Secretion of gastrin and calcitonin after ingestion of meat extract in patients with peptic ulcer

A 73-year-old man with malignant lymphoma who was undergoing treatment with systemic chemotherapy presented with an acute, febrile illness associated with cough and sputum production. The patient developed bilateral, diffuse, pulmonary interstitial infiltrates with rapidly progressive respiratory insufficiency. The diagnosis was made by demonstrating Blastomyces dermatitidis in bronchial brush and transbronchial lung biopsy specimens obtained through fiberoptic bronchoscopy.     

Impedance characteristics of double-hetero structure laser diodes

The effects of the onset of lasing on the I-V characteristics, the impedance characteristics and the light modulation characteristics of laser diodes have been discussed by introducing the rate equations which involve carrier diffusion process in the active layer interacting with the radiation field intensity. The static I-V characteristics exhibit a kink at lasing threshold current, reflecting the decrease of effective lifetime of carriers. Effective carrier lifetimes decrease with increasing light intensity, which results in a steep attenuation of injected carrier density in the active region. The impedance and light modulation characteristics are obtained in the small signal approximation. The small signal light modulation characteristics depend strongly on whether the laser diode is excited by the constant current modulation or the constant voltage modulation. The impedance is changed drastically by the onset of lasing and exhibits a resonance which coincides exactly with the optical modulation resonance frequency.     

Recombination lifetime in a semiconductor laser diode

The effect of minority carrier lifetime on the impedance of the laser within a diffusion or a drift length from the junction is analyzed. Lifetime shorting due to stimulated recombination (which is a function of the injection current) is considered and the effect of cavity size on the ability to modulate the laser at high frequencies is pointed out.     

Numerical study on the spectroscopic ellipsometry of lamellar gratings made of lossless dielectric materials

The spectroscopic ellipsometry of lamellar gratings made of lossless dielectric materials is studied numerically by using the rigorous coupled-wave method with the use of Li's Fourier factorization rules [J. Opt. Soc. Am. A 13, 1870 (1996)], which are known to improve the convergence on the analyses of metallic gratings. Numerical results show that the calculation method also provides fast convergence on lossless gratings, and accurate values of the ellipsometric angles are obtained in very short computation times. Moreover, estimation of grating parameters is investigated by using a cost function defined by the average distance on the Poincaré sphere, and it is shown that the computation required for accurate estimation is possible in reasonable computation time.     

Avalanche induced dispersion in IMPATT diodes

Numerical analysis has been performed on the effect of the carrier dispersion caused by avalanching on the small signal admittance and the transient step response in the avalanche region of an idealized IMPATT diode having a uniform electric field profile. The degree of dispersion, referred to hereafter as Avalanche Induced Dispersion (AID), depends on the relative magnitudes of ionization rates of the two carriers. AID becomes largest when the two ionization rates are equal and decreases with increasing discrepancy between them.It is found that the build-up of an avalanche can be faster if either electrons or holes are strongly ionizing than when both of them ionize equally. Also, the small signal negative conductance is minimum when the dispersion is most pronounced. Since the time delay in the avalanche build-up depends strongly on AID, the upper limit of the high-frequency performance of IMPATT diodes can be estimated from the theoretical value of AID.     

Grain refinement and superplasticity of pipes processed by high-pressure sliding

ABSTRACT

The high-pressure sliding (HPS) process was applied for grain refinement of a pipe form of an Al-3wt%Mg-0.2wt%Sc alloy by developing two types of straining techniques (called in this study anvil sliding and mandrel sliding). To achieve a homogeneous microstructure throughout the cross-section of the pipe, the sample is rotated around the longitudinal axis every after sliding operation by introducing multi-pass technique, named multi-pass HPS (MP-HPS) as developed earlier for rods. The MP-HPS-processed sample shows ultrafine-grained structures with an average grain size of ～260 and ～300?nm after the HPS processing using anvil sliding and mandrel sliding. The samples also exhibit superplasticity with total elongations well more than 400%, respectively. A finite-element method is used to simulate the evolution of strain in the HPS processing and demonstrates that the simulation well represents the experimental results.     

A Fluid Liquid‐Crystal Material with Highly Polar Order

An anomalously large dielectric permittivity of ≈10⁴ is found in the mesophase temperature range (MP phase) wherein high fluidity is observed for a liquid‐crystal compound having a 1,3‐dioxane unit in the mesogenic core (DIO). In this temperature range, no sharp X‐ray diffraction peak is observed at both small and wide Bragg angles, similar to that for a nematic phase; however, an inhomogeneous sandy texture or broken Schlieren one is observed via polarizing optical microscopy, unlike that for a conventional nematic phase. DIO exhibits polarization switching with a large polarization value, i.e., P = 4.4 µC cm^?2, and a parallelogram‐shaped polarization–electric field hysteresis loop in the MP phase. The inhomogeneously aligned DIO in the absence of an electric field adopts a uniform orientation along an applied electric field when field‐induced polarization switching occurs. Furthermore, sufficiently larger second‐harmonic generation is observed for DIO in the MP phase. Second‐harmonic‐generation interferometry clearly shows that the sense of polarization is inverted when the +/? sign of the applied electric field in MP is reversed. These results suggest that a unidirectional, ferroelectric‐like parallel polar arrangement of the molecules is generated along the director in the MP phase.     

Robust bin-picking system using tactile sensor

ABSTRACT

This paper presents a robust bin-picking system utilizing tactile sensors and a vision sensor. The object position and orientation are estimated using a fast template-matching method through the vision sensor. When a robot picks up an object, the tactile sensors detect the success or failure of the grasping, and a force sensor detects the contact with the environment. A weight sensor is also used to judge whether the lifting of the object has been successful. The robust and efficient bin-picking system presented herein is implemented through the integration of different sensors. In particular, the tactile sensors realize rope-shaped object picking that has yet to be made possible with conventional picking systems. The effectiveness of the proposed method was confirmed through grasping experiments and in a competitive event at the World Robot Challenge 2018.     

Grafting of branched polymers onto nano-sized silica surface: Postgrafting of polymers with pendant isocyanate groups of polymer chain grafted onto nano-sized silica surface

To control the surface wettability of nano-sized silica surface, the postgrafting of hydrophilic and hydrophobic polymers to grafted polymer chains on the surface was investigated. Polymers having blocked isocyanate groups were successfully grafted onto nano-sized silica surface by the graft copolymerization of methyl methacrylate (MMA) with 2-(O-[1′-methylpropylideneamino]caboxyamino)ethyl methacrylate (MOIB) initiated by azo groups previously introduced onto the surface. The blocked isocyanate groups of poly(MMA-co-MOIB)-grafted silica were stable in a desiccator, but isocyanate groups were readily regenerated by heating at 150 °C. The hydrophilic polymers, such as poly(ethylene glycol) (PEG) and poly(ethyleneimine) (PEI), were postgrafted onto the poly(MMA-co-MOIB)-grafted silica by the reaction of functional groups of PEG and PEI with pendant isocyanate groups of poly(MMA-co-MOI)-grafted silica to give branched polymer-grafted silica. The percentage of grafting increased with increasing molecular weight of PEG, but the number of postgrafted chain decreased, because of steric hindrance. The hydrophobic polymers, such as poly(dimethylsiloxane) were also postgrafted onto poly(MMA-co-MOI)-grafted silica. It was found that the grafting of hydrophobic polymer and the postgrafting of hydrophilic polymer branches readily controls the wettability of silica surface to water.