Effect of crystallization on morphology-conductivity relationship in polypyrrole/poly(?-caprolactone) blends

Electrically conducting blends, based on polypyrrole (PPy) as the conductive polymer and poly(?-caprolactone) (PCL) as an insulating polymeric matrix, were prepared by polymerizing pyrrole (Py) in its vapor state inside the PCL matrix. The roles of specific interactions between blend components as well as the crystallization of PCL matrix in the resulting morphology have been analyzed by Fourier-transform infrared spectroscopy (FTIR), thermo-optical analysis (TOA) and atomic force microscopy (AFM). The results indicate that PPy is located within both the intra and interspherulitic regions of the PCL matrix achieving a well-developed connected network. Compared with amorphous matrices, considerable conductivity (around 1 S/cm) was raised with the crystalline PCL matrix with only a relatively low level of the conductive polymer (∼5%) in the blend.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

A Context-Aware Interaction Model for the Analysis of Users’ QoE in Mobile Environments

This article describes a novel approach to model the quality of experience (QoE) of users in mobile environments. The context-aware and ratings interaction model (CARIM) addresses the open questions of how to quantify user experiences from the analysis of interaction in mobile scenarios, and how to compare different QoE records to each other. A set of parameters are used to dynamically describe the interaction between the user and the system, the context in which it is performed and the perceived quality of users. CARIM structures these parameters into a uniform representation, supporting the dynamic analysis of interaction to determine QoE of users and enabling the comparison between different interaction records. Its run-time nature allows applications to make context- and QoE-based decisions in real time to adapt themselves, and thus provide a better experience to users. As a result, CARIM provides unified criteria for the inference and analysis of QoE in mobile scenarios. Its design and implementation can be integrated (and easily extended if needed) into many different development environments. An experiment with real users comparing two different interaction designs and validating user behavior hypotheses proved the effectiveness of applying CARIM for the assessment of QoE in mobile applications.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Gripper Design for Radio Base Station Autonomous Maintenance System

For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.

     

Time-domain Analysis of Laboratory Experiments on the Transient Pressure Damping in a Leaky Polymeric Pipe

Water Resources Management - The pressure damping occurring in pressurized pipes with a leak during transients has been examined as a diagnostic tool – the so-called transient damping method...     

A finite volume–finite difference method with a stiff ordinary differential equation solver for advection–diffusion–reaction equation

A model for atmospheric pollutant transport is proposed considering an advection–diffusion–reaction equation. A splitting method is used to decouple the advection, diffusion and reaction parts. A scheme based on finite volume, finite difference and backward differentiation formula is used for solving an atmospheric transport-chemistry problem.     

Predicting teamwork results from social network analysis

Modelling students' behaviours has reached a status that can only be overcome by improving the ability of predicting the results on teamwork. Indeed, teamwork is an important piece on the learning process, but understanding their mechanisms and predicting the results achieved is far from being solved by traditional classifiers. In this paper, we address the problem of predicting teamwork results, and propose a recommender system that suggests new teams, in the context of a given curricular unit. Any student, who is looking for a team, may use the system; in particular, he may ask for the best team to join, either considering all available colleagues or just the set of his previous teammates. Our system makes use of social network analysis and classification methods as the algorithmic core of the decision‐making process. System evaluation is presented through a set of experimental results, which report the performance of social network analysis and classification algorithms over real datasets.     

Factors influencing the decision to crowdsource: A systematic literature review

Crowdsourcing is currently attracting much attention from organisations for its competitive advantages over traditional work structures regarding how to utilise skills and labour and especially to harvest expertise and innovation. Prior research suggests that the decision to crowdsource cannot simply be based on perceived advantages; rather multiple factors should be considered. However, a structured account and integration of the most important decision factors is still lacking. This research fills the gap by providing a systematic literature review of the decision to crowdsource. Our results identify nine factors and sixteen sub-factors influencing this decision. These factors are structured into a decision framework concerning task, people, management, and environmental factors. Based on this framework, we give several recommendations for managers making the crowdsourcing decision.