Synthesis and Characterization of Al-MCM-41 and Al-MCM-48 Mesoporous Materials

A novel route in the synthesis of Al-MCM-41 and Al-MCM-48, using tetraethoxysilane (TEOS) and sodium aluminate (NaAlO₂) as Si and Al source has been obtained. The effect of surfactant nature and the synthesis conditions such as surfactant/Si ratio and hydrothermal treatment time on the formed mesostructure regularity has been studied. Different methods of template removal have also been evaluated. The samples were characterized by X-ray diffraction, nitrogen physisorption, FT-IR, and solid-state MAS NMR spectroscopy.     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Manipulating the microstructure and rheology in polymer‐organoclay composites

A series of nanocomposites prepared by melt‐blending of cloisite‐based organoclays with poly(ethylene‐vinylacetate) (EVA) and neutralized poly (ethylene‐methacrylic acid) (EMA) copolymers were investigated via DSC, small‐angle X‐ray scattering (SAXS), and rheological techniques. SAXS results indicated partial clay exfoliation in all samples. In both EMA and EVA systems, the nominal melting temperature T_m and bulk crystallinity are not significantly affected by the presence of organoclays, suggesting that clay particles are predominantly confined in the amorphous phase. In rheological measurements (above T_m), the EVA‐clay system demonstrated a solid‐like rheological behavior under the small‐strain oscillatory shear, yet it was able to yield and flow under a steady shear, which is the characteristic of physical crosslinking. In contrast, the EMA‐clay system exhibited a melt‐like rheological behavior, where the influence of organoclay on the thermorheological behavior of the EMA composite was quite minimal. We propose that the carbonyl groups of vinylacetate in EVA interact with the clay surface, resulting in a strong physically crosslinking like interaction in the melt. On the other hand, the interaction between EMA and clay is weak because of repulsion between carboxyl anions and negatively charged clay surface.     

Electron spin resonance studies of interactions of ammonia,copper, and cupriammonia with cellulose

The electron spin resonance spectra (ESR) of complexes of copper with fibrous cotton cellulose under various experimental conditions were determined. Cupric ions dissolved in solutions of strong bases, such as concentrated ammonium hydroxide, sodium hydroxide, and potassium hydroxide, formed complexes with fibrous cotton cellulose. These complexes had paramagnetic resonance properties and generated characteristic ESR spectra. Cupric ions dissolved in solutions of highly ionized neutral salts, such as sodium chloride, formed complexes with cellulose. These complexes also generated the same characteristic ESR spectra as the complexes formed in solutions of strong base. The reaction between cupric ions and cellulose was evidently very rapid and reversible. When the concentration of ammonia was decreased in, or ammonia was removed from, the cupric ion–ammonium hydroxide–cellulose complexes, the paramagnetic resonance properties of the complex were decreased or lost. Similar results were received when potassium hydroxide was removed from the complexes. The compositions of the complexes evidently are variable, that is, under different experimental conditions the relative intensities of the lines of the ESR spectra of the complexes varied, although the hyperfine splittings of the lines were constant. It was concluded that reactions of cupric ions to form complexes with adjacent hydroxyl groups on the cellulose molecule depended on an optimum spatial arrangement of the hydroxyl groups, that is, distance between the groups. Evidently, wetting of cotton cellulosic fibers with solutions of strong bases or neutral salt allowed rotation about the C₂–C₃ bond to yield this optimum arrangement. When the base or salt was removed, rotation occurred to give less favorable positions of the hydroxyl groups for complexing with cupric ions.     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Acceleration or retardation to crystallization if liquid-liquid phase separation occurs: Studies on a polyolefin blend by SAXS/WAXD, DSC and TEM

Blends of statistical copolymers containing ethylene/hexene (PEH) and ethylene/butene (PEB) exhibited the behavior of upper critical solution temperature (UCST). The interplay between the early and intermediate stage liquid-liquid phase separation (LLPS) and crystallization of the PEH/PEB 50/50 blend was studied by time-resolved simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) techniques. Samples were treated by two different quench procedures: in single quench, the sample was directly quenched from 160 °C to isothermal crystallization temperature of 114 °C; while in double quench, the sample was firstly quenched to 130 °C for 20 min annealing, where LLPS occurred, and then to 114 °C. It was found that in the early stage of crystallization, the integrated values of Iq² and crystallinity, X_c, in the double quench procedure were consistently higher than those in the single quench procedure, which could be attributed to accelerated nucleation induced by enhanced concentration fluctuations and interfacial tension. In the late stage of crystallization, some morphological parameters were found to crossover and then reverse, which could be explained by retardation of lamellar growth due to phase separation formed during the double quench procedure. This phenomenon was also confirmed by DSC measurements in blends of different compositions at varying isothermal crystallization temperatures. The crystal lamellar thickness determined by SAXS showed a good agreement with TEM observation. Results indicated that the early stage LLPS in the PEH/PEB blend prior to crystallization indeed dictated the resulting lamellar structures, including the average size of lamellar stack and the stack distribution. There seemed to be little variation of lamellar thickness and long period between the two quenching procedures (i.e., single quench versus double quench).     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

COACH: COllaborative certificate stAtus CHecking mechanism for VANETs

Vehicular Ad Hoc Networks (VANETs) require mechanisms to authenticate messages, identify valid vehicles, and remove misbehaving vehicles. A public key infrastructure (PKI) can be used to provide these functionalities using digital certificates. However, if a vehicle is no longer trusted, its certificates have to be revoked and this status information has to be made available to other vehicles as soon as possible. In this paper, we propose a collaborative certificate status checking mechanism called COACH to efficiently distribute certificate revocation information in VANETs. In COACH, we embed a hash tree in each standard Certificate Revocation List (CRL). This dual structure is called extended-CRL. A node possessing an extended-CRL can respond to certificate status requests without having to send the complete CRL. Instead, the node can send a short response (less than 1 kB) that fits in a single UDP message. Obviously, the substructures included in the short responses are authenticated. This means that any node possessing an extended-CRL can produce short responses that can be authenticated (including Road Side Units or intermediate vehicles). We also propose an extension to the COACH mechanism called EvCOACH that is more efficient than COACH in scenarios with relatively low revocation rates per CRL validity period. To build EvCOACH, we embed an additional hash chain in the extended-CRL. Finally, by conducting a detailed performance evaluation, COACH and EvCOACH are proved to be reliable, efficient, and scalable.     

Downstream environmental effects of dam operations: Changes in habitat quality for native fish species

Hydropeaking dam operation and water extractions for irrigation have been broadly stated as alterations to natural flow regimes, which have also been noticed in the Biobío Watershed, in Central Chile, since 1996. In the Biobío River, most of native fish species are endemic and very little is known about them. Their ecological and social values have never been estimated, and there is lack of information about their habitat preferences. Furthermore, changes on fish habitat availability due to natural and/or man‐made causes have not been evaluated. In this study, eight native fish species, in a representative reach of the Biobío River, were studied and their preferred habitats were surveyed and characterized. A hydrodynamic model was built and linked to the fish habitat simulation model CASiMiR. Fuzzy rules and fuzzy sets were developed for describing habitat preference of the native fish species. CASiMiR was then used to simulate how physical habitat conditions vary due to flow control (i.e. upstream dams). Results show how overall habitat quality, expressed as weighted usable area (WUA) and hydraulic habitat suitability (HHS), changes and fluctuates due to the dam operation and how the daily hydropeaking is influencing quantity, quality and location of different habitats. The study suggests that the analysed fish are highly susceptible to flow control, as dams are currently operated, and fish habitat improvement suggestions are proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

Analysis of retailers’ coalition stability for supply chain based on LCS and stable set

To attain the general form of stable coalition structure, this paper addressed the problem of retailers’ coalition stability in a two-stage supply chain consisting of one supplier and multiple retailers. A profit gain function was established via introducing market gain coefficient and coalition cost coefficient for different coalition structures. Based on the function, the profit of each retailer in all kinds of coalition structures was analysed, and the general feature of a stable coalition structure was attained by the largest consistent set method and the stable set method. Furthermore, some insights were obtained. For example, stable coalition structures are equidistributed or approximate equidistributed; with supplier’s cost increasing, the size of the retailers’ coalition increases. Finally, the above conclusions are verified by numerical simulation. The results of this paper provide a reference for retailers’ coalition in a supply chain, such as automobile or Information Technology supply chain.