浅谈我国电信企业信息化策略

我国电信企业要做大做强，信息化是必然的战略选择和有效的助力器。本文阐述了电信企业信息化的含义、现状，描绘了电信企业信息化的目标，从经济学、管理学、行为科学等学科的角度提出了我国电信企业信息化策略。     

高峰值功率重频脉冲固体激光器

综述了高峰值功率重频脉冲固体激光器的发展现状，对其中的Ｑ开关、腔倒空、锁模等窄脉冲技术和放大技术进行了分析，展示了高峰值功率重频脉冲固体激光器的发展前景。     

GaAlInP发光材料计算的经验公式

根据已经发表的实验数据，针对镓铝铟磷发光材料的提出了一组经验公式及相应的曲线，作为ＧａＡｌＩｎＰ可见光材料设计的依据或参考。     

氮对纳米硅氮薄膜品化的影响

在电容式耦合等离子体化学气相沉积系统中，用高氢稀释硅烷和氮气为反应气氛制备纳米硅氮（ｎｃ－ＳｉＮｘ：Ｈ）薄膜结果表明：当Ｎ＿２／ＳｉＨ＿４气体流量比（Ｘｎ）从１增加为４时，薄膜的晶态年从５８％降至１４％，晶粒尺寸从１０ｎｍ降至５ｕｍ，Ｎ／Ｓｉ含量比从０．０３增至０．１２．当Ｘｎ≥５，则生成非晶硅氮（ａ－ＳｉＮｘ：Ｈ）薄膜．当Ｘｎ从１增加为１０时，薄膜暗电导率从１０￣（－５）（Ωｃｍ）￣（－１）降至１０￣（－１１）（Ωｃｍ）￣（－１），具有逾渗行为，这与薄膜的晶态率紧密相关．     

Failure probability evaluation for normally distributed load-strength model with unknown parameters

The failure probability evaluation methods for load-strength interference model are established when both load, L, and strength, S, follow normal distributions, assuming none of the normal distribution parameters are known. Based on Fisher's fiducial analysis, a failure probability evaluation method is obtained for single load application. A numerical integration method is developed to evaluate the failure probability for multiple load applications.     

Accurate estimation of environment parameters from ultrasonic data

This paper describes a robust and accurate ultrasonic sensing system for a mobile robot. The system continuously updates a local map of the environment in which obstacles are represented by straight lines or points in a robot centered coordinate frame. The presented algorithms use a Kalman filter for the reduction of the noise in the ultrasonic data and use a systematical error correction (‘bundle correction’) to reduce the uncertainty in obstacle direction. Experiments are carried out in simulation and with a real mobile robot system. Results show that the accuracy with which line parameters can be estimated is in the order of 1 degree for the orientation and about 2 cm for the position. The effect of the bundle correction is significant and maximal when the robot approaches walls under a small angle.     

有自聚焦功能的付里叶计算全息

在制作付里叶计算全息过程中，加入适当的二次位相因子，使此种全息图在相干光照明下就可预定的位置上只再现一个像，省略了过去丙现此种计算全息图必要的付里叶透镜，并且使两个互为共轭像分离，从而拓宽了此种计算全息的应用领域，实验结果与理论分析相符。     

Statistical computer-aided design for microwave circuits

A useful methodology for microwave circuit design is presented. A statistical technique known as Design of Experiments is used in conjunction with computer-aided design (CAD) tools to obtain simple mathematical expressions for circuit responses. The response models can then be used to quantify response trade-offs, optimize designs, and minimize circuit variations. The use of this methodology puts the designer's intelligence back into design optimization while making “designing for circuit manufacturability” a more systematic and straightforward process. The method improves the design process, circuit performance, and manufacturability. Two design examples are presented in context to the new design methodology     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

设置保水堰管涵输水系统的水力瞬变数值仿真

为研究大型调水工程的水力瞬变过程，采用明渠非恒定流方程及Preissiman方法模拟无压管涵非恒定流、有压管涵水击和明满交替流，提出了设置保水堰的长距离管涵输水系统的水力学仿真模型。所建立的数值模型可模拟包括管涵明满交替和保水堰跌水等复杂的水流现象。数值仿真结果表明，在检修闸门和下游管涵之间设置保水堰，可以调节输水管道内的压力，避免紧急启闭时发生液柱分离以及检修闸门突然关闭时因明满流交替而产生强烈的冲击水压。