无润滑空气压缩机冷却水系统的清洗

介绍了无润滑空气压缩机冷却水系统结垢的危害性，阐述了清洗的原理，提出了清洗时应注意的工艺参数，操作时的注意事项和由此带来的经济效益。     

金属闪光外墙乳胶漆的研制及性能研究

以丙烯酸酯及有机硅单体为原料合成了核-壳型硅丙乳液,用自制分散剂将闪光铝粉分散成水性闪光铝粉浆,并成功分散于硅丙乳液中,加入进口助剂,配制成水性金属闪光外墙乳胶漆.讨论了基料的玻璃化温度、单体的加入方式、引发剂、乳化剂、反应温度、聚合工艺和pH等对乳胶漆性能的影响.     

Lymphatic transport in rats of interesterified oils containing conjugated linoleic acids

In this study we examined the lymphatic transport in rats of FA after administration of interesterified oils containing CLA, with emphasis on the location of CLA and octanoic acid in the TAG. The oils were produced by enzymatic interesterification. Eight oils with different structures or FA profiles were examined in this study: MCM, CMC, OCO, and COC, where M was expected to be octanoic acid and O oleic acid. In group 1, C was CLA as a mixture of the two CLA isomers c9, t11 or t10, c12, and in group 2, C was mainly the isomer t10, c12. Rats were subjected to cannulation of the mesenteric lymph duct, and the following day they were intragastrically administered one of the oils and lymph samples were collected for 24 h. The lymphatic transport of total FA from 0 to 8 h in group 1 was significantly (P < 0.05) higher for the OCO-1 and the COC-1 oils than for the CMC-1 oil. Similarly, in group 2 the transport was higher for the OCO-2 oil than for the CMC-2 oil. The recovery of both of the CLA isomers examined was similar (50-70%) and independent of the isomer, oil structure, and FA profile, whereas more octanoic acid was recovered from the CMC oils than from the MCM oils. The results indicated that the FA profiles and the position of octanoic acid had only a minor influence on the absorption of CLA.     

Leave-one-out cross-validation-based model selection for multi-input multi-output support vector machine

As an effective approach for multi-input multi-output regression estimation problems, a multi-dimensional support vector regression (SVR), named M-SVR, is generally capable of obtaining better predictions than applying a conventional support vector machine (SVM) independently for each output dimension. However, although there are many generalization error bounds for conventional SVMs, all of them cannot be directly applied to M-SVR. In this paper, a new leave-one-out (LOO) error estimate for M-SVR is derived firstly through a virtual LOO cross-validation procedure. This LOO error estimate can be straightway calculated once a training process ended with less computational complexity than traditional LOO method. Based on this LOO estimate, a new model selection methods for M-SVR based on multi-objective optimization strategy is further proposed in this paper. Experiments on toy noisy function regression and practical engineering data set, that is, dynamic load identification on cylinder vibration system, are both conducted, demonstrating comparable results of the proposed method in terms of generalization performance and computational cost.     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

烟气脱硫的发展、技术与产业化探讨

回顾了我国烟气脱硫的发展历程 ,总结了我国烟气脱硫产业化方面取得的成绩和存在的问题 ,介绍了国际上烟气脱硫发展的基本情况     

密炼机转子铜瓦椭圆的修复方法

简要介绍了一种XHM253/20密闭式炼胶机转子铜瓦椭圆的修复方法.该方法简便易行,修复工期短,修复质量高,在实际工作中具有一定参考价值.     

有机-无机杂化材料制备质子交换膜的研究进展

综述了近年来采用有机-无机杂化材料制备质子交换膜的研究进展，重点介绍了由掺入了质子导电单元或经过磺化的有机-无机杂化材料制得的质子交换膜及由带磺酸基的有机硅通过溶胶-凝胶工艺制备的有机-无机杂化质子材料制得的交换膜，并从制备方法出发分析了每种质子交换膜的性能。     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.