Experimentelle und numerische Untersuchungen zum Tragverhalten von Stahlbetondecken mit kugelförmigen Hohlkörpern

Massive Flachdecken erweisen sich in Hoch‐ und Industriebau häufig als insgesamt überlegenes Deckensystem. Die hohe Eigenlast dieser Decken kann ihren Anwendungsbereich jedoch einschränken. Eine sinnvolle Abhilfe schafft dann die Integration von Hohlkörpern in der neutralen Zone, weil hierdurch eine spürbare Gewichtsreduktion eintritt. Neben der Eigenlast wird auch der Verbrauch der unter ökologischen Gesichtspunkten wesentlichen Ressourcen Betonstahl und Zement deutlich verringert. Die Hohlräume beeinflussen vor allem die Querkrafttragfähigkeit solcher Decken. Vier Versuchsserien, die mit kugelförmigen Hohlkörperdecken des Systems “cobiax” durchgeführt wurden, werden in diesem Beitrag beschrieben. Aus den Versuchen wird ein Abminderungsfaktor zur Beschreibung des Querkrafttragverhaltens abgeleitet, der auch in die kürzlich erteilte allgemeine bauaufsichtliche Zulassung des Deckensystems eingegangen ist. Die Nachrechnung der Versuche mit der Finite‐Elemente‐Methode zeigt eine gute Übereinstimmung von Numerik und Experiment, so dass in der Weiterentwicklung Parameterstudien auf dieser Grundlage zur Ergänzung von Versuchen hilfreich sein werden. Experimental and Numerical Investigation of the Bearing Behaviour of Hollow Core Slabs Massive flat slabs have proven to be the most appropriate ceiling system for structural and industrial engineering. However the high dead load of these slabs might reduce their field of application. This problem can be solved by void formers that are placed in the neutral zone. These block‐outs cause a noticeable reduction of weight. Furthermore, the masses of ecologically important resources like reinforcement steel and cement can be reduced as well. The shear bearing capacity is significantly influenced by these block‐outs. This article describes four test series with spherical void former floors of the system “cobiax”. A reduction factor for the shear bearing capacity is derived from these tests. That factor was also introduced in the technical approval for this slab system which has been issued recently. A comparison to a calculation with the finite element method shows that the numerical results and the results of the tests are quite similar. In future research, parameter studies based on the finite element method might be helpful additional to further tests.     

Relaxation processes and intermolecular interactions in PVME hydrogels in sub-zero temperatures: Glass transition and pre-melting of ice

The phase transition observed by various methods in poly(vinyl methyl ether)/water systems at around 18 °C has been assigned by some investigators to the pre-melting of water and by others to a glass transition of the polymer. In this study, broadband dielectric spectroscopy and temperature modulated differential scanning calorimetry were used to identify this transition in radiationally crosslinked poly(vinyl methyl ether) hydrogels, as well as to analyse sub-zero relaxation processes in such a three-phase (polymer/ice/liquid water) system. The process at 18 °C was related to the pre-melting of water induced by the segmental motions of the polymer; however, it was seen to be one transition due to the cooperative motions of both compounds. The atypical (two regimes) temperature dependence of the segmental motion process was observed and was related to confinement of the polymer chains between ice clusters below approximately ?24 °C; furthermore, the main dielectric process of hexagonal ice was identified and a Maxwell-Wagner effect was observed.     

A two-scale approach for trabecular bone microstructure modeling based on computational homogenization procedure

In this paper the numerical implementation of two-scale modelling of bone microstructure is presented. The study is a part of long-term project on bone remodelling which drives bone microstructure change based directly on trabeculae surface energy. The proposed approach is based on a first-order computational homogenization technique. The coincidence of macro- and micro-model kinematics is done with the use of uniform displacement and traction boundary conditions. The computational homogenization procedure is driven by a self-prepared manager which is coded in Python. The computation on real bone structure (a piece of female Wistar rat bone) is performed as well.     

Use of the higher spectra in the low-amplitude fatigue testing

Particular place among the methods of vibroacoustic diagnostics is occupied by the problems of early defect detection. Let us note that the process of defect formation may lead to both. The intensification of non-linear phenomena as well as the occurrence of non-stationary effects even if during the early stages the intensity of defects is small while the growth of the level of vibration and noise is negligible, as contrasted with emergency states. A useful method is to test the higher order spectra, which, respectively, define the non-linear effects. A test bed for low-amplitude tests (10⁶-10⁷ cycles) of fatigue processes was built. The authors built a small-dimension test bed for diagnosing the low-amplitude fatigue processes. Small dimensions result from the proposal of mounting the test bed on shaker. The dimensions of test bed are 0.2×0.2×0.2 m and its weight does not exceed 2 kg, with a titan head mounted directly on the piezoelectric generator. The main goal of these investigations is to examine the low-amplitude fatigue strength of a model of the cantilever supported section of a shaft and impact of dynamic stress, which is especially important in the case of high frequency loading which is predominant in mounting elements of rotating machinery.     

Investigations on printed elastic resistors containing carbon nanotubes

This paper presents the results of authors investigations on elaboration of a new thick film composition filled with carbon nanotubes (CNTs). The polymer composition consists of polymer vehicle, which is the solution of organic resin in certain combination of solvents, and functional phase—carbon nanotubes well dispersed in the vehicle. The pastes were applied with screen-printing on several substrates and temperature cured. The properties of obtained layers were characterized. Series of samples were prepared with different amount of CNTs to evaluate electrical properties. Changes in resistance were investigated during periodic mechanical and temperature stresses, realized through cyclical bending and rapid temperature change. Tensometric effect was also investigated. Investigations have proved that polymer composites based on carbon nanotubes exhibit high resilience to stress factors. Resistance change in function of temperature was also investigated to evaluate temperature coefficient of resistance (TCR). All this aspects are important for elastic resistors fabrication in printed electronics microcircuits. Resistance and noise measurements in cryostats have also been involved. 1/f type noise has been observed. Noise intensity, calculated in decade frequency bands, rises significantly with increasing temperature. Activation energies of thermally activated noise sources (TANS) have been revealed using low-frequency noise spectroscopy. Relatively large value of negative TCR has been obtained from resistance versus temperature curve. Calculated dimensionless sensitivity is similar to that observed in cryogenic temperature sensors. However, bulk noise intensity of resistive layer is larger than obtained for lead containing RuO₂ based resistive layers.     

An analysis of the causes of a BWE counterweight boom support fracture

A bucket wheel excavator (BWE) collapsed in a brown coal mine. As a result of a tie rod fracture the counterweight boom, the discharge boom and several other components of the other assemblies underwent plastic deformation. This paper presents the results of computer simulations of the collapse. A finite element method analysis of the counterweight boom tie rod showed stress concentrations exceeding the allowable level. Also material tests of the fracture surface were carried out to identify the causes of the collapse. Macroscopic and microscopic images of areas within the fracture were obtained. Measurements of hardness and microhardness in the vicinity of the weld were performed. The FEM analyses and material tests showed that the causes of the collapse were design and welding faults.     

The Potential of Asiatic Acid in the Reversion of Cyclophosphamide-Induced Hemorrhagic Cystitis in Rats

The purpose of this study was to determine if asiatic acid may act efficiently in the model of cyclophosphamide (CYP)-induced cystitis in rats. We performed experiments after administration of CYP (single dose 200 mg/kg, intraperitoneally), asiatic acid (30 mg/kg/day for 14 consecutive days, by oral gavage), or CYP plus asiatic acid, during which conscious cystometry, measurements of urothelium thickness and bladder edema, as well as selected biomarkers analyses were conducted. In rats that received asiatic acid together with CYP, a drop in bladder basal pressure, detrusor overactivity index, non-voiding contraction amplitude, non-voiding contraction frequency, and the area under the pressure curve were observed, when compared to the CYP group. Furthermore, a significant increase in threshold pressure, voided volume, intercontraction interval, bladder compliance, and volume threshold to elicit NVC were found in that group accordingly. Administration of the asiatic acid successfully restored concentrations of biomarkers both in bladder urothelium (BDNF, CGRP, OCT-3, IL-1β, IL-6, NGF, nitrotyrosine, malondialdehyde, TNF-α, SV2A, SNAP23, SNAP25, PAC-1, ORM1, occludin, IGFBP-3, HB-EGF, T–H protein, Z01, and HPX) and detrusor muscle (Rho kinase and VAChT) in CYP-treated rats. Finally, asiatic acid significantly decreased urothelium thickness and bladder oedema. Asiatic acid proved to be a potent and effective drug in the rat model of CYP-induced cystitis.     

Characterization of catalysts obtained from rapidly quenched alloy precursors by electrochemical/chemical processes of material degradation—selected examples

Rapidly quenched amorphous alloys—containing metallic or metalloid elements—are precursors for selective catalysts of many technically important reactions. To increase their activity, various methods of material degradation occurring at the surface and in the bulk of the rapidly quenched alloys have been used for promoting the catalytic performance of such materials. The modifications of the structure, composition, and morphology of the substrate proved to be efficient in transforming inactive metal alloy precursors into active and selective catalysts for hydrogenation, and dehydrogenation of organic compounds, as well as for other processes like steam reforming of methanol. This article presents several examples of characterization of such catalysts and discusses their selectivity and activity in a connection with physical and chemical properties of their surfaces. Moreover, it is shown that scanning electron microscopy, Auger electron spectroscopy, scanning Auger microscopy, and energy dispersive spectrometry allowed the local changes occurring during the activation process to be identified and their implications for catalytic function to be considered.