A stochastic model for localized disturbances and its applications

A stochastic model for local disturbances, particularly for a temporal harmonic with random modulations in amplitude and/or phase, is proposed in this paper. Results for the second moment responses of a linear single-degree-of-freedom system to this type of stochastic loading demonstrate a significant change in response characteristics due to a small uncertainty. A local phenomenon may last much longer and resonance may be smeared to a broad range. Integrated with wavelet transform, the proposed approach may be used to model a random process with non-stationary frequency content. Especially, it can be effectively used for Monte Carlo simulation to generate large size of samples that have similar characteristics in time and frequency domains as a pre-selected mother sample has. The technique has a great potential for the case where uncertainty study is warranted but the available samples are limited.     

Iodo-2'-deoxyuridine (IUdR) and 125IUdR loaded biodegradable microspheres for controlled delivery to the brain

The aim of this work was to develop sustained local release systems for radioiodinated iodo-2'-deoxyuridine (125IUdR) from biodegradable polymeric microspheres to facilitate the controlled delivery of 125IUdR to brain tumours. The selective uptake of IUdR into the cell nucleus results in cell disruption over the short range of the low energy Auger electrons. The biodegradable microspheres can be precisely implanted in the brain by stereotactic techniques and the IUdR within the microspheres is protected from degradation and thus a sustained source of radiolabelled IUdR is available in the vicinity of the residual tumour cells. Poly(lactic-co-glycolic acid), PLGA (85:15), microspheres containing cold IUdR and the Auger-electron emitter 125I, as 125IUdR were prepared using the O/W, O/O and W/O/W emulsion-solvent evaporation methods. The W/O/W emulsion method was most effective in achieving good drug loading with the use of bovine plasma in the internal water phase. Also effective in improving the drug loading was the use of 20% acetone in the dichloromethane and the presence of Span 40 in the organic phase. Electrolytes (NaCl and IUdR) in the external aqueous phase also improved drug loading. After an initial rapid release from the microspheres, a sustained release was observed over 15 days for the 'cold' IUdR. The sustained release portions of the release curves showed Higuchi (t1/2), diffusion controlled release kinetics. The radiolabelled IUdR microspheres showed a burst release effect of 30-40% followed by a sustained release over 35 days.     

A New Criteria Decision Applied on the Primary Synchronization in the DS-WCDMA Interface of the UMTS System

In DS-WCDMA mobile systems such the UMTS, asynchronous cell site operation,assigning different long spreading code to each cell, yields the advantageof flexible system deployment. We can design an indoor system basedon an outdoor one. However, in general, much longer search time isrequired in asynchronous operation than in synchronous. This paperproposes three techniques to take decisions about synchronizationbased on observation of correlated signals. Classical decision criterialike maximum and threshold criterion are presented. A new decisioncriteria that we call Threshold&Max combined decision criteriais analyzed. The results of this new introduced technique is comparedwith the classical ones.     

Preparation and properties of novel polyurethane insulating coatings based on glycerin‐terminated urethane prepolymers and blocked isocyanate

Novel polyurethane insulating coatings were prepared from the reaction of glycerin‐terminated polyurethane prepolymers (GPUPs) and a blocked isocyanate curing agent (BIC). The GPUPs were prepared from the reaction of one equivalent of polycaprolactone polyol (CAPA 210) with an excess amount of 4,4′‐methylene bis(phenyl isocyanate) (MDI) and subsequent reaction of the NCO‐terminated polyurethane with glycerin. The BIC was prepared from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). The polyols and curing agent were characterized by conventional methods while the curing condition was optimized via gel content measurements. The curing kinetics of the polyurethane coating were investigated and the kinetic parameters derived. The crosslink densities of the samples were determined via the equilibrium swelling method, using the Flory–Rehner equation. The relationships between the crosslink density and the electrical, physical, mechanical and dynamic mechanical properties of the coatings were also studied. Copyright © 2005 Society of Chemical Industry     

Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

Determination of vitality from a non-invasive biomedical measurement for use in fingerprint scanners

Fingerprints are the oldest and most widely used biometrics for personal identification. Unfortunately, it is usually possible to deceive automatic fingerprint identification systems by presenting a well-duplicated synthetic or dismembered finger. This paper introduces one method to provide fingerprint vitality authentication in order to solve this problem. Detection of a perspiration pattern over the fingertip skin identifies the vitality of a fingerprint. Mapping the two-dimensional fingerprint images into one-dimensional signals, two ensembles of measures, namely static and dynamic measures, are derived for classification. Static patterns as well as temporal changes in dielectric mosaic structure of the skin, caused by perspiration, demonstrate themselves in these signals. Using these measures, this algorithm quantifies the sweating pattern and makes a final decision about vitality of the fingerprint by a neural network trained by examples.     

Computerized facility layout design

The paper describes a computerized facility layout designer, COMLAD II, for plant layout development. Besides developing an efficient layout, COMLAD II has useful features which allow fixing the departments, changing the shape of the departments and changing the length and width dimensions of the overall layout.     

A New Image Analysis Based Method for Measuring Electrospun Nanofiber Diameter

In this paper, a new image analysis based method for electrospun nanofiber diameter measurement has been presented. The method was tested by a simulated image with known characteristics and a real web. Mean (M) and standard deviation (STD) of fiber diameter obtained using this method for the simulated image were 15.02 and 4.80 pixels respectively, compared to the true values of 15.35 and 4.47 pixels. For the real web, applying the method resulted in M and STD of 324 and 50.4 nm which are extremely close to the values of 319 and 42 nm obtained using manual method. The results show that this approach is successful in making fast, accurate automated measurements of electrospun fiber diameters.     

Framework Model for Asset Maintenance Management

This paper presents the development of a generic framework for asset maintenance management. The framework has been presented in the form of an IDEF0 process model. The process model served to illustrate the interaction and dependencies among a diverse set of knowledge areas. In this framework, outputs from one management process become inputs to another in a subsequent hierarchy. The structure of the framework model exhibited the characteristics of flexibility and robustness. Updates in knowledge can be accommodated within the framework through incorporating new management processes and/or activities, as well as establishing new sequencing logic for these processes and/or activities. In a supporting effort to the development of the framework model, the writers have objectively reviewed the general capabilities of three commercially available software applications that are known within the asset management (AM) industry. These three applications, while encompassing a wide selection of capabilities, represent a typical selection of information technology (IT) tools and techniques that are widely used in strategic AM practices. The objective of this review is to study the operational characteristics and functionalities, and to assess the capability of software interoperability, of a representative sample of IT tools known within the AM industry.