Obtaining condensed milk from a mixture of hydrosoluble extract of soybean powder and cow's milk]

Three formulations of mix concentrated milk with hydrosolubles extract of soybean powder and cow's milk were prepared. The products were condensed up to 31% and 33.65% of solids in a vacuum evaporator at temperature of 45 degrees and 58 degrees C with a vacuum pressure of 540 mmHg. The products obtained were compared with standard concentrated milk through sensory evaluation showing satisfactory characteristics.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

An investigation of the synergistic effect between magnetite nanoparticles and polypyrrole in nanostructured layer-by-layer films

In this paper, we report the controlled fabrication of layer-by-layer (LbL) films deposited on gold substrates with three different supramolecular architectures using polypyrrole (Ppy) and magnetite nanoparticles (Fe₃O₄-np), besides conventional poly(allylamine hydrochloride) (PAH) e poly(vinyl sulfonic acid) (PVS) polyelectrolytes, demonstrating the synergistic effect between Ppy and Fe₃O₄-np such as a result of their interaction. Modified gold electrodes were analyzed by contact angle (wettability), surface plasmon resonance (SPR), raman spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The (Fe₃O₄-np/Ppy)₃ architecture was also evaluated by scanning electron microscopy. The modified gold electrodes present more homogeneous covering, higher electron transfer and a decrease of resistance with the incorporation of the nanostructured materials such as Ppy and Fe₃O₄-np forming (Fe₃O₄-np/Ppy)₃ LbL film. The results carried out in this study suggest that the (Fe₃O₄-np/Ppy)₃ LbL film can be applied as a possible electrochemical or optical non-enzymatic sensor for analytical detection.     

Antistatic packaging based on PTT/PTT-g-MA/ABS/MWCNT nanocomposites: Effect of the chemical functionalization of MWCNTs

Polymer/carbon nanotube nanocomposites have attracted high interest for a wide spectrum of applications, including antistatic packaging used to protect electronic devices against electrostatic discharge. Polytrimethylene terephthalate (PTT)/maleic-anhydride-grafted PTT (PTT-g-MA)/acrylonitrile butadiene styrene (ABS) blend-based multiwall carbon nanotubes (MWCNTs) nanocomposites were prepared through extrusion. It was conducted chemical functionalization on the MWCNTs by oxidation using nitric acid to introduce functional groups. The effect of the amount (0.5 or 1.0 wt%) and functionalization of MWCNTs on the nanocomposites was investigated. Despite the poor barrier properties of PTT/PTT-g-MA/ABS/MWCNT nanocomposites due to the presence of voids confirmed by scanning electron microscopy (SEM), the nanocomposites with functionalized MWCNT (MWCNTf) showed excellent barrier properties, indicating that the functionalization process improved the interaction between the MWCNTs and the matrix. The addition of MWCNTs into PTT/PTT-g-MA/ABS blend decreased the electrical resistivity by eight orders of magnitude. The use of MWCNTf may still disrupt the electrical network pathway and slightly decreasing the electrical resistivity, but the nanocomposites present the desired properties required for antistatic packaging.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Effect of rinsing and drying on silicon surface cleaning for epitaxial growth

We investigated the effect of the rinsing and drying technique on the oxygen and carbon concentration on a silicon surface. Rinsing in deionized water increased the interfacial oxygen concentration and helped generate defects. Blow-drying was more efficient than spin-drying in reducing interfacial oxygen concentration. Exposure to the atmosphere was detrimental to obtaining high crystallinity in the epitaxial layer. We evaluated the effectiveness of the cleaning process by observing the grown epilayer and the epilayer/substrate interface.     

The corrosion of mild steel in simulated SO2 containing atmospheres

Electrochemical tests were carried out on steel/steel multi-laminar cells under thin layers of sulphate solution simulating atmospheres with contents of 20, 50 and 75 μg m⁻³ of SO₂ and a relative humidity of 85%. Measurements of the current flowing between the two electrodes of the cell vs drying time and impedance measurements for different times were taken. Potentiodynamic cathodic polarization plots were also obtained for one concentration of contaminant at various drying times using three electrode multi-laminar cells. The results showed that the multi-laminar cells allowed the drying process of the thin electrolyte films to be followed. The use of electrochemical techniques gave information on the kinetics and mechanism of the corrosion process occurring during the drying period. Initially the process is controlled by oxygen diffusion through the liquid film, but for longer periods the control changes to the anodic reaction.     

Factors of low individual degree polynomials

Kaltofen (Randomness in computation, vol 5, pp 375–412, 1989) proved the remarkable fact that multivariate polynomial factorization can be done efficiently, in randomized polynomial time. Still, more than twenty years after Kaltofen’s work, many questions remain unanswered regarding the complexity aspects of polynomial factorization, such as the question of whether factors of polynomials efficiently computed by arithmetic formulas also have small arithmetic formulas, asked in Kopparty et al. (2014), and the question of bounding the depth of the circuits computing the factors of a polynomial. We are able to answer these questions in the affirmative for the interesting class of polynomials of bounded individual degrees, which contains polynomials such as the determinant and the permanent. We show that if \({P(x_{1},\ldots,x_{n})}\) is a polynomial with individual degrees bounded by r that can be computed by a formula of size s and depth d, then any factor \({f(x_{1},\ldots, x_{n})}\) of \({P(x_{1},\ldots,x_{n})}\) can be computed by a formula of size \({\textsf{poly}((rn)^{r},s)}\) and depth d + 5. This partially answers the question above posed in Kopparty et al. (2014), who asked if this result holds without the dependence on r. Our work generalizes the main factorization theorem from Dvir et al. (SIAM J Comput 39(4):1279–1293, 2009), who proved it for the special case when the factors are of the form \({f(x_{1}, \ldots, x_{n}) \equiv x_{n} - g(x_{1}, \ldots, x_{n-1})}\). Along the way, we introduce several new technical ideas that could be of independent interest when studying arithmetic circuits (or formulas).     

Assessing the impact of real-time machine translation on multilingual meetings in global software projects

Communication in global software development is hindered by language differences in countries with a lack of English speaking professionals. Machine translation is a technology that uses software to translate from one natural language to another. The progress of machine translation systems has been steady in the last decade. As for now, machine translation technology is particularly appealing because it might be used, in the form of cross-language chat services, in countries that are entering into global software projects. However, despite the recent progress of the technology, we still lack a thorough understanding of how real-time machine translation affects communication. In this paper, we present a set of empirical studies with the goal of assessing to what extent real-time machine translation can be used in distributed, multilingual requirements meetings instead of English. Results suggest that, despite far from 100 % accurate, real-time machine translation is not disruptive of the conversation flow and, therefore, is accepted with favor by participants. However, stronger effects can be expected to emerge when language barriers are more critical. Our findings add to the evidence about the recent advances of machine translation technology and provide some guidance to global software engineering practitioners in regarding the losses and gains of using English as a lingua franca in multilingual group communication, as in the case of computer-mediated requirements meetings.