCM) specialists. DESIGN: Observational study of a crossover nature. SETTING: Health area 1 in the province of Badajoz. PATIENTS AND OTHER PARTICIPANTS: 800 patients, referred to their local hospital Casualty Department. MEASUREMENTS AND MAIN RESULTS: 50.5% of all referrals were considered justified. 15.1% of the patients referred were admitted to hospital. 50.7% of referrals from GPs were found to be correct, against 47% from FCM specialists; and 49% of those referred from rural HCs were correct, as against 45.9% of those referred from urban HCs (no significant differences). Only 54% of referrals had a diagnostic hypothesis, with diagnostic concordance at 50%. There was diagnostic concordance in 28.1% of GP referrals, against 33.3% of FCM specialists; and in 27.5% of those from rural HCs against 26.1% from urban HCs (no significant differences). CONCLUSIONS: We found no differences in the correctness of referrals or diagnostic concordance of patients seen in the CD of our city's health area, neither between patients referred from rural and urban HCs, nor between patients referred by GPs and FCM specialists.     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes

This work studied the voltammetric response of graphite reinforcement electrodes made of different pencil lead hardness. The studies showed that harder graphite leads, regardless of their manufacturer, are more appropriate as electrode material for voltammetric purposes due to their higher peak currents, increasing sensitivity and reproducibility, with ΔEp closer to the theoretical value for a reversible system.