Crystallization study of chemically vapour-deposited amorphous silicon films by in situ x-ray diffraction

The solid phase crystallization kinetics of chemically vapour-deposited amorphous silicon films were studied by in situ X-ray diffraction. We determined the crystalline volume directly from the Bragg peak intensities at various times during isothermal annealing in the temperature range 578 °C < T < 658 °C. From these experiments we deduced that the crystallization was due to nucleation predominantly at the substrate-film interface followed by crystal growth perpendicular to this interface. The crystal growth rate was thermally activated with an activation energy E_v of 3.1 eV. A strong 〈111〉 preferred orientation of the growing polycrystal was observed and the grain size remained constant at about 60 nm. Evidence of stresses at the amorphous-crystalline interface during the early stages of crystallization was observed. A comparison with previous conductivity measurements is also carried out.     

填充型UTP5类缆的设计和生产控制

对多线对填充型UTP5类室外干线电缆的性能，设计作了简单介绍，并提出了控制要点。     

钠冷快堆中喷雾钠火的计算分析

根据钠冷快堆中喷雾钠火的特点建立了理论模型，编制了SSPRAY程序。该程序模拟钠喷雾燃料过程中钠滴的运动、钠和氧气的燃烧反应、热量传递和质量传递等瞬态过程。用该程序计算了气体和墙壁温度、气体压力、氧气摩尔份额、喷雾流燃烧速率和热量热递速率等主要参数。利用AI实验数据和美国SPRAY－3A的计算结果对程序进行了验证，结果符合较好。     

鼓风引射式燃气燃烧器的计算

提出鼓风式射式燃气燃烧器的基本计算公式与计算结果，并进行结构尺寸与工况分析，确定各种因素对其的影响程度。     

Diffusion bonding of an aluminium-lithium alloy (AA8090) using aluminium-copper alloy interlayers

Diffusion bonds have been produced between sheets of an Al-Li-Cu-Mg-Zr alloy using aluminium-4% copper vapour deposited metallic interlayers. Microstructural changes occurred both in the parent alloy and in the bond interface after diffusion bonding cycles and post-bonding heat treatments were analysed. Different metallographic techniques (light microscopy, scanning and transmission electron microscopy) have been used. Diffusion bonding trials were carried out using the same alloy (AA8090), both in non-superplastic (T6) and superplastic conditions. Differences in their behaviours in relation to diffusion bonding were observed.     

LaK747/509璃璃配方的研究

本工作中我们选择了B₂O₃-La₂O₃-Y₂O₂-ZrO₂系统作为玻璃基础组成。最后获得的LaK747/509玻璃组成中,不含有钍的成份。由于该玻璃具有一系列好的性质,如析晶范围窄、析晶速度慢以及粘度大等等,因此可以成功地在12-30L铂埚中进行熔制,并获得了尺寸为φ200×25mm的高质量玻璃。     

鸭池河水电站压力钢管外压稳定性设计

采用解析法和半解析有限元法分别对鸭池河水电站埋藏式加劲压力钢管进行外压稳定性计算。在计算分析过程中,考虑了初始缺陷因素对埋藏式加劲压力钢管抗外压稳定性的影响,使得计算结果更加接近于工程实际;从而为埋藏式加劲压力钢管的外压稳定性计算提出了一种更加行之有效的方法。     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Learning Recursive Bayesian Multinets for Data Clustering by Means of Constructive Induction

This paper introduces and evaluates a new class of knowledge model, the recursive Bayesian multinet (RBMN), which encodes the joint probability distribution of a given database. RBMNs extend Bayesian networks (BNs) as well as partitional clustering systems. Briefly, a RBMN is a decision tree with component BNs at the leaves. A RBMN is learnt using a greedy, heuristic approach akin to that used by many supervised decision tree learners, but where BNs are learnt at leaves using constructive induction. A key idea is to treat expected data as real data. This allows us to complete the database and to take advantage of a closed form for the marginal likelihood of the expected complete data that factorizes into separate marginal likelihoods for each family (a node and its parents). Our approach is evaluated on synthetic and real-world databases.