Polyester polyols for waterborne polyurethanes and hybrid dispersions

In this study, environmentally friendly polyester based polyurethane dispersions (PUDs) were synthesized using various combinations of isophthalic acid, adipid acid and maleic anhydride (IPA-AA-MA). A triangular empirical model was employed to optimize total number of experiments for optimal performance of polyurethane dispersions. In addition to PUDs, polyurethane/acrylate hybrid dispersions (PU/AC) were synthesized using graft copolymerization method to enhance the performance/properties of PUDs and for potential cost benefit.     

人造纤维用抗菌母粒

<正>合成纤维行业一直在寻找新功能特性以满足不断增长的功能面料行业的需要。功能性纺织面料可用于多种应用,包括运动服装、保健、汽车和时装等等。抗菌面料能够抑制细菌繁殖、改善面料清新度和卫生状况,为制造商提升产品价值。     

Evaluation of Multipoint Dosing Strategy in a Miniaturized Tubular Reactor: Nitration of Salicylic Acid

A 2D non‐isothermal reaction engineering model for a tubular reactor was developed for a complex reaction network of salicylic acid nitration. The influence of different operating and design parameters was studied to minimize the amount of secondary nitration products and limit the maximum temperature inside the reactor. Critical temperature effects were observed for larger reaction tubes, whereas close to isothermal conditions were perceived in smaller tubes. With single‐point dosing of both reactants, complete conversion can be achieved but formation of secondary nitration products cannot be avoided. For a given number of dosing points, a suitable combination of the operating parameters allowed to achieve complete conversion and better yield of the desired product.     

Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime over Different Ferrierite Zeolite Catalysts

Ferrierite zeolite catalysts prepared using different procedures have been tested for their activity for vapor phase Beckmann rearrangement of cyclohexanone oxime to -caprolactam. We report here the results of a study seeking the influence of temperature, nitrogen feed rate, oxime concentration and solvents on the catalyst performance. At low concentration of oxime (2.5 wt%), using acetonitrile as solvent the maximum in the conversion of oxime and selectivity to -caprolactam has been obtained. The presence of weak, medium and strong acid sites as indicated by temperature-programmed desorption of NH₃ corroborates well with the catalytic activities of various ferrierites shown here. Solvent polarity is found to significantly affect the conversion of cyclohexanone oxime.     

Web services: e-commerce partner integration

Online retailers have used a succession of technologies to showcase their products and services on the Web. That experience gives them a greater insight into what it is that the latest technology, Web services, can offer them. This article gives a brief survey of the evolution of evolving e-commerce technologies, explaining what each offered and could not offer to retailers. It then describes how Amazon's investment in its e-commerce services (ECS) gives Amazon partners access to common online retailing functionalities. These researchers also present the partner integration framework they developed to help retailers define what services they need in an online retail system.     

Advances in pulsed-laser-deposited AIN thin films for high-temperature capping, device passivation, and piezoelectric-based RF MEMS/NEMS resonator applications

In this paper we report recent advances in pulsed-laser-deposited AIN thin films for high-temperature capping of SiC, passivation of SiC-based devices, and fabrication of a piezoelectric MEMS/NEMS resonator on Pt-metallized SiO₂/Si. The AlN films grown using the reactive laser ablation technique were found to be highly stoichiometric, dense with an optical band gap of 6.2 eV, and with a surface smoothness of less than 1 nm. A low-temperature buffer-layer approach was used to reduce the lattice and thermal mismatch strains. The dependence of the quality of AlN thin films and its characteristics as a function of processing parameters are discussed. Due to high crystallinity, near-perfect stoichiometry, and high packing density, pulsed-laser-deposited AlN thin films show a tendency to withstand high temperatures up to 1600°C, and which enables it to be used as an anneal capping layer for SiC wafers for removing ion-implantation damage and dopant activation. The laser-deposited AlN thin films show conformal coverage on SiC-based devices and exhibit an electrical break-down strength of 1.66 MV/cm up to 350°C when used as an insulator in Ni/AlN/SiC metal-insulator-semiconductor (MIS) devices. Pulsed laser deposition (PLD) AlN films grown on Pt/SiO₂/Si (100) substrates for radio-frequency microelectrical and mechanical systems and nanoelectrical and mechanical systems (MEMS and NEMS) demonstrated resonators having high Q values ranging from 8,000 to 17,000 in the frequency range of 2.5–0.45 MHz. AlN thin films were characterized by x-ray diffraction, Rutherford backscattering spectrometry (in normal and oxygen resonance mode), atomic force microscopy, ultraviolet (UV)-visible spectroscopy, and scanning electron microscopy. Applications exploiting characteristics of high bandgap, high bond strength, excellent piezoelectric characteristics, extremely high chemical inertness, high electrical resistivity, high breakdown strength, and high thermal stability of the pulsed-laser-deposited thin films have been discussed in the context of emerging developments of SiC power devices, for high-temperature electronics, and for radio frequency (RF) MEMS.     

Distributed on-demand address assignment in wireless sensornetworks

Sensor networks consist of autonomous wireless sensor nodes that are networked together in an ad hoc fashion. The tiny nodes are equipped with substantial processing capabilities, enabling them to combine and compress their sensor data. The aim is to limit the amount of network traffic, and as such conserve the nodes' limited battery energy. However, due to the small packet payload, the MAC header is a significant, and energy-costly, overhead. To remedy this, we propose a novel scheme for a MAC address assignment. The two key features which make our approach unique are the exploitation of spatial address reuse and an encoded representation of the addresses in data packets. To assign the addresses, we develop a purely distributed algorithm that relies solely on local message exchanges. Other salient features of our approach are the ability to handle unidirectional links and the excellent scalability of both the assignment algorithm and address representation. In typical scenarios, the MAC overhead is reduced by a factor of three compared to existing approaches     

Role of Calcium in the Evolution of Superconductivity in a (La2?xRx)Ba2(CayCu4+y)Oz (R = Y, Er, Gd) System

It has been reported that, by adding equal amounts of CaO and CuO to non superconducting La₃Ba₃Cu₆O _z (La-336), a series of superconductors with nominal compositions La₃Ca _y Ba₃Cu_6+y O _z were prepared with maximum T^on _c 80K. Similar studies on addition of CaO and CuO in nonsuperconducting LaBaCu₂O _z (La-112) resulted into superconducting LaCaBaCu₃O _z (La-1113). To date no attempt has been made to synthesize La₂CaBa₂Cu₅O _z (La-2125) superconducting phase by addition of CaO and CuO to non superconducting La₂Ba₂Cu₄O _z (La-224) system. Also no reports are published to study the effect of replacing larger La³⁺-ions (1.01Å) by smaller rare earth ions viz Y³⁺(0.89Å), Er³⁺(0.91Å), Gd³⁺(0.91Å) on the structural and superconducting properties of (La_2–x R _x )Ba₂(Ca _y Cu_4+y )O _z (LRBCaC); 0.0 x 0.5; y=2x system. In this paper, we report the method of synthesis, structural and superconducting property characterization using X-ray diffraction, oxygen content measurements using iodometry, resistivity measurements using d.c. four probe technique and a.c. susceptibility measurements in the temperature range RT to 15K. Also a comparative study, on the evolution of superconducting phase with Ca-concentration for different rare earth substitutions for LRBCaC system in the context of hole doping mechanism, is carried out.     

Growth, optical transmission and X-ray photoemission studies of BaB2O4 single crystals

Beta barium borate (-BBO) crystals have been grown by the top seeded solution growth technique (TSSG) using Na₂O as a flux. The crystals exhibited high transparency and the absence of inclusions and found to have sodium contamination in the range 150 to 230 p.p.m. The effect of this contamination on some crystal properties of interest has been investigated. The presence of impurities causes optical absorption below 550 nm in BBO crystals of both and -phases. X-ray photo emission spectroscopy (XPS) measurements performed on these crystals show that sodium gives rise to a measurable shift in the binding energies of the constituent ions. Further, the results show that Na⁺ ions enter into the lattice substitutionally and provide charge trapping sites close to the band edge.     

ANN modeling of DNA sequences: new strategies using DNA shape code

Two new encoding strategies, namely, wedge and twist codes, which are based on the DNA helical parameters, are introduced to represent DNA sequences in artificial neural network (ANN)-based modeling of biological systems. The performance of the new coding strategies has been evaluated by conducting three case studies involving mapping (modeling) and classification applications of ANNs. The proposed coding schemes have been compared rigorously and shown to outperform the existing coding strategies especially in situations wherein limited data are available for building the ANN models.