Adaptive channel assignment scheme for wireless networks

In this paper, an adaptive channel assignment scheme is proposed to ensure the quality of services for the wireless networks. The proposed scheme divides the channels into two categories, the guard channels and the shared channels. The number of guard channels is estimated by the Markovian model in order to keep the handoff calls higher priority. The remaining channels, called shared channels, can be used by both new calls and handoff calls. The proposed scheme based on incoming rates of handoff and new calls allocates channels for guard and shared channels. In addition, this approach is able to provide quality of service guarantee in terms of handoff dropping rate. From the simulation, the proposed scheme significantly improves the dropping rate and the blocking rate in comparison with the existing methods.     

Lubrication performance of finite journal bearings considering effects of couple stresses and surface roughness

To inspect the performance characteristics of finite journal-bearing systems, the combined effects of couple stress due to a Newtonian lubricant blended with additives and the presence of roughness on journal-bearing surfaces are studied in this article. Basing on the Stokes theory and Christensen’s stochastic model, the stochastic generalized Reynolds equation is deduced. The film pressure distribution equation is numerically solved by using the conjugate gradient method of iterations. According to the results, the couple stress effects can raise the film pressure of the lubricant fluid, improve the load-carrying capacity and reduce the friction parameter, especially at high eccentricity ratio. The surface roughness effect is dominant in long bearing approximation and the influence of transverse or longitudinal roughness to the journal bearing is in reverse trend. In general, the critical value of length-to-diameter is 1.1.     

A Practical and Controllable Hair and Fur Model for Production Path Tracing

We present an energy‐conserving fiber shading model for hair and fur that is efficient enough for path tracing. Our model adopts a near‐field formulation to avoid the expensive integral across the fiber, accounts for all high order internal reflection events with a single lobe, and proposes a novel, closed‐form distribution for azimuthal roughness based on the logistic distribution. Additionally, we derive, through simulation, a parameterization that relates intuitive user controls such as multiple‐scattering albedo and isotropic cylinder roughness to the underlying physical parameters.     

Data envelopment analysis in resource allocation: An application to forest management

This paper discusses the resource allocation problem for not-for-profit organizations that have control over several production units of similar functions. A case of budget allocation among the subdistricts of a forest district in Taiwan is exemplified to illustrate the idea. The model proposed is a nonlinear fractional program superimposed upon the data envelopment analysis framework. This nonlinear fractional program can be transformed to a model similar to the generalized linear program and solved by a type of decomposition method. Within prespecified ranges, the district office searches for ways of allocating a fixed amount of budget to its subdistricts to result in a higher aggregate efficiency score. Wider ranges allow for more flexibility in allocating budget; consequently, higher aggregate efficiency scores are experienced. Since this method is more objective, it is more persuasive to the subdistricts in allocating resources.     

Acoustic emission characterization of steel in H2S solution subjected to tensile load

Abstract

This paper investigates the characteristics of acoustic emission (AE) signals generated from hydrogen induced cracking (HIC) and sulfide stress corrosion cracking (SSCC) for a medium strength steel in hydrogen sulfide (H₂S) solution. The experiments performed in this study include the constant load test (CLT) and the constant extension rate test (CERT).

From the results of the CLT, the AE count rate caused by SSCC was found to be much higher than that resulted from the HIC; and the increase of the AE count rate was observed to be approximately proportional to the increase of the applied loading. In addition, the AE frequency distribution diagrams obtained from these tests were found to contain potential information for distinguishing the mechanisms of HIC and SSCC. From the results of CERT, the AE signals detected from the specimens tested in the H₂S solution were compared with those obtained from the specimens tested in the air. In addition, the AE count rate detected from the tensile specimens was studied according to the different deformation stages of the specimens. From this study, the variation of the AE count rate in each deformation stage was described.     

An ergonomic study of visual optimization by light color managements

Light‐emitting diodes (LEDs) have the advantage of controllable light colors and provide the optimal lighting quality against various color attributes required in different environments. However, from the humanized design point of view, beside satisfying physical demands of people, it is also important to achieve satisfaction. With a good match between the LED lighting equipment and ambient colors, the space imagery that complies with psychological needs of human beings can be found. This is expected to become a new market direction for future lighting. In this study, the LED light source feature of adjustable correlated color temperature is used to match wall colors of typical commercial spaces and for the investigation and analysis of the impact of colors of light sources and environments on human beings. The measures of mental and subjective feelings of a group of people under various circumstances have also been investigated. Multivariate analysis of variance has been conducted on three color temperatures of light sources, six wall colors, and measures of five emotion adjectives, and the correlation between these three variables has been further investigated. © 2014 Wiley Periodicals, Inc. Col Res Appl, 41, 72–84, 2016     

Conversion of hydrogen/carbon dioxide into formic acid and methanol over Cu/CuCr2O4 catalyst

Cu/CuCr₂O₄ catalysts were prepared by impregnation method at various calcination temperatures (300, 400, and 500 °C) and then reduced in H₂ stream. The aggregated particles and decreasing surface area/pore volumes of the deactivated catalysts during HCOOH and CH₃OH formations were also observed. Particularly, the EXAFS data showed that first shells of Cu atoms transforms from Cu–O to Cu–Cu after catalytic reactions, their bond distances and coordination numbers are quite different, respectively. It revealed that metallic Cu atoms are one of the important active species over catalyst surface at different reaction temperatures having many unoccupied binding sites for HCOOH and CH₃OH formations. Additionally, the optimal calcination temperature for Cu/CuCr₂O₄ catalysts was demonstrated at 400 °C that attributed to its strongest acidity and basicity. The catalytic reactions in the duration of HCOOH and CH₃OH preparation were proposed that were composed of HCOOH formation, CH₃OH formation, and CH₃OH decomposition happening at CuCr₂O₄, Cu, and CuO active sites, respectively. The highest CO₂ conversion (14.6%), HCOOH selectivity/yield (87.8/12.8%), and TON/TOF values (4.19/0.84) were obtained at 140 °C and 30 bar in 5 h, respectively. Optimal rate constant (2.57 × 10^?2 min^?1) and activation energy (16.24 kJ mol^?1) of HCOOH formation were evaluated by pseudo first-order model and Arrhenius equation, respectively.     

On the interfacing between QEMU and SystemC for virtual platform construction: Using DMA as a case

In this paper, we present an interface for the hardware modeled in SystemC to access those modeled in QEMU on a QEMU and SystemC-based virtual platform. By using QEMU as the instruction-accurate instruction set simulator (IA-ISS) and its capability to run a full-fledged operating system such as Linux, the virtual platform with the proposed interface can be used to facilitate the co-design of hardware models and device drivers at the early stage of Electronic System Level (ESL) design flow. In other words, by using such a virtual platform, the hardware models and associated device drivers can be cross verified while they are being developed so that malfunctions in the hardware models or the device drivers can be easily detected. Moreover, the virtual platform with the proposed interface is capable of providing statistics of instructions executed, memory accessed, and I/O performed at the instruction-accurate level—thus not only making it easy to evaluate the performance of the hardware models but also making it possible for design space exploration.