Determination of assigned configurational parameters for cross propagation in radical copolymerization of methyl methacrylate and trityl methacrylate

Summary Copolymer of methyl methacrylate-d₈(M₁) with a small amount of trityl methacrylate(M₂) was radically prepared in tetrahydrofuran and converted into the copolymer of methyl methacrylate-d₈ with a small amount of undeuterated methyl methacrylate by the selective hydrolysis of the trityl group and subsequent methylation with diazomethane. From the ¹H NMR spectrum of the derived copolymer the assigned coisotactic parameters ₁₂ and ₂₁ were determined to be 0.14 and 0.61, respectively. This may be the first example of the unequivocal determination of assigned configurational parameters in cross propagation for copolymerization.     

Simple plunge freezing applied to plant tissues for capturing the ultrastructure close to the living state

In order to observe the ultrastructure close to the living state, simple plunge freezing in liquid propane was applied to plant tissues. The method yielded a well-preserved ultrastructure to a depth of up to 40 microm from the surface of the young pea leaves, which were used as the specimen. Within the well-frozen area all membranes appeared smooth and the ultrastructural details of each organelle were similar to those obtained by high-pressure freezing. Several physical connections between the membranes were visualized. The relative simplicity and the satisfactory freezing performance of the method render it suitable for capturing the features of actively functioning cells in routine ultrastructural studies.     

Microstructures of galvannealing coats plated on an iron substrate deformed by indentation

Two different galvannealed (GA) steels with different formability performances were deformed at room temperature with a micro-Vickers indenter. Cross-sectional specimens for transmission electron microscopy were prepared from the indented areas using a focused ion beam technique. Direct evidence of plastic deformation of the GA coats was obtained. Cracks were observed to nucleate at triple points of two neighbouring Gamma and substrate Fe. The GA coat with better formability has finer grains than the GA coat, with worse formability.     

Resonator filters using shear horizontal-type leaky surface acoustic wave consisting of heavy-metal electrode and quartz substrate

The authors have succeeded in exciting a new type of leaky surface acoustic wave (LSAW) having only a shear horizontal (SH) component that has a large electromechanical coupling factor, a large reflection coefficient, and excellent temperature stability, by combining interdigital transducers (IDTs) and reflectors made of heavy-metal films such as gold (Au), tantalum (Ta), and tungsten (W) on the ST-cut 90/spl deg/ X propagation (direction perpendicular to the X-axis) quartz substrate. This LSAW does not have a propagation decay. The square of the electromechanical coupling factor is 2.1-2.7 times larger than, the reflection coefficient is 30 times larger than, and the temperature characteristic is the same as those of a Rayleigh wave on an ST-cut X propagation quartz substrate. The authors applied this SH LSAW to resonators and resonator filters. As a result, we succeeded in developing the low loss and very small-sized resonators and resonator filters (1/5-1/4 of conventional device sizes) with IDTs with a small number of finger pairs and very small reflectors, for the first time.     

Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Portable sick house syndrome gas monitoring system based on novel colorimetric reagents for the highly selective and sensitive detection of formaldehyde

Formaldehyde (HCHO) emitted from the furniture and the walls in the rooms injures the eyes, nose, and respiratory organs and causes allergies, which is called sick house syndrome. We designed and synthesized novel colorimetric HCHO-sensing molecules (KD-XA01 and KD-XA02) which possess an enaminone structure and developed a hand-held instrument to monitor indoor HCHO gas with the use of KD-XA01. These sensing molecules produced speedy color changes from colorless to yellow under mild conditions, which was caused by the fact that the enaminone structure in the reagent reacts with HCHO to give a lutidine derivative. This reaction took place not only in the solution phase but also in the solid phase (surface of the cellulose paper). To take advantage of this phenomena, a handy and rapid monitoring system has been developed for detecting indoor HCHO gas using a highly sensitive and selective detection tablet constructed from the porous cellulose paper that contains silica gel as an adsorbent, KD-XA01, and phosphoric acid under optimum conditions. This instrument detected the surface color change of the tablet from white to yellow, which was monitored as a function of the intensity of the reflected light illuminated by an LED (475 nm). The response was proportional to the HCHO concentration at a constant sampling time and flow rate; 0.05 ppm HCHO, which is under the standard value set by the World Health Organization, was able to be detected in 5 min. The detection limit was 0.005 ppm. This monitoring system was not interfered by carbonyl compounds such as acetaldehyde and acetone, alcohols, hydrocarbons, and typical gases such as carbon monoxide, carbon dioxide, nitrogen dioxide, etc., which contributes to the measurement of correct HCHO concentrations. It was possible to monitor the HCHO gas in the room of a new apartment and school using this instrument; the response values were in good agreement with those obtained by the standard DNPH method. This highly sensitive, selective, and handy HCHO gas monitor is widely applicable and convenient for users who are not specialists in this field.     

Optimal boiler control through real-time monitoring of unburned carbon in fly ash by laser-induced breakdown spectroscopy

A laser-induced breakdown spectroscopy (LIBS) technique has been applied for detection of unburned carbon in fly ash, and an automated LIBS unit has been developed and applied in a 1000-MW pulverized-coal-fired power plant for real-time measurement, specifically of unburned carbon in fly ash. Good agreement was found between measurement results from the LIBS method and those from the conventional method (Japanese Industrial Standard 8815), with a standard deviation of 0.27%. This result confirms that the measurement of unburned carbon in fly ash by use of LIBS is sufficiently accurate for boiler control. Measurements taken by this apparatus were also integrated into a boiler-control system with the objective of achieving optimal and stable combustion. By control of the rotating speed of a mill rotary separator relative to measured unburned-carbon content, it has been demonstrated that boiler control is possible in an optimized manner by use of the value of the unburned-carbon content of fly ash.     

Electron holographic 3-D nano-analysis of Au/TiO2 catalyst at interface

Three-dimensional (3-D) nanostructures of gold catalysts supported on TiO2 were analysed by electron holography and high-resolution electron microscopy. The contact angle of the gold particle on TiO2 tended to be >90 degrees in the case of gold particles with a size (height) of >4 nm and it tended to be <90 degrees for gold particles with a height of <2 nm. The change in morphology increases the perimeter at the Au/TiO2 interface as the particle size decreases. This change in 3-D structure should be attributed to a change in electronic structure at the interface. It was found that electron holography enabled 3-D analysis at the atomic level and was effective for analysing nanostructured particles.     

Electrical conductivity of homopolymer and copolymers of <Emphasis Type="Italic">N</Emphasis>-vinylcarbazole

Poly(N-vinylcarbazole) (PVCz) is well known as an electroactive material due to its good photoconductivity, charge-transfer complexes, photoluminescence and electroluminescence properties. The block copolymers of N-vinylcarbazole were prepared and the effects of the relative composition, molar masses, architecture and doping on its electrical behavior were investigated. Controlled free radical polymerization has been carried out using nitroxide-mediated process in order to prepare a series of block copolymers of N-vinylcarbazole. 2,2,6,6-Tetramethyl-1-piperidinyloxy radical (TEMPO) was used to end-cap “living” homopolymer of p-bromostyrene, which was further used as a macroinitiator to polymerize N-vinylcarbazole and styrene. The copolymers have been doped at room temperature with LiClO₄ and the electrical conductivities were measured by two-probe method, which have shown to depend on copolymer’s relative composition and molar masses.     

Thermal Degradation Under Pulse Operation in Low-Temperature p-Channel Poly-Si Thin-Film Transistors

We analyzed the heat generation of a low-temperature polycrystalline thin-film transistor in pulse operation and proposed a technique for accurately measuring its thermal temperature in high-frequency operation. From this measurement, we were able to calculate the time constants for heating and radiation for the first time. At a low frequency, the temperature difference between when the pulse was on and off was remarkable. As the frequency was increased, the maximum and minimum temperatures approached each other and became equal at a frequency of approximately 1 kHz. We also measured the degradation in pulse operation and discussed the relationship between the thermal temperature and the degradation in the pulse operation