Toluene oxidation on Pd catalysts supported by CeO2–Y2O3 washcoated cordierite honeycomb

A novel CeO₂–Y₂O₃ (CY) washcoat on cordierite honeycomb was prepared by an impregnation method, which was used as a support to prepare a Pd catalyst. A model reaction of the complete combustion of toluene was conducted to evaluate the performance of the developed Pd/CY catalyst. The CY washcoat support and the Pd/CY catalyst were characterized by XRD, Raman spectroscopy, H₂-TPR and SEM techniques. The results show that compared with conventional washcoat the CY washcoat has better adhesion and higher vibration- and heat-resistance. The CY washcoat can anchor well Pd onto the cordierite honeycomb substrate. The formation of a CeO₂–Y₂O₃ solid solution and the steady present of PdO occur at high calcination temperatures, resulting in a better thermal stability. On a Pd/CY catalyst calcined at 500 °C, a 99% of toluene conversion was obtained at 210 °C, and it was stable for reaction time up to 30 h.     

Rheological and mechanical properties of PVC/CaCO3 nanocomposites prepared by in situ polymerization

Poly(vinyl chloride) (PVC)/calcium carbonate (CaCO₃) nanocomposites were synthesized by in situ polymerization of vinyl chloride (VC) in the presence of CaCO₃ nanoparticles. Their thermal, rheological and mechanical properties were evaluated by dynamic mechanical analysis (DMA), thermogravimetry analysis (TGA), capillary rheometry, tensile and impact fracture tests. The results showed that CaCO₃ nanoparticles were uniformly distributed in the PVC matrix during in situ polymerization of VC with 5.0 wt% or less nanoparticles. The glass transition and thermal decomposition temperatures of PVC phase in PVC/CaCO₃ nanocomposites are shifted toward higher temperatures by the restriction of CaCO₃ nanoparticles on the segmental and long-range chain mobility of the PVC phase. The nanocomposites showed shear thinning and power law behaviors. The ‘ball bearing’ effect of the spherical nanoparticles decreased the apparent viscosity of the PVC/CaCO₃ nanocomposite melts, and the viscosity sensitivity on shear rate of the PVC/CaCO₃ nanocomposite is higher than that of pristine PVC. Moreover, CaCO₃ nanoparticles stiffen and toughen PVC simultaneously, and optimal properties were achieved at 5 wt% of CaCO₃ nanoparticles in Young's modulus, tensile yield strength, elongation at break and Charpy notched impact energy. Detailed examinations of micro-failure micromechanisms of impact and tensile specimens showed that the CaCO₃ nanoparticles acted as stress raisers leading to debonding/voiding and deformation of the matrix material around the nanoparticles. These mechanisms also lead to impact toughening of the nanocomposites.     

Crystallization behavior of oxyethylene/oxybutylene diblock and triblock copolymers

The crystallization behavior of poly(oxyethylene)-b-poly(oxybutylene) block copolymers with different compositions, morphologies and architectures (E_mB_n diblock copolymers and E_mB_nE_m, B_nE_mB_n triblock copolymers) were investigated and the effect of volume fraction and architecture on the crystallization temperature (T_c) in non-isothermal crystallization was determined. It is found that the E_mB_n diblock copolymers having long E blocks exhibit similar crystallization temperatures, irrespective of volume fraction and morphology, but for the block copolymers with shorter E blocks the crystallization temperature increases with both the volume fraction, φ_E, and the length, m, of the E block. Some block copolymers with extremely low T_c, which fall into the temperature range normally associated with homogenous nucleation, were chosen for time-resolved small-angle X-ray scattering (SAXS) and isothermal crystallization kinetics experiments. The results show that breakout crystallization occurs in all these block copolymers. Therefore, unlike E_mB_n/B_h blends, there is no obvious relationship between T_c and crystallization behavior in neat block copolymers and homogeneous nucleation does not definitely lead to confined crystallization. The values of χ_c/χ_ODT for all the block copolymers with hex and bcc morphology were also calculated. It is found that all the block copolymers have χ_c/χ_ODT<3, in agreement with the previously reported critical value and consistent with their breakout crystallization behavior.     

Utilizing similarity relationships among existing data for high accuracy processing of content-based image retrieval

Retrieving similar images based on its visual content is an important yet difficult problem. We propose in this paper a new method to improve the accuracy of content-based image retrieval systems. Typically, given a query image, existing retrieval methods return a ranked list based on the similarity scores between the query and individual images in the database. Our method goes further by relying on an analysis of the underlying connections among individual images in the database to improve this list. Initially, we consider each image in the database as a query and use an existing baseline method to search for its likely similar images. Then, the database is modeled as a graph where images are nodes and connections among possibly similar images are edges. Next, we introduce an algorithm to split this graph into stronger subgraphs, based on our notion of graph’s strength, so that images in each subgraph are expected to be truly similar to each other. We create for each subgraph a structure called integrated image which contains the visual features of all images in the subgraph. At query time, we compute the similarity scores not only between the query and individual database images but also between the query and the integrated images. The final similarity score of a database image is computed based on both its individual score and the score of the integrated image that it belongs to. This leads effectively to a re-ranking of the retrieved images. We evaluate our method on a common image retrieval benchmark and demonstrate a significant improvement over the traditional bag-of-words retrieval model.     

Development and control of a new AUV platform

This paper presents an architecture of a newly developed autonomous underwater vehicle (AUV) platform, named KAUV-1, which is designed as a torpedo with very light weight and small size, suitable for use in marine exploration and monitoring. The KAUV-1 has a unique ducted propeller located at the aft end with yawing actuation acting as a rudder. For depth motion, the KAUV-1 is designed to have a mass shifter mechanism inside to change the vehicle center of gravity and to control its pitch angle and depth motion. The paper also presents an analysis on the equations of motion of the KAUV-1 with mass shifter mechanism and a new depth control strategy for the KAUV-1. The feasibility of the proposed control strategy is validated through simulation and experiment of performance of the vehicle.     

Micromechanical properties on the surface of PVC/SBR blends spatially resolved by a nanoindentation technique

The microhardness and micromodulus on the surface of poly(vinyl chloride) (PVC)/styrene‐butadiene rubber (SBR) blends were determined using a nanoindenter. A flat surface was obtained by microtoming the sample at ?100°C in liquid nitrogen. Dozens of indents along a line with a spatial interval of 0.5 μm were performed. From the loading and unloading curves of each indentation, the stiffnesses of the unloading curve and the contact area between the sample and the indenter were evaluated, and the local modulus and hardness were calculated. Profiles of the local hardness and modulus were obtained from the lines of indents. Pure PVC and a miscible PVC/acrylonitrile‐butadiene rubber (NBR) (40/10) blend showed constant modulus and hardness values. In the case of an immiscible PVC/SBR (50/50) blend, which has a morphology of elongated PVC droplets in the SBR matrix, the hardness and modulus profiles showed regions of the different phases. At the interface between the SBR and PVC phases, a step change in the modulus and hardness profiles was observed. The force required to deform the material at the same displacement increased systematically across the interface from the SBR to the PVC phase because of the increasing contribution of the PVC phase. Polym. Eng. Sci. 44:609–614, 2004. © 2004 Society of Plastics Engineers.     

丙烯酸和苯乙烯改性PP/PS结晶与熔融行为

制备了苯乙烯（St）、St与丙烯酸（AA）混合物、丙烯酸接枝聚丙烯（PP-g-AA）改性聚丙烯／聚苯乙烯（PP／PS）共混物以及AA，St改性PP（原位形成PP／PS共混物）。用差示扫描量热仪（DSC）研究了3种改性方法对共混物中PP结晶与熔融行为的影响。结果表明，PS对PP的结晶与熔融温度影响不大，PP-g-AA则提高共混物中PP的结晶温度。St以及St与AA混合单体对PP／PS中PP结晶温度影响不大，但AA改性提高PP／PS中PP结晶温度。St加入PP导致PP结晶温度下降，St与AA混合单体原位聚合则提高PP的结晶温度。改性对共混物中PP的熔融温度影响不大，但是熔融峰形与结晶温度高低有关。红外光谱证实St与AA混合单体改性PP中有PP-g-AA形成，但改性共混物中没有PP-g-AA形成。     

Interfacial interaction in AI(OH)3/polypropylene composites modified by insitu‐functionalized polypropylene

To investigate the interfacial interaction of AI(OH)₃/polypropylene (PP) composites modified by in situ‐functionalized polypropylene (FPP), AI(OH)₃/polypropylene (PP) composites containing a low AI(OH)₃ content, modified by in situ‐grafted acrylic acid, were prepared by a one‐step melt‐extrusion process. The effect of in situ FPP on the crystallization and melting behavior, crystalline morphology of the composites, and interfacial interaction between the filler and PP was investigated. The crystallization and melting behavior and crystalline morphology of PP in the composites depended upon the interfacial physical [heterogeneous nucleation of AI(OH)₃; cocrystallization and compabilitization of PP with in situ FPP] and the interfacial chemical interaction between both the components in the composites. FTIR results indicated that there exists a chemical reaction between AI(OH)₃ and in situ FPP. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 110–120, 2002; DOI 10.1002/app.10270     

Tensile deformation mechanisms of polypropylene/elastomer blends reinforced with short glass fiber

Polypropylene hybrid composites reinforced with short glass fiber (SGF) and toughened with styrene–ethylene butylenes–styrene (SEBS) elastomer were prepared using extrusion and injection‐molding techniques. Moreover, hybrids compatibilized with SEBS‐grafted maleic anhydride (SEBS‐g‐MA) and hybrid compatibilized with PP grafted with maleic anhydride (PP‐g‐MA) were also fabricated. The matrix of the latter hybrid was designated as mPP and consisted of 95% PP and 5% PP‐g‐MA. Tensile dilatometry was carried out to characterize the fracture mechanisms of hybrid composites. Dilatometric responses showed that the elastic deformation was the dominant deformation mechanism for the SGF/SEBS/PP and SGF/SEBS‐g‐MA/PP hybrids. However, cavitation deformation prevailed over shearing deformation for both hybrids at the higher strain regime. The cavitation strain resulted from the debonding of glass fibers and from the crazing of the matrix in the SGF/SEBS/PP hybrid. In contrast, the cavitation was caused by the debonding of SEBS particles from the matrix of the SGF/SEBS‐g‐MA/PP hybrid. The use of PP‐g‐MA resulting in elastic deformation was the main mode of deformation in the low‐strain region for the SGF/SEBS/mPP and SEBS/SEBS‐g‐MA/mPP hybrids; thereafter, shearing appeared to dominate at the higher strain regime. This was attributed to the MA functional group improving the bonding between the SGF and PP. The correlation between fracture morphology and dilatometric responses also is presented in the article. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 441–451, 2003     

由铁醇盐配合物制备纳米Fe_2O_3

50℃时,在无隔膜电解槽中采用电化学溶解铁金属8 h,制备了铁配合物Fe(OEt)2(acac)[acac-为乙酰丙酮基],通过红外光谱、拉曼光谱和核磁共振对配合物进行了表征.采用含Fe(OEt)2(acac)的电解液直接水解、干燥制备干凝胶,然后在450℃煅烧2 h,得到纳米Fe2O3粉体.通过透射电子显微镜(TEM)和X射线粉末衍射(XRD)对纳米Fe2O3进行表征.实验表明:前驱体中含有acac基团,可以很好地阻止水解与煅烧过程中发生团聚;所得干凝胶粒径在10 nm左右,纯度较高的纳米Fe2O3粉体粒径在20~30 nm.