Hydrogen production and consumption of organic acids by a phototrophic microbial consortium

Alternative fuel sources have been extensively studied. Hydrogen gas has gained attention because its combustion releases only water, and it can be produced by microorganisms using organic acids as substrates. The aim of this study was to enrich a microbial consortium of photosynthetic purple non-sulfur bacteria from an Upflow Anaerobic Sludge Blanket reactor (UASB) using malate as carbon source. After the enrichment phase, other carbon sources were tested, such as acetate (30 mmol l⁻¹), butyrate (17 mmol l⁻¹), citrate (11 mmol l⁻¹), lactate (23 mmol l⁻¹) and malate (14.5 mmol l⁻¹). The reactors were incubated at 30 °C under constant illumination by 3 fluorescent lamps (81 μmol m⁻² s⁻¹). The cumulative hydrogen production was 7.8, 9.0, 7.9, 5.6 and 13.9 mmol H₂ l⁻¹ culture for acetate, butyrate, citrate, lactate and malate, respectively. The maximum hydrogen yield was 0.6, 1.4, 0.7, 0.5 and 0.9 mmol H₂ mmol⁻¹ substrate for acetate, butyrate, citrate, lactate and malate, respectively. The consumption of substrates was 43% for acetate, 37% for butyrate, 100% for citrate, 49% for lactate and 100% for malate. Approximately 26% of the clones obtained from the Phototrophic Hydrogen-Producing Bacterial Consortium (PHPBC) were similar to Rhodobacter, Rhodospirillum and Rhodopseudomonas, which have been widely cited in studies of photobiological hydrogen production. Clones similar to the genus Sulfurospirillum (29% of the total) were also found in the microbial consortium.     

Chemical characterization of crude petroleum using nanospray desorption electrospray ionization coupled with high-resolution mass spectrometry

Nanospray desorption electrospray ionization (nano-DESI) combined with high-resolution mass spectrometry was used for the first time for the analysis of the polar constituents of liquid petroleum crude oil samples. The analysis was performed in both positive and negative ionization modes using three solvents, one of which (acetonitrile/toluene mixture) is commonly used in petroleomics studies while two other polar solvents (acetonitrile/water and methanol/water mixtures) are generally not compatible with petroleum characterization using mass spectrometry. The results demonstrate that nano-DESI analysis efficiently ionizes petroleum constituents soluble in a particular solvent. When acetonitrile/toluene is used as a solvent, nano-DESI generates electrospray-like spectra. In contrast, strikingly different spectra were obtained using acetonitrile/water and methanol/water. Comparison with the literature data indicates that these solvents selectively extract water-soluble constituents of the crude oil. Water-soluble compounds are predominantly observed as sodium adducts in nano-DESI spectra indicating that addition of sodium to the solvent may be a viable approach for efficient ionization of water-soluble crude oil constituents. Nano-DESI enables rapid screening of different classes of compounds in crude oil samples based on their solubility in solvents that are rarely used for petroleum characterization providing better coverage of the crude oil composition as compared to electrospray ionization (ESI). It also enables rapid characterization of water-soluble components of petroleum samples that is difficult to perform using traditional approaches.     

Chemical analysis of complex organic mixtures using reactive nanospray desorption electrospray ionization mass spectrometry

Reactive nanospray desorption electrospray ionization (nano-DESI) combined with high-resolution mass spectrometry was utilized for the analysis of secondary organic aerosol produced through ozonolysis of limonene (LSOA). Previous studies have shown that LSOA constituents are multifunctional compounds containing at least one aldehyde or ketone groups. In this study, we used the selectivity of the Girard's reagent T (GT) toward carbonyl compounds to examine the utility of reactive nano-DESI for the analysis of complex organic mixtures. In these experiments, 1-100 μM GT solutions were used as the working solvents for reactive nano-DESI analysis. Abundant products from the single addition of GT to LSOA constituents were observed at GT concentrations in excess of 10 μM. We found that LSOA dimeric and trimeric compounds react with GT through a simple addition reaction resulting in formation of the carbinolamine derivative. In contrast, reactions of GT with monomeric species result in the formation of both the carbinolamine and the hydrazone derivatives. In addition, several monomers did not react with GT on the time scale of our experiment. These molecules were characterized by relatively high values of the double bond equivalent and low oxygen content. Furthermore, because addition of a charged GT tag to a neutral molecule eliminates the discrimination against the low proton affinity compounds in the ionization process, reactive nano-DESI analysis enables quantification of individual compounds in the complex mixture. For example, we were able to estimate for the first time the amounts of dimers and trimers in the LSOA mixture. Specifically, we found that the most abundant LSOA dimer was detected at the ～0.5 pg level and the total amount of dimers and trimers in the analyzed sample was ～11 pg. Our results indicate that reactive nano-DESI is a valuable approach for examining the presence of specific functional groups and for the quantification of compounds possessing these groups in complex mixtures.     

Modelling and computation of curing and damage of thermosets

The curing of thermosets is a complex process involving the transition from a fluid into a (visco-) elastic solid. This phase transition comes along with an increase in stiffness and a volume shrinkage of the polymer. The latter may lead to severe residual strains and stresses, which in turn can cause damage in the final, usually quasi-brittle material. In this contribution a constitutive model is developed which takes into account the curing of a thermosetting material together with the process-induced damage as resulting from curing shrinkage. The curing of the material is governed by a phenomenological hypoelastic constitutive equation which includes temporal evolutions for stiffness and volume shrinkage. Thermal and viscous effects are neglected in the present study. An isotropic gradient-enhanced damage model is adapted to describe the damage evolution. The curing-damage model is implemented into a finite element code and numerical examples for thermosetting materials demonstrate that the proposed model is capable to predict cure-induced damage in thermosets.     

Growth of heavily doped monocrystalline and polycrystalline SiGe-based quantum dot superlattices

Various SiGe-based Quantum Dot Superlattices (QDSLs) were grown using an industrial Chemical Vapor Deposition tool with the intent to develop efficient thermoelectric thin films at a large scale. We report first on the growth of monocrystalline SiGe-based QDSLs. We were able to control the SiGe spacer width and the sizes and densities of Ge dots. A vertical ordering behavior was observed for large dot structures, but not for those with the smallest dots (30-70 nm wide, 3 nm high). In situ B doping operated during growth led to hole densities of 5 × 10¹⁹ to 1 × 10²⁰ cm^− 3. We also report on the growth of polycrystalline SiGe-based QDSLs with the same equipment. We show in particular that vertically aligned Ge dots were formed in a similar way as in monocrystalline structures despite the presence of stacking faults and grain boundaries. A heavy p doping was also obtained on some of these structures.     

In situ nanomechanical measurements of interfacial strength in membrane-embedded chemically functionalized Si microwires for flexible solar cells

Arrays of vertically aligned Si microwires embedded in polydimethylsiloxane (PDMS) have emerged as a promising candidate for use in solar energy conversion devices. Such structures are lightweight and concurrently demonstrate competitive efficiency and mechanical flexibility. To ensure reliable functioning under bending and flexing, strong interfacial adhesion between the nanowire and the matrix is needed. In situ uniaxial tensile tests of individual, chemically functionalized, Si microwires embedded in a compliant PDMS matrix reveal that chemical functionality on Si microwire surfaces is directly correlated with interfacial adhesion strength. Chemical functionalization can therefore serve as an effective methodology for accessing a wide range of interfacial adhesion between the rigid constituents and the soft polymer matrix; the adhesion can be quantified by measuring the mechanical strength of such systems.     

Ultrahigh strength of dislocation-free Ni3Al nanocubes

Individual Ni(3) Al nanocubes under pressure are investigated by comparing the compressive strength of both dislocation-free and irradiated Ni(3) Al nanocubes. The results are dicussed in light of the size-dependent and size-independent strength of face-centered cubic (fcc) nanocrystals in the framework of dislocation nucleation at free surfaces. This study sheds more light on the understanding of fundamental deformation mechanisms and size-affected strength in dislocation-free metallic nanocrystals.     

Deformation mechanisms in nanotwinned metal nanopillars

Nanotwinned metals are attractive in many applications because they simultaneously demonstrate high strength and high ductility, characteristics that are usually thought to be mutually exclusive. However, most nanotwinned metals are produced in polycrystalline forms and therefore contain randomly oriented twin and grain boundaries making it difficult to determine the origins of their useful mechanical properties. Here, we report the fabrication of arrays of vertically aligned copper nanopillars that contain a very high density of periodic twin boundaries and no grain boundaries or other microstructural features. We use tension experiments, transmission electron microscopy and atomistic simulations to investigate the influence of diameter, twin-boundary spacing and twin-boundary orientation on the mechanical responses of individual nanopillars. We observe a brittle-to-ductile transition in samples with orthogonally oriented twin boundaries as the twin-boundary spacing decreases below a critical value (～3-4?nm for copper). We also find that nanopillars with slanted twin boundaries deform via shear offsets and significant detwinning. The ability to decouple nanotwins from other microstructural features should lead to an improved understanding of the mechanical properties of nanotwinned metals.     

Temperature and frequency dependences of real part of impedance in the FeCoZr-doped PZT nanogranular composites

The study of carrier transport in granular nanocomposite films consisting of ferromagnetic Fe₄₅Co₄₅Zr₁₀ alloy nanoparticles embedded in a low-conductive Pb₈₁Sr₄(Na₅Bi₅)₁₅(Zr_57.5Ti_42.5)O₃ matrix has been performed. Real part of the impedance of the nanocomposites was studied as a function of composition, temperature and frequency, for the samples with 25 ?? x ?? 80 at.%, deposited by ion-beam sputtering in Ar + O₂ gas mixture at the oxygen pressures of $P_{O_2 } $ = 2.4·10^?3 and 3.7·10^?3 Pa. It has been proved that approaching the threshold concentration, x _C in the FeCoZr alloy resulted in the transition from high-ohmic to low-ohmic state with the x increase, without the change of hopping mechanism of carrier transport.     

Edge enhancement of color images using a digital micromirror device

A method for orientation-selective enhancement of edges in color images is proposed. The method utilizes the capacity of digital micromirror devices to generate a positive and a negative color replica of the image used as input. When both images are slightly displaced and imagined together, one obtains an image with enhanced edges. The proposed technique does not require a coherent light source or precise alignment. The proposed method could be potentially useful for processing large image sequences in real time. Validation experiments are presented.