Effects of nisin concentration on properties of gelatin film-forming solutions and their films

The addition of nisin into a gelatin matrix can change properties of the film. The aim of this work was to develop gelatin-based films containing different nisin concentrations in order to study their influence on the film's antimicrobial and physical properties and their rheological properties as a film-forming solution (FFS). The FFS was characterised by rheological assays, and the gelatin-based active films were characterised and assessed by the effects of nisin concentrations on their various properties, including antimicrobial activity. Nisin's concentration affected not only its viscoelastic properties of FFS but also its film solubility in water, film surface roughness and light barrier. The addition of nisin also slightly modified the water contact angle and the mechanical properties of the gelatin films. Finally, the films demonstrated activity against Staphylococcus aureus and Listeria monocytogenes at concentrations above 56 mg of nisin g⁻¹ of gelatin.     

Socially-Aware Multimedia Dissemination in Personal Mobile Networks

Wireless Personal Communications - Mobile multimedia entertainment is pervasive on mobile devices, leading people to access, store and disseminate a diversity of multimedia contents anytime and...     

Extensional rheology of raw natural rubber from new clones of Hevea brasiliensis

Natural rubber (NR) is a biopolymer whose properties depend on the molecular structure of the 1,4‐cis polyisoprene chains, nonrubber constituents, environmental conditions, etc. NR has been characterized by Mooney viscosity, Wallace plasticity, nitrogen content (%N). However, these cannot effectively account for clone's differences. The aim of this work is to use extensional rheology to characterize and differentiate NR samples as for clone type and the season of the year in comparison to the traditional characterizations. Three IAC 300 series and RRIM 600 clones of Hevea brasiliensis tapped between October 2006 (Oct_06) and August 2008 (Aug_08) were investigated. IAC 329 clones showed the least susceptibility to seasonal changes, whereas RRIM 600 was the most influenced. An opposite trend between extensional viscosity (η_E) and %N was established. The former was very sensitive to changes in the molecular structure of NR, being fundamental for monitoring purposes and strategic development of new rubber tree clones. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Modeling the reliability of a group membership protocol for dual-scheduled time division multiple access networks

We present reliability models for a group membership protocol designed for TDMA networks such as FlexRay, a protocol that is likely to become the de facto standard for next generation automotive networks. The models are based on discrete-time Markov chains and consider a comprehensive set of fault scenarios. Furthermore, they are parametric allowing for a sensitivity analysis. The results, obtained by a numeric solution of the models using the PRISM model-checker, show that they are computationally practical for realistic configurations and that the GMP can achieve reliability levels in the range required for safety critical applications.     

Carbonation durability of blended cement pastes used for waste encapsulation

Blended cement pastes are currently used for encapsulation of low level and intermediate level nuclear waste in the UK. However, there is still little information on the long-term durability of those mixes to some chemical attacks. Accelerated testing may predict the long-term durability or at least help the selection of more durable formulations. In this work, blended blastfurnace slag (BFS)/Portland cement (OPC) pastes containing 60, 75 and 90% BFS and pulverised fuel ash (PFA)/OPC pastes with 40, 55 and 75% PFA were cured at 20 and 60°C for 90 days then submitted to natural and accelerated carbonation (5% CO₂). The effects of the curing temperature as well as the OPC replacement level on the carbonation ratio are presented. Results showed a good correlation between natural and accelerated carbonation for the pastes studied. Carbonation was found to be governed by the amount of calcium hydroxide available in the mixes before the process started.     

Development of semitransparent wood‐polymer composites

A new material has been developed consisting of pieces of wood embedded within a matrix of acrylic polymer, resulting in a transparent or semitransparent wood‐based product. This material presents quite appealing aesthetic features, thereby opening new possibilities for decorative applications. Because acrylic and methacrylic monomers are in the liquid state at room temperature, it is possible to introduce wood (in the current case, walnut wood) into a mixture of acrylic (hydroxypropyl acrylate) and/or methacrylic monomers (methyl methacrylate and 2‐hydroxyethyl methacrylate) along with a plasticizer (dioctyl phthalate) in the presence of a chemical initiator (benzoyl peroxide). A transparent polymeric matrix with dispersed wood is then obtained through bulk free‐radical polymerization. Introducing this reaction mixture along with pieces of wood into a mold results in a wood‐polymer composite. A 2^4?1 experimental fractional factorial design was implemented to study the importance of the composition of these materials on several relevant properties. The sheets produced were characterized by tensile testing, dynamic mechanical thermal analysis, thermal gravimetric analysis, and heat deflection temperature. The models obtained for predicting each property pointed to valuable insights regarding the influential constituents. In particular, our results suggested that monomers to be used in future applications of this material should be selected in terms of their cost and the desired flexibility for the final product, not in terms of their polarity. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Assisted history matching in the presence of frequent well intervention using generalize travel time inversion

In this paper we propose an efficient and novel technique that handles production discontinuities through a resampling of the production data, eliminating high frequency production details in a transformed domain. The technique also reduces non-monotonic behavior and results in a response more suitable for the GTTI based misfit calculations. Our proposed approach has been applied to an offshore turbidite reservoir with extensive well intervention resulting in highly detailed production responses. The static model contains more than three-hundred-thousand cells, complex sand depositional distribution combined with fault structures, four pairs of injector-producers, deviated producing wells and more than 8 years of production history. Previous history matching attempts using traditional approaches had difficulties matching production response at the individual well level. With our proposed modifications to the GTTI approach, a significant improvement was obtained on the well level match quality. Most importantly, by visualizing the streamlines and the dynamic adjustment of flow paths during history matching, we could easily identify the areas of inconsistency between the geologic model and the production data. The calibrated geologic model and streamline trajectories provided important insight about communication within sand channels, differences in flow paths and barriers that have not been included in the previous geologic and seismic interpretation.     

STL-free design and manufacturing paradigm for high-precision powder bed fusion

High-precision powder bed fusion (PBF), together with highly complex geometries necessitate a much more scalable representation of the geometry and an efficient computational pipeline. This paper presents a new digital design and manufacturing paradigm to solve the scalability and efficiency challenges by using the concept of STL-free workflow. It seamlessly integrates implicit solid modelling for design and direct slicing for manufacturing without any intermediate steps related to STL meshes. The presented paradigm has been validated by two case studies involving complex geometries filled with multiscale triply periodic minimal surfaces (TPMS), which are fabricated by PBF with laser beam size 25 µm.     

Crystallization kinetics of thermoplastic elastomeric blends based on ground tyre rubber

This work analyzes the crystallization process of thermoplastic elastomeric blends (TPE) based on ground tyre rubber (GTR). More specifically it analyzes the effect of GTR and fresh rubber materials, like ethylene propylene diene monomer (EPDM) and ethylene propylene rubber (EPR), on the crystallization of binary and ternary polypropylene (PP)‐based blends. The crystallization kinetics is studied under isothermal and nonisothermal conditions using differential scanning calorimetry (DSC). The kinetic parameters derived from the Avrami model are used to study the effect of temperature and rubber materials on the nucleation mechanism, the morphology of the crystalline structures, and the crystallization rate. Results reveal that GTR has a strong nucleating effect on PP and that its presence leads to higher crystallization rates. The EPDM presence has a slight effect on the PP crystallization process whereas EPR has no significant effect. From the DSC curves it is possible to detect an inverse relationship between temperature and the crystallization rate. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42589.