Particularities of condensation of atoms with increased kinetic energy

Novel universal method for measurement of the condensation coefficient α is developed. Using this method, noticeable difference between measured (α≈0.8) and expected (α≈1) values of the condensation coefficient for sputtered Cr atoms was revealed for the first time. The effect is assumed to be a result of considerable elevation of the surface temperature during atomic condensation induced by the energy delivered to the condensation surface by sputtered atoms and from the plasma.     

Grain boundary effect on electron-beam-induced current in La3Ga5.5Ta0.5O14 crystal

La₃Ga_5.5Ta_0.5O₁₄ crystal recently attracted more attention due to its superior electromechanical properties and high Q × f product. We report that the first electron-beam-induced current experiment on La₃Ga_5.5Ta_0.5O₁₄ single crystal. This method is employed to study the effect of the crystal's grain boundary on the incident electron beam. The experimental results clearly show that when the electron beam scans over the grain boundary of the crystal, a fraction of the carriers recombine at the grain boundary and is unavailable for the current generation. This recombination rate will be enhanced when the electron beam was close to the boundary and cause a dip in the collected current. Although the crystal is an insulator, this effect still can be observed if the coating metal is proper to be chosen. It is also pointed out that the different diffusion lengths of the crystal might be due to the tilted grain boundary.     

Microwave remote sensing of physically buried objects in the Negev Desert: implications for environmental research

We report remote detections of physically buried specularly reflecting objects using microwave radar at two sites: Ashalim and Tseelim in the northern region of the Negev Desert, Israel. These detections provide confirmation that microwave subsurface remote sensing is a genuine phenomenon. At Ashalim, a scatterometer operating in the P-band (441 MHz, 68 cm) was mounted on a cherry picker truck at a height of 8 m and used to detect two triangular aluminum mesh reflectors (forming a 1-m square area reflector) buried down to a depth of 8 cm in dry sand. At Tseelim, the same scatterometer was mounted on an airplane flying at an altitude of 70 m and used to detect 1-m square aluminum reflectors (each one submerged at a different location along the airplane flight path) buried down to a depth of 20 cm. The experimental results compare favorably with a theoretical model that incorporates radar absorption effects arising in the sandy subsurface layer and radar interference effects arising from phase differences between reflections from the surface and buried reflector. The theoretical modeling also predicts the detection of a subsurface reflector down to a depth of about 4.4 m. This experiment and the associated modeling approach is the first of a series of planned experiments, which we outline for the detection and the theoretical evaluation of buried reflectors using remote microwave and VHF radar. We identify potential subject areas for environmental research.     

On the H fixed-lag smoothing: how to exploit the information preview

The problem of the continuous-time H^∞ fixed-lag smoothing over the infinite horizon is studied. The first solution to the problem is derived in terms of one algebraic Riccati equation of the same dimension as in the filtering case and the mechanism by which the performance improvements with respect to the H^∞ filtering occur is clarified. It is shown that the H^∞ smoother exploits the information preview in an “H² manner”.     

Models of approximation in databases

Partial information in databases can arise when information from several databases is combined. Even if each database is complete for some “world”, the combined databases will not be, and answers to queries against such combined databases can only be approximated. In this paper we describe various situations in which a precise answer cannot be obtained for a query asked against multiple databases. Based on an analysis of these situations, we propose a classification of constructs that can be used to model approximations.

The main goal of the paper is to study several formal models of approximations and their semantics. In particular, we obtain universality properties for these models of approximations. Universality properties suggest syntax for languages with approximations based on the operations which are naturally associated with them. We prove universality properties for most of the approximation constructs. Then we design languages built around datatypes given by the approximation constructs. A straightforward approach results in languages that have a number of limitations. In an attempt to overcome those limitations, we explain how all the languages can be embedded into a language for conjunctive and disjunctive sets from Libkin and Wong (1996) and demonstrate its usefulness in querying independent databases. We also discuss the semantics of approximation constructs and the relationship between them.     

Decision support in pre-hospital stroke care operations: A case of using simulation to improve eligibility of acute stroke patients for thrombolysis treatment

Stroke is the third most common cause of death and the sixth most common cause of disability worldwide. Treating acute ischemic stroke with thrombolytic therapy within 4.5 hours from symptom onset is effective in improving patient outcomes. The time from stroke onset to arrival to hospital has been identified as the single most important issue in determining patients' eligibility for stroke thrombolysis. There is a need for simultaneous systemic evaluation of multi-factorial interventions in pre-hospital acute care systems, aimed at increasing patients' eligibility for stroke thrombolysis. In this paper an OR solution is proposed in the form of a simulation model that provides clear measure of the relative benefit of alternative potential interventions, demonstrating how OR modeling can be used for providing decision support in pre-hospital stroke care operations and contributing to health OR literature.     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

A case study on the object-oriented framework for modeling product families with the dominant variation of the topology in the one-of-a-kind production

Traditional configuration-based product family modeling techniques do not yield favorable solutions for modeling the product families with the dominant product topology variations. This paper presents the case study for the modeling of variations of the product configuration, parameters, and topologies in mass production of custom windows and doors in a one-of-a-kind production (OKP) company. The case study is based on the object-oriented product family modeling framework we developed for OKP which is characterized by the dominant product variation by topology. The problem of variation in topology in our framework is solved by the manual model transformation in the computer-aided design module which creates a new metamodel of products with the desired topology and which is the basis for a further, automatic model transformation. Usage of our framework has a positive effect on the level of the product customizations and shortening of the leading time which helps OKP companies in obtaining a better position at the market. Our software solution for the designing and manufacturing of custom windows and doors based on our framework is implemented in more than 300 mostly small- and medium-sized enterprises. It proves our concept which can be used for the realization of the information systems for computer-aided one-of-a-kind production in the companies with a different production plan.     

A Genomics-Based Model for Prediction of Severe Bioprosthetic Mitral Valve Calcification

Severe bioprosthetic mitral valve calcification is a significant problem in cardiovascular surgery. Unfortunately, clinical markers did not demonstrate efficacy in prediction of severe bioprosthetic mitral valve calcification. Here, we examined whether a genomics-based approach is efficient in predicting the risk of severe bioprosthetic mitral valve calcification. A total of 124 consecutive Russian patients who underwent mitral valve replacement surgery were recruited. We investigated the associations of the inherited variation in innate immunity, lipid metabolism and calcium metabolism genes with severe bioprosthetic mitral valve calcification. Genotyping was conducted utilizing the TaqMan assay. Eight gene polymorphisms were significantly associated with severe bioprosthetic mitral valve calcification and were therefore included into stepwise logistic regression which identified male gender, the T/T genotype of the rs3775073 polymorphism within the TLR6 gene, the C/T genotype of the rs2229238 polymorphism within the IL6R gene, and the A/A genotype of the rs10455872 polymorphism within the LPA gene as independent predictors of severe bioprosthetic mitral valve calcification. The developed genomics-based model had fair predictive value with area under the receiver operating characteristic (ROC) curve of 0.73. In conclusion, our genomics-based approach is efficient for the prediction of severe bioprosthetic mitral valve calcification.