Quadrilateral and tetrahedral mesh stripification using 2-factor partitioning of the dual graph

In order to find a 2-factor of a graph, there exists a O(n ^1.5) deterministic algorithm [7] and a O(n ³) randomized algorithm [14]. In this paper, we propose novel O(nlog³ nloglogn) algorithms to find a 2-factor, if one exists, of a graph in which all n vertices have degree 4 or less. Such graphs are actually dual graphs of quadrilateral and tetrahedral meshes. A 2-factor of such graphs implicitly defines a linear ordering of the mesh primitives in the form of strips. Further, by introducing a few additional primitives, we reduce the number of tetrahedral strips to represent the entire tetrahedral mesh and represent the entire quad surface using a single quad strip.     

Sustainable Development and the Sustainability of Competitive Advantage: A Dynamic and Sustainable View of the Firm

Does the need for sustainable development hinder businesses’ ability to create value? Is a firm’s competitiveness negatively affected by considering that need? After quickly reviewing the main literature contributions on the relationship between business and society, and drawing from resource‐based view of the firm and sustainable development literature, this paper presents a proposal for a dynamic and sustainable view of the firm. It shows how considering the changes introduced into the competitive landscape by sustainable development influences the way in which companies develop their resources, capabilities and activities, fostering the persistence of competitive advantages based on knowledge and innovation.     

A 32-mW 320-MHz continuous-time complex delta-sigma ADC for multi-mode wireless-LAN receivers

We present an experimental continuous-time complex delta-sigma multi-bit modulator, implemented in standard 0.25-/spl mu/m CMOS technology and meeting all major requirements for application in IEEE 802.11a/b/g wireless LAN receivers. The clock frequency is 320 MHz, producing an oversampling ratio of 16 for 20 MHz channel bandwidths. The modulator supports two operation modes for zero-IF and low-IF receiver architectures respectively, requires a single 2.5-V power supply, and dissipates only 32 mW of power. The measured peak signal-to-noise ratio is 55 dB. Further experimental results using sine-wave and OFDM test signals are also presented.     

Finite elements using a plane-wave basis for scattering of surface water waves

A generalized, frequency-independent, finite-element method is proposed for the numerical simulation of combined diffraction, refraction, radiation, reflection and absorption of water waves. Plane waves are used as an external function space, exploiting the standard set of approximation functions defined by the finite element method to enforce conformity and to impose boundary conditions in a straightforward manner by applying the method to the plane waves on each element. An integration method originally devised only for diffraction of waves by Ortiz and Sanchez in 2001 is extended to combined refraction and diffraction of high-frequency waves, retaining its dramatic savings in the number of operations for a given error compared with standard numerical integration methods.     

A wavelet-based ECG delineator: evaluation on standard databases

In this paper, we developed and evaluated a robust single-lead electrocardiogram (ECG) delineation system based on the wavelet transform (WT). In a first step, QRS complexes are detected. Then, each QRS is delineated by detecting and identifying the peaks of the individual waves, as well as the complex onset and end. Finally, the determination of P and T wave peaks, onsets and ends is performed. We evaluated the algorithm on several manually annotated databases, such as MIT-BIH Arrhythmia, QT, European ST-T and CSE databases, developed for validation purposes. The QRS detector obtained a sensitivity of Se = 99.66% and a positive predictivity of P+ = 99.56% over the first lead of the validation databases (more than 980,000 beats), while for the well-known MIT-BIH Arrhythmia Database, Se and P+ over 99.8% were attained. As for the delineation of the ECG waves, the mean and standard deviation of the differences between the automatic and manual annotations were computed. The mean error obtained with the WT approach was found not to exceed one sampling interval, while the standard deviations were around the accepted tolerances between expert physicians, outperforming the results of other well known algorithms, especially in determining the end of T wave.     

Passive in situ remediation of metal-polluted water with caustic magnesia: evidence from column experiments

Passive remediation consists of a permeable system that enables the water to pass through while retaining metals by means of biogeochemical reactions. Conventional passive treatments are based on calcite dissolution. This increases the pH to values between 6 and 7, which are insufficiently high to precipitate divalent metals. Alternative treatments are based on sulfate reduction with organic matter in order to precipitate metal sulfides. However, redox reactions are usually too slow to treat large groundwater flows as currently found in gravel aquifers (>50 m/a). Caustic magnesia obtained from calcination of magnesium carbonate was tested as an alternative material to devising passive remediation systems. Caustic magnesia reacts with water to form magnesium hydroxide, which dissolves, increasing the pH to values higher than 8.5. Then zinc and lead are mainly precipitated as hydroxides, copper is precipitated as hydroxysulfate, and manganese(II) is oxidized and precipitated as manganese(III) oxides. Thus, metal concentrations as high as 75 mg/L in the inflowing water are depleted to values below 0.04 mg/L. Magnesia dissolution is sufficiently fast to treat flows as high as 100 m/a. The new precipitates may lead to a permeability drop in the porous treating system. Mixtures of caustic magnesia and an inert material such as silica sand (approximately 50% of each) have been shown to be as reactive as pure magnesia and permeable for a longer time (more than 10 months and 1000 pore vol).     

A high resolution workstation prototype for diagnosis of digital mammograms

The development of a total digital high resolution mammography display system must meet a number of requirements that remain a challenge nowadays, most probably because of the special nature of breast imaging. In this paper, we discuss our particular approach to address some problems concerning the complexity of soft-copy diagnosis in digital mammography, such as image quality and user interface evaluation. Based on the experience obtained in the previous implementation of a medical image browser, a more ambitious project is being developed at the Department of Radiology of the University of Santiago de Compostela (Spain) in collaboration with the Department of Medical Informatics of INTELSIS, an emerging software company in our country. This new system will provide complete support to display, store and analyze mammographic studies in digital format.     

A registration-based approach to quantify flow-mediated dilation (FMD) of the brachial artery in ultrasound image sequences

Flow-mediated dilation (FMD) offers a mechanism to characterize endothelial function and, therefore, may play a role in the diagnosis of cardiovascular diseases. Computerized analysis techniques are very desirable to give accuracy and objectivity to the measurements. Virtually all methods proposed up to now to measure FMD rely on accurate edge detection of the arterial wall, and they are not always robust in the presence of poor image quality or image artifacts. A novel method for automatic dilation assessment based on a global image analysis strategy is presented. We model interframe arterial dilation as a superposition of a rigid motion and a scaling factor perpendicular to the artery. Rigid motion can be interpreted as a global compensation for patient and probe movements, an aspect that has not been sufficiently studied before. The scaling factor explains arterial dilation. The ultrasound sequence is analyzed in two phases using image registration to recover both transformation models. Temporal continuity in the registration parameters along the sequence is enforced with a Kalman filter since the dilation process is known to be a gradual physiological phenomenon. Comparing automated and gold standard measurements (average of manual measurements) we found a negligible bias (0.05%FMD) and a small standard deviation (SD) of the differences (1.05%FMD). These values are comparable with those obtained from manual measurements (bias = 0.23%FMD, SD(intra-obs) = 1.13%FMD, SD(inter-obs) 1.20%FMD). The proposed method offers also better reproducibility (CV = 0.40%) than the manual measurements (CV = 1.04%).     

Region-based wavelet coding methods for digital mammography

Spatial resolution and contrast sensitivity requirements for some types of medical image techniques, including mammography, delay the implementation of new digital technologies, namely, computer-aided diagnosis, picture archiving and communications systems, or teleradiology. In order to reduce transmission time and storage cost, an efficient data-compression scheme to reduce digital data without significant degradation of medical image quality is needed. In this study, we have applied two region-based compression methods to digital mammograms. In both methods, after segmenting the breast region, a region-based discrete wavelet transform is applied, followed by an object-based extension of the set partitioning in hierarchical trees (OB-SPIHT) coding algorithm in one method, and an object-based extension of the set partitioned embedded block (OB-SPECK) coding algorithm in the other. We have compared these specific implementations against the original SPIHT and the new standard JPEG 2000, both using reversible and irreversible filters, on five digital mammograms compressed at rates ranging from 0.1 to 1.0 bit per pixel (bbp). Distortion was evaluated for all images and compression rates by the peak signal-to-noise ratio. For all images, OB-SPIHT and OB-SPECK performed substantially better than the traditional SPIHT and JPEG 2000, and a slight difference in performance was found between them. A comparison applying SPIHT and the standard JPEG 2000 to the same set of images with the background pixels fixed to zero was also carried out, obtaining similar implementation as region-based methods. For digital mammography, region-based compression methods represent an improvement in compression efficiency from full-image methods, also providing the possibility of encoding multiple regions of interest independently.