Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Tocopherol Content and Fatty Acid Distribution of Peas (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.)

The positional distribution of fatty acids (FA) of triacylglycerols (TAG) and major phospholipids (PL) prepared from four cultivars of peas (Pisum sativum L.) were investigated as well as their tocopherol contents. The lipids extracted from these peas were separated by thin-layer chromatography (TLC) into seven fractions. The major lipid components were PL (52.2–61.3%) and TAG (31.2–40.3%), while the other components were also present in minor proportions (5.6–9.2%). γ-Tocopherol was present in the highest concentration, and α- and δ-tocopherols were very small amounts. The main PL components isolated from the four cultivars were phosphatidylcholine (42.3–49.2%), followed by phosphatidylinositol (23.3–25.2%) and then phosphatidylethanolamine (17.7–20.5%). Small but significant differences (P < 0.05) in FA distribution existed when different pea cultivars were determined. However, the principal characteristics of the FA distribution in the TAG and the three PL were evident among the four cultivars; unsaturated FA were predominantly located in the sn-2 position, and saturated FA primary occupied the sn-1 or sn-3 position in the oils of the peas. These results suggest that the regional distribution of tocopherols and fatty acids in peas is not dependent on the climatic conditions and the soil characteristics of the cultivation areas during the growing season.     

A 950-MHz rectifier circuit for sensor network tags with 10-m distance

This paper presents a 950-MHz wireless power transmission system and a high-sensitivity rectifier circuit for ubiquitous sensor network tags. The wireless power transmission offers a battery-life-free sensor tag by recharging the output power of a base station into a secondary battery implemented with the tag. For realizing the system, a high-sensitivity rectifier with dynamic gate-drain biasing has been developed in a 0.3-/spl mu/m CMOS process. The measurement results show that the proposed rectifier can recharge a 1.2-V secondary battery over -14-dBm input RF power at a power conversion efficiency of 1.2%. In the proposed wireless system, this sensitivity corresponds to 10-m distance communication at 4-W output power from a base station.     

A 63-mW H.264/MPEG-4 audio/visual codec LSI with module-wise dynamic Voltage/frequency scaling

A single-chip H.264 and MPEG-4 audio-visual LSI for mobile applications including terrestrial digital broadcasting system (ISDB-T / DVB-H) with a module-wise, dynamic voltage/frequency scaling architecture is presented for the first time. This LSI can keep operating even during the voltage/frequency transition, so there is no performance overhead. It is realized through a dynamic deskewing system and an on-chip voltage regulator with slew rate control. By the combination with traditional low power techniques such as embedded DRAM and clock gating, it consumes only 63 mW in decoding QVGA H.264 video at 15 frames/sec and MPEG-4 AAC LC audio simultaneously.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

A Knowledge Discovery System with Support for Model Selection and Visualization

The process of knowledge discovery in databases consists of several steps that are iterative and interactive. In each application, to go through this process the user has to exploit different algorithms and their settings that usually yield multiple models. Model selection, that is, the selection of appropriate models or algorithms to achieve such models, requires meta-knowledge of algorithm/model and model performance metrics. Therefore, model selection is usually a difficult task for the user. We believe that simplifying the process of model selection for the user is crucial to the success of real-life knowledge discovery activities. As opposed to most related work that aims to automate model selection, in our view model selection is a semiautomatic process, requiring an effective collaboration between the user and the discovery system. For such a collaboration, our solution is to give the user the ability to try various alternatives and to compare competing models quantitatively by performance metrics, and qualitatively by effective visualization. This paper presents our research on model selection and visualization in the development of a knowledge discovery system called D2MS. The paper addresses the motivation of model selection in knowledge discovery and related work, gives an overview of D2MS, and describes its solution to model selection and visualization. It then presents the usefulness of D2MS model selection in two case studies of discovering medical knowledge in hospital data—on meningitis and stomach cancer—using three data mining methods of decision trees, conceptual clustering, and rule induction.     

An electrostatic microactuator using LIGA process for a magnetic head tracking system of hard disk drives

 We demonstrate an electrostatic micro actuator which is fabricated by LIGA process. The actuator is designed for a magnetic head tracking system of hard disk drives (HDDs). The actuator is essential to achieve very high track density of HDDs. We realize the aspect ratio of 125 by the LIGA process using a Si-Au mask. We propose to use PMMA molds both as the mechanical structure and as the insulator between electrodes. We believe there are great opportunity for the LIGA process in making micro actuators of HDDs. Received: 25 August 1997 / Accepted: 24 October 1997     

Development of an Autonomous Quadruped Robot for Robot Entertainment

In this paper, we present Robot Entertainment as a new field of the entertainment industry using autonomous robots. For feasibility studies of Robot Entertainment, we have developed an autonomous quadruped robot, named MUTANT, as a pet-type robot. It has four legs, each of which has three degree-of-freedom, and a head which also has three degree-of-freedom. Micro camera, stereo microphone, touch sensors, and other sensor systems are coupled with newly developed behavior generation system, which has emotion module as its major components, and generates high complex and interactive behaviors. Agent architecture, real-world recognition technologies, software component technology, and some dedicated devices such as Micro Camera Unit, were developed and tested for this purpose. From the lessons learned from the development of MUTANT, we refined the design concept of MUTANT to derive requirements for a general architecture and a set of interfaces of robot systems for entertainment applications. Through these feasibility studies, we consider entertainment applications a significant target at this moment from both scientific and engineering points of view.     

Legacy system program transformation by Lyee methodology

Based on the comparative review of several approaches to legacy system conversion and revitalization, the Lyee methodology application for the issue is presented to clarify its idea, the associated procedure, and the implemented tools. It could be said that with the tools and manual developed by ICBSM&T, the mechanical transformation of the conventional program to a Lyee-structured one becomes possible as long as the programs are made in a procedure-oriented language. In addition to the program structure conversion, the Lyee methodology permits people to choose any application language in the transformed program. At the same time, quite a new approach related to the system conversion is introduced, in which the chunk of data extracted from an old program is edited to make a new conventional structure program that has a logical sequence instead of a Lyee type of declarative program. These features can be realized through the concept of LyeeBELT, which is a set of word-information about the attributes, formulae, and conditions for an independent data item.

The overall workflow of the legacy program transformation is shown in the following.

A critical part in its implementation is the feasibility study (pre-analysis) stage where necessary information is supposed to be secured, and an appropriate plan and policy about the system to be revitalized in the new system environment should be clarified so as to customize the tools accordingly. If the initial process is completed, the mechanical legacy system conversion will be realized by registering the parameters in the tool, and the reestablishment of business knowledge in the LyeeBELT will be enabled. With the regulated business logic on the LyeeBELT, the program maintenance afterwards becomes drastically simplified and stable without the ‘spaghetti’ problem, so that software evolution can be possible.