Effect of polyethyleneimine-fatty acid complex type dispersant structure on the overall processing chain of Si3N4 ceramics using multicomponent non-aqueous slurries

The effect of fatty acid structure of polyethyleneimine (PEI)-fatty acid complex, which was designed as a polymer dispersant for multi-component non-aqueous slurries, on the overall processing chain of Si₃N₄ ceramics involving slurry stabilization, spray drying, compaction, and liquid sintering was investigated using PEI-oleic acid (PEI-OA) and PEI-isostearic (PEI-ISA) complexes. Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries were selected as a real model for Si₃N₄-based multicomponent slurries. It was observed that both PEI-OA and PEI-ISA can stabilize Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries; however, the PEI-ISA system tended to have slightly higher slurry viscosity, which was suspected to be due to the interactions between protruded PEI segments among short ISA chains. The spray-dried granules from PEI-ISA-stabilized slurry were observed to have filled structures with higher surface roughness whereas those prepared from PEI-OA-stabilized slurry were observed to have hollow-structured granules. The granules prepared from PEI-OA slurry had improved flow and compaction properties with higher relative density of green compacts compared with those prepared from PEI-ISA-stabilized slurry, whereas the relative density and microstructural homogeneity of S₃N₄ ceramics sintered at 1600?°C for 2?h were observed to be higher for the PEI-ISA system. It is suspected that PEI-OA effectively improved the dispersion stability of multicomponent slurries and flow/compaction properties of granules; however, the inhomogeneous microstructures of green compacts induced by the hollow-structured granules had an adverse effect on the sintering of Si₃N₄ ceramics.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

Travel Time Reliability in Vehicle Routing and Scheduling with Time Windows

This paper presents calibration of the Vehicle Routing and scheduling Problems with Time Windows-Probabilistic (VRPTW-P) model which takes into account the uncertainty of travel times. Probe vehicle data of travel times were obtained from usual operation of pickup-delivery trucks in South Osaka area. The optimal solution of the VRPTW-P model resulted in reducing total cost, running times and CO₂, NOx and Particle Materials (PM) emissions compared with the usual operation. This is attributed to better routing of VRPTW-P to choose more reliable roads. Therefore, VRPTW-P can contribute to establish efficient and environmentally friendly delivery systems in urban area.     

Novel Phase Transition in BaPr2Mn2O7

The rare earth manganite BaLn2Mn2O7 (Ln=rare earth element) has a Sr3Ti2O7-type layered perovskite structure with double-block oxygen octahedra belonging to the Ruddlesden-Popper-type homologous series AO(ABO3)2. In Pr-manganite, a novel phase transition was first observed in situ at 1040 K by a thermal transmission electron microscope. At 1040 K, reflections began to split along the c-direction in the selected area diffraction pattern. This indicates that a new phase appears in the original phase matrix; the c length of the new phase is 1.5% longer than that of the original phase. After about 5 min, the original phase disappears. No change in the crystal symmetry (space group I4/mmm) is observed above 1040 K.     

Basic design of 70-MW-class superconducting generators

The application of superconductivity technology to electric power apparatus is very important from the viewpoint of energy saving. Especially, the superconducting generators using superconductors as the field windings have many merits compared with conventional generators. Super-GM has been researching and developing 70-MW-class model machines since FY 1988 for a scheduled period of eight years, aiming at a 200-MW-class superconducting generator. This paper describes the basic specifications and designs of 70-MW-class superconducting generators by Super-GM and also describes the propriety of these basic specifications and designs.     

Structures of spider toxins: hydroxyindole-3-acetylpolyamines and a new generalized structure of type-E compounds obtained from the venom of the Joro spider, Nephila clavata

Facile structure determination of acylpolyamines, glutamatergic nerve blocker obtained from the venom of the Joro spider (Nephila clavata) was carried out with the use of micro-column LC/MS and high energy collision induced dissociation (CID) mass spectrometry. 6-hydroxyindole-3-acetyl was proposed previously as a putative partial structure, for the acyl moiety of hydroxyindole-type polyamines (NPTX-1 to -6). The NMR data obtained for NPTX-6, NPTX-687 and hydroxyindole-3-acetic acid which was released by acid hydrolysis of Nephila clavata crude venom extracts proved that the lipophilic head is the 4-hydroxyindole-3-acetic acid. Various hydroxyindole-3-acetyl polyamines were found in N. Clavata venom and characterized by mass spectrometry. As a result, type-E, a new class of generalized acylpolyamine structure was proposed in addition to the previously reported polyamine backbones type-A to -D.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

Analysis of fumonisin B1 and B2 in beer and raw materials of beer by liquid chromatography/tandem mass spectrometry

A simple method for analysis of fumonisin B1 (FB1) and fumonisin B2 (FB2) in beer and raw materials of beer using liquid chromatography-electrospray ionization tandem mass spectrometry (LC/MS/MS) was developed. Samples were prepared and purified by using solid-phase extraction columns (SAX). The LC separation was performed with an octadecylated silica column at a flow-rate of 0.2 mL/min, using a mobile phase consisting of water and acetonitrile. MS/MS was used in multiple reaction monitoring, employing electrospray ionization (ESI-MRM). Recoveries of spiked FB1 and FB2 from beer were 64% and 52%, respectively, at the level of 5 microg/kg. Recoveries of spiked FB1 and FB2 from malt, cornstarch, and corn grit, at the level of 50 microg/kg, were 87.9% and 86.4%, 89.5% and 87.9%, 86.6% and 81.1%, respectively. This method may have applications in quality assurance.