不锈钢在扭转/拉伸复合载荷下近门槛值的疲劳裂纹扩展行为

研究了带环状预裂纹的奥氏体不锈钢圆棒试样在循环扭转／拉伸复合载荷下，门槛值附近的疲劳裂纹扩展行为，分析了复合加载时不同载荷比对裂纹扩展的影响，对裂纹扩展的初始阶段进行了详细研究，用应力强度因子表征了裂纹扩展开始的门槛值．提出了椭圆方程表达的疲劳裂纹扩展开始的门槛值模型，该方程可在裂纹尖端位移准则的基础上导出．疲劳裂纹扩展停止的门槛值条件也可用椭圆方程表达．     

High-power hybrid plasma spraying of large yttria-stabilized zirconia powder

To testify to the advantage of large ceramic powder spraying, numerical simulations and experimental studies on the behavior of large yttria-stabilized zirconia (YSZ) powder in a high-power hybrid plasma spraying process have been carried out. Numeric predictions and experimental results showed that, with the high radio frequency (RF) input power of 100 kW, the most refractory YSZ powder with particle sizes as large as 88 μm could be fully melted and well-flattened splats could be formed. A large degree of flattening (ξ) of 4.7 has been achieved. The improved adhesive strength between the large splat and the substrate was confirmed based on the measurement of the crack density inside of the splats. A thick YSZ coating >300 μm was successfully deposited on a large CoNiCrAlY-coated Inconel substrate (50×50×4 mm in size). The ultradense microstructure without clear boundaries between the splats and the clean and crack-free interface between the top-coat and the bond-coat also indicate the good adhesion. These results showed that highpower hybrid plasma spraying of large ceramic powder is a very promising process for deposition of highquality coatings, especially in the application of thermal barrier coatings (TBCs).     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.     

Current control of a PWM power amplifier by an approximate 2-degree-of-freedom digital controller

There is a need for robust current control of a pulse width modulation (PWM) power amplifier whose transient response characteristics do not deteriorate with extensive load changes and/or direct-current power supply voltage changes. In this article, we propose a digital robust controller with bumpless mode switching to control the current of a PWM power amplifier to satisfy the demands and extend the range of an inductive load width. It is necessary to measure the value of the load in order to implement this bumpless mode switching automatically depending on the load range. Therefore, a method of estimating the inductive load is shown. The bumpless mode switching is automatically performed by estimating an inductive value without specifying the value of the inductive load beforehand. That is, the value of the inductive load is estimated during the DDC execution, and the control mode is automatically switched bumplessly according to this estimated value. A digital controller equipped with inductance estimation and bumpless mode switching is realized by a DSP. Some experiments show that the digital controller with the proposed bumpless mode switching can satisfy larger specifications.     

The effects of amino-acid mutations on specific interactions between urokinase-type plasminogen activator and its receptor: Ab initio molecular orbital calculations

During cancer invasion, the binding of urokinase-type plasminogen activator (uPA) to its receptor (uPAR) on the surface of a cancer cell is considered a trigger for invasion. Here, we present a stable structure of the solvated complex formed between uPA and uPAR (uPA-uPAR) and investigate the specific interactions between uPA and uPAR by ab initio fragment molecular orbital (FMO) calculations. The result indicates that the electrostatic interactions between the charged amino acid residues existing in both uPA and uPAR make a large contribution to the binding between uPA and uPAR. In particular, Lys23, Lys46, Lys98 and Lys61 of uPA are found to have strong attractive interactions with uPAR. To elucidate the effect of these residues on the interactions between uPA and uPAR, we substituted each of them with the uncharged amino acid Leu and investigated the interactions between the mutated uPA and wild-type uPAR. The interaction energies indicate that Lys46 and Lys98, which bind uPA to the rim of the central ligand-binding cavity of uPAR, make greater contributions to the binding between uPA and uPAR than Lys23, which is positioned at the bottom of the ligand-binding cavity of uPAR. The effect of hydrating water molecules located between uPA and uPAR is also investigated to be significant for the specific interactions between uPA and uPAR. These results are expected to be informative for developing new peptide antagonists that block the binding of uPA to uPAR.     

Control of three-link underactuated manipulators using a switching method of fuzzy energy regions

In general, manipulators used for industry and in academic laboratories have actuators to drive each joint. On the other hand, underactuated manipulators handled by our research have some passive or free joints without actuators and brakes. We recently developed a switching method of fuzzy energy regions to control such manipulators. In such a method, it is necessary to design parameters related to energy regions and the gains of some partly stable controllers based on the computed torque method. Here, the switching method is applied for a three-link underactuated manipulator. We optimize such design parameters related to fuzzy energy regions by a genetic algorithm. The effectiveness of the present method is illustrated with some simulations. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Plasma etching of high-k and metal gate materials

Etching characteristics of high-k dielectric materials (HfO₂) and metal electrode materials (Pt, TaN) have been studied in high-density chlorine-containing plasmas at pressures around 10 mTorr. The etching of HfO₂ was performed in BCl₃ without rf biasing, giving an etch rate of about 5 nm/min with a high selectivity of >10 over Si and SiO₂. The etching of Pt and TaN was performed in Ar/O₂ with high rf biasing and in Ar/Cl₂ with low rf biasing, respectively, giving a Pt etch rate of about several tens nm/min and a TaN etch rate of about 200 nm/min with a high selectivity of >8 over HfO₂ and SiO₂. The etched profiles were outwardly tapered for Pt, owing to the redeposition of etch or sputter products on feature sidewalls, while the TaN profiles were almost anisotropic, probably owing to the ion-enhanced etching that occurred.     

Quantum Bit-commitment for small storage based on quantum one-way permutations

We propose a quantum bit-commitment scheme based on quantum one-way permutations with the unconditionally binding and computationally concealing property. Our scheme reduces exponentially the number of bits which the receiver needs to store until, the opening phase compared with the classical counterpart. Keisuke Tanaka, Ph.D.: He is Assistant Professor of Department of Mathematical and Computing Sciences at Tokyo Institute of Technology. He received his B.S. from Yamanashi University in 1992 and his M.S. and Ph.D. from Japan Advanced Institute of Science and Technology in 1994 and 1997, respectively. For each degree, he majored in computer science. Before joining Tokyo Institute of Technology, he was Research Engineer at NTT Information Sharing Platform Laboratories. His research interests are cryptography, quantum computation, circuit complexity, and the design and analysis of algorithms.