Parallel merged multiplier-accumulator coprocessor optimized for digital filters

In an attempt to improve the speed of VLSI signal processing systems, a new architecture for a high-speed multiply-accumulate (MAC) unit optimized for digital filters is proposed. This unit is designed as a coprocessor for the LEON2 RISC processor [LEON2 Processor; 2005 [Online]. <http://www.gaisler.com/products/leon2/leon.html>]. In this work, four parallel MAC units with two dual-port coefficient register-files, a three-port general register-file and a control unit are included in the coprocessing block. With the existence of four parallel units, several SIMD format instructions have been added to LEON2 instruction set. Each MAC unit has two 16-bit inputs, 32-bit output register and a programmable round-saturate block. The MAC unit uses a new architecture which embeds the accumulate module within the partial products summation tree of the multiplier with minimum overhead. A central control unit controls inputs of the four MACs and loading of the output registers. Our experimental results demonstrate a high performance in implementation of digital filters at elevated speeds of up to 33 millions of input samples per second in a 0.18 μm technology.     

Optimality and convergence of adaptive optimal control by reinforcement synthesis

Adaptive Optimal Control (AOC) by reinforcement synthesis is proposed to facilitate the application of optimal control theory in feedback controls. Reinforcement synthesis uses the critic–actor architecture of reinforcement learning to carry out sequential optimization. Optimality conditions for AOC are formulated using the discrete minimum principle. A proof of the convergence conditions for the reinforcement synthesis algorithm is presented. As the final time extends to infinity, the reinforcement synthesis algorithm is equivalent to the Dual Heuristic dynamic Programming (DHP) algorithm, a version of approximate dynamic programming. Thus, formulating DHP with the AOC approach has rigorous proofs of optimality and convergence. The efficacy of AOC by reinforcement synthesis is demonstrated by solving a linear quadratic regulator problem.     

Understanding social networking sites adoption in China: A comparison of pre-adoption and post-adoption

Prior experience is an important determinant factor of individual behavior. This paper developed a theoretical model to predict the adoption intention of pre-adopters and post-adopters on social networking sites based on the theory of planned behavior. Using data from online surveys of netizens in China, the proposed model was tested in the context of pre-adoption and post-adoption by using the Partial Least Squares (PLS) technique. Then, multi-groups analysis was explored to compare the difference between the two groups. The results show that attitude, subjective norm and perceived behavior control have significant effect on the adoption intention of pre-adopters and post-adopters, and there is no significant difference between the two groups. In addition, information, meeting new people, and conformity motivations have the same significant effect on both groups. However, entertainment motivation has a significant effect on pre-adopters but connecting with old friends has none; in contrast, connecting with old friends has significant effect on post-adopters while entertainment motivation has no significant effect.     

Clipping algorithms for solving the nearest point problem over reduced convex hulls

The nearest point problem (NPP), i.e., finding the closest points between two disjoint convex hulls, has two classical solutions, the Gilbert-Schlesinger-Kozinec (GSK) and Mitchell-Dem’yanov-Malozemov (MDM) algorithms. When the convex hulls do intersect, NPP has to be stated in terms of reduced convex hulls (RCHs), made up of convex pattern combinations whose coefficients are bound by a μ<1 value and that are disjoint for suitable μ. The GSK and MDM methods have recently been extended to solve NPP for RCHs using the particular structure of the extreme points of a RCH. While effective, their reliance on extreme points may make them computationally costly, particularly when applied in a kernel setting. In this work we propose an alternative clipped extension of classical MDM that results in a simpler algorithm with the same classification accuracy than that of the extensions already mentioned, but also with a much faster numerical convergence.     

Supervised Multivariate Analysis of Hyper-spectral NIR Images to Evaluate the Starch Index of Apples

Fruit maturity indexes are crucial in harvest time determination and commercial context. The harvest time of apples, matching the desired commercial characteristics, is assessed through starch–iodine test in practice. Fruit halves are dipped into iodine solution and patterns are visually evaluated by experts comparing them to reference charts. Aim of the work was to study the relationships of near infrared (NIR) spectral images (1,000–1,700 nm), starch/starch-free patterns visually assessed and RGB color images. Spectral images of 88 Golden Delicious Klon B apples were sampled at seven different maturity stages. Partial least-squares discriminant analysis (PLSDA) technique was used on hyper-spectral NIR images to classify single pixels using its NIR reflectance spectrum. The response variable (i.e. the classification for each pixel) was identified through the matching of single pixel obtained with the color images, segmented in two classes (starch and starch-free), and the NIR hyper-spectral matrix. Mean hyper-spectral classification obtained through PLSDA modeling on individual apple correctly classified 80.81% of the total pixels, while the unique model, i.e. a single model including all the fruits, resulted in 66.33%. In the latter case, the relationship with the RGB classification showed high values (Pearson correlation coefficient r = 0.95). The present work shows the feasibility of NIR imaging spectroscopy as a tool for apple fruit maturity determination, avoiding expert’s subjective interpretation by traditional starch index assignments.     

Mechanical Properties of Silicon Oxycarbide Ceramic Foams

The mechanical properties of ceramic foams obtained through a novel process that uses the direct foaming and pyrolysis of preceramic polymer/polyurethane solutions were investigated. The elastic modulus, flexural strength, and compressive strengths were obtained for foams in the as-pyrolyzed condition; values up to 7.1 GPa, 13 MPa, and 11 MPa, respectively, were obtained. The strength of the foam was virtually unchanged at temperatures up to 1200°C in air; however, long-term exposure at 1200°C led to a moderate degradation in strength, which was attributed to the evolution of intrastrut porosity during the oxidation of residual free carbon, as well as devitrification of the foams struts.     

PowerBuilder/Sybase模式的数据完整性和并发控制

以PowerBuilder/Sybase模式为例,全面介绍了C/S模式中实现数据完整性控制和多用户并发操作的一些基本理论、具体方法和设计策略.     

变压发泡工艺对聚氨酯泡沫泡孔结构控制的研究

利用变压发泡可实现对聚氨酯泡沫泡孔结构的控制,得到气孔细密均匀的泡沫体。主要探讨了变压发泡工艺下,恒压时间、压力大小对泡沫泡孔结构的影响     

On chip novel video streaming system for bi-network multicasting protocols

In the past three decades, tremendous Ethernet-related research has been done, which has led to today's ubiquitous Ethernet technology. On the other hand, with the emergence of new network needs, a new protocol, the IEEE 1394 standard serial bus (or Firewire) was introduced. Firewire is suitable for high-quality audio/video applications which do not perform well in the best-effort-based Ethernet technology. However, since Firewire is a serial bus, it has harsh cable length limitations as compared to Ethernet capabilities.In this paper, we present a novel on-chip system that receives Firewire video and transmits it in multicast mode using Ethernet protocol. A major advantage of this novel system is to utilize the existing Ethernet infrastructure to extend the range of Firewire video streaming to reach remote nodes and make it even accessible to nodes with a single Ethernet interface. This will have tremendous impact on Firewire applications such as deploying Firewire cameras in big-scale security-sensitive buildings or industrial facilities with image-based remote quality control.This novel chip utilizes the concept of Ethernet multicasting transmission mode for video streaming. The proposed chip design converts the IEEE 1394 isochronous traffic to the Ethernet multicast frame format via two off-chip asynchronous write and read buffers.The goal of this research is to design an On Chip Novel Video Streaming System that avoids performance bottlenecks in the software protocol conversion of these two important network protocols. The author decided to study these two networks because of their broad use and cable power provisioning capabilities. The novel system design is implemented using a customized field programmable gate array (FPGA), which enables the integration of various system components on one chip. The designed prototype is studied using both network monitoring tools and analytical techniques, to verify its function and compare it with the existing approaches.Performance measures show that the On Chip Novel Video Streaming System consumes less than 21 mW of power for 100 Mbps and 82 mW of power for 1 Gbps, and utilizes 57% of a Xilinx Spartan 2-100E-6FT256 FPGA resources. Hence, it is possible to incorporate further extensions. Experimental results show that 88% of the network utilization can be achieved, due to the use of the customized, FPGA-based design of bi-network traffic conversion.     

Influence of counterface roughness on friction properties of engineering plastics for bearing applications

The study investigates the effects of the roughness of the metal counterface (mirror finished or polished) on the coefficient of dry friction for some of the most common engineering plastics used in current bearing technology. The results show that an optimal roughness for minimum friction is likely to exist for any polymer, and it depends on the bulk properties of the polymer itself. “Soft” plastics characterized by a low modulus of elasticity exhibit better sliding behaviour on very smooth, mirror finished surfaces, whereas for high-modulus plastics lower friction is measured in combination with rougher, polished counterfaces. The influence of the contact pressure and sliding velocity are also investigated and found to depend on the layout of the tribological system.