Fraunhofer Diffraction by Koch Fractals: The Dimensionality

Abstract

Some properties concerning the fractal dimension of generalized Koch fractals and their Fraunhofer diffraction patterns are investigated as a continuation of the previous paper by Uozumi et al. The methods are discussed for evaluating the fractal dimension of object fractals from the intensity distribution of their diffraction patterns. Experimental results are shown to demonstrate some properties in this context. The fractal dimension of fractal areas in the Fraunhofer diffraction patterns is also considered.     

A low-resistance self-aligned T-shaped gate for high-performancesub-0.1-μm CMOS

This paper describes the high performance of T-shaped-gate CMOS devices with effective channel lengths in the sub-0.1-μm region. These devices were fabricated by using selective W growth, which allows low-resistance gates smaller than 0.1 μm to be made without requiring fine lithography alignment. We used counter-doping to scale down the threshold voltage while still maintaining acceptable short-channel effects. This approach allowed us to make ring oscillators with a gate-delay time as short as 21 ps at 2 V with a gate length of 0.15 μm. Furthermore, we experimentally show that the high circuit speed of a sub-0.1-μm gate length CMOS device is mainly due to the PMOS device performance, especially in terms of its drivability     

A low-impedance open-bitline array for multigigabit DRAM

The noise-generating mechanisms inherent in the open-bitline DRAM array using the 6F² (F: feature size) memory cells and techniques for reducing the noise are described. The sources of differential noise coupled to the paired bitlines laid out in two arrays are the p-well, cell plate, and the group of nonselected wordlines. It was found, by simulation and by experiment with a 0.13-μm 256-Mb test chip, that the level of noise is dramatically reduced by using a low-impedance array with careful layout featuring low-resistivity materials, tight bridging between pairs of adjacent arrays, and a small array, achieving a comparable level of noise to that seen in the twisted and folded-bitline array. On basis of these results, it turns out that the open-bitline array has a strong chance of revival in the multigigabit generation, as long as these noise reduction techniques are applied     

Resistances to UV-C irradiation of Salmonella Typhimurium and Staphylococcus aureus in wet and dried suspensions on surface with egg residues

To clarify the effects of food sediments on ultraviolet-C (254 nm) sanitation in food-related environments, we examined the resistance of pathogenic bacteria (Salmonella Typhimurium and Staphylococcus aureus) cells, in wet and dried suspensions adhered with 1.5-15% w/v egg albumen, 1.5-15% yolk or 3.0-30% whole egg solutions, against UV-C irradiation. Bacterial suspensions (0.1 ml of 8 log CFU/ml) were put on 47 mmφ glass dishes and dried at room temperature (20-24 °C) for 180 min in a bio safety cabinet with ventilation. Viable S. Typhimurium and S. aureus cells in distilled water decreased during the drying period from 7.2 to 3.2 and from 8.0 to 6.5 log CFU/dish, respectively,. On the other hand, the bacteria cells were protected from drying by egg compounds, even by the lowest concentration. The UV-C treatment (0.16 mW/cm² for 10 min) showed a clear bactericidal effect in the absence of egg compounds. However, the bactericidal effect was inhibited by 15% yolk and 30% whole egg. Results in this study suggested that the small food sediment protect bacteria on the surfaces from dryness and UV-C irradiation and it might introduce cross contamination.     

SoI--gel modification of pH electrode glass membranes for sensing anions and metal ions

To obtain glass membrane electrodes selective for anions and metal ions, pH electrode glass membranes were modified by a sol-gel method using a quaternary ammonium salt and a bis(crown ether). A chloride ion-sensing glass membrane was designed, in which a pH electrode glass membrane was modified chemically by an alkoxysilyl quaternary ammonium chloride. X-ray photoelectron spectroscopy confirmed the chemical bonding of the quaternary ammonium moiety to the starting glass surface, which afforded the first example of glass-based "anion"-sensing membranes. A neutral carrier-type sodium ion-selective glass membrane was also fabricated which encapsulates a bis(12-crown-4) derivative in its sol-gel-derived surface. Both sol-gel-modified anion and metal ion-selective glass electrodes exhibited high sensitivity to their ion activity changes. The present sol-gel modification paves the way for designing glass-based ion sensors with tailor-made ion selectivities toward anions as well as cations.     

Broadband Tuning of a Continuous-Wave, Doubly Resonant, Lithium Triborate Optical Parametric Oscillator from 791 to 1620 nm

We report the use of extreme broadband, high reflectivity >99.5%, optical parametric oscillator (OPO) cavity mirrors. A continuous-wave, doubly resonant, OPO demonstrated tuning over a range of 791-1620 nm with a single mirror set. Wavelength tuning was performed by temperature tuning the nonlinear material of lithium triborate. Narrow linewidth oscillation was confirmed throughout the tuning range, and threshold pump power increased gradually from 50 mW near the degeneracy to 800 mW at the tuning band edge in a double-pass pumping configuration.     

High density recording with perpendicular Co-Cr-Nb media and ring heads

Effective double layer structure was investigated by adding Nb to the sputtering source of Co-Cr thin film perpendicular magnetic recording tapes. The output from the tapes was measured with a ring head through to the short wavelength, λ50=0.19 μm (D50=267KFRPI).     

Development and applications of an analytical electron microscope with a field emission electron gun

An analytical electron microscope with a field emission electron gun has been developed in order to improve the function of material identification, in order to obtain higher resolution of images, sharper electron diffraction patterns, and purer x-ray spectra with no effects of contamination from smaller areas than in the conventional instruments so far utilized. The performance capabilities of this newly developed analytical electron microscope, the Model H-600FE, have been examined and found to be very useful for the material characterization of nanometer-size areas. Various attributes of the microscope became apparent with reference to the results of different studies. These include better convergence of the electron beam (demonstrated by examination of an MoS₂ thin film), high-resolution transmission electron microscopy (using a gold film), high-resolution scanning electron microscopy (with a carbon film containing nanometer-size holes), high-angle resolution electron diffraction (of an iron carbide film), and precision x-ray analysis of nanometer-size areas (using a pyroxene crystal and a Cu---Zn---Al shape memory alloy).     

Analyses of reactor building by 3D nonlinear FEM models considering basemat uplift for simultaneous horizontal and vertical ground motions

The nonlinear behavior of basemat uplift, which is an important point in seismic designs of nuclear power plants in Japan, has been investigated by arranging joint elements between the reactor building basemat and the soil on a three-dimensional (hereafter referred to as 3D) FEM model of the soil. However, the nonlinearity of the basemat uplift has been investigated separately from the nonlinearity of reactor buildings. These nonlinearities have yet to be taken into account simultaneously in past studies. In this paper, models of the building and the soil using 3D FEM elements with consideration to the nonlinearity of building materials as well as the nonlinearity of the basemat uplift were subjected. The behavior of the building's elements were investigated by carrying out seismic response analyses for horizontal ground motions only, as well as for simultaneous horizontal and vertical ground motions using these models. As a result, it was found that there was little difference in the horizontal response of the building between the horizontal input motions only and the simultaneous horizontal and vertical input motions. The effects of the vertical ground motions on the basemat uplift behavior which is represented by the ground contact ratio were also slight.