Particle distribution control in cast aluminium alloy-mica composites

A suspension of mica particles (40m diameter and 3.7 thick) obtained in a mechanically stirred Al-4 wt % Cu-1.5 wt % Mg melt was poured and solidified in a variety of moulds under different heat flow configurations. The resulting cast structure showed a non-uniform distribution of dispersed mica particles with mica-depleted and segregated zones due to their flotation before and during solidification. The experimentally observed profiles of mica-free regions deviate significantly from those computed on the basis of Stokes's law and freezing-time computations. In relatively thick castings, segregation of mica could be minimized by using low pouring temperatures and/or side as well as bottom chilling. It was found, however, that thin castings (12.5 mm) could easily be produced with a homogeneous distribution of mica particles.     

A summary of ring rolling technology—I. Recent trends in machines, processes and production lines

Ring rolling process is widely used in the production of seamless rings for automotive and aerospace industry. This paper presents a summary of the ring rolling technology: machine and process types; process considerations; and examples of ring rolling lines. In this technology survey, recent trends in ring rolling machines and processes are emphasized. This survey will be specially valuable for industry personnel engaged with the selection and implementation of ring rolling lines and process planning engineers working with ring rolling companies. It will also provide adequate background to researchers initiating research in the mechanics of the ring rolling process.     

An SDP Primal-Dual Algorithm for Approximating the Lovász-Theta Function

The Lovász ?-function (Lovász in IEEE Trans. Inf. Theory, 25:1–7, 1979) of a graph G=(V,E) can be defined as the maximum of the sum of the entries of a positive semidefinite matrix X, whose trace Tr(X) equals 1, and X _ij =0 whenever {i,j}∈E. This function appears as a subroutine for many algorithms for graph problems such as maximum independent set and maximum clique. We apply Arora and Kale’s primal-dual method for SDP to design an algorithm to approximate the ?-function within an additive error of δ>0, which runs in time $O(\frac{\vartheta ^{2} n^{2}}{\delta^{2}} \log n \cdot M_{e})$ , where ?=?(G) and M _e =O(n ³) is the time for a matrix exponentiation operation. It follows that for perfect graphs G, our primal-dual method computes ?(G) exactly in time O(? ² n ⁵logn). Moreover, our techniques generalize to the weighted Lovász ?-function, and both the maximum independent set weight and the maximum clique weight for vertex weighted perfect graphs can be approximated within a factor of (1+?) in time O(? ^?2 n ⁵logn).     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005     

Socially Assistive Robots in Elderly Care: A Mixed-Method Systematic Literature Review

The world’s population is aging, and developed countries are engaged in developing a new aged-care paradigm to reduce spiraling healthcare costs. Assistive technologies like Socially Assistive Robots (SAR) are being considered as enablers to support the process of care giving or keep elderly at home longer. This article reports a mixed-method systematic review of SAR in elderly care and recognizes its impact on elderly well-being, integrating evidence from qualitative and quantitative studies. It follows the principles explained in Cochrane Handbook for Systematic Reviews of Interventions and classifies interventions, measures, and outcomes of field trials of SAR in elderly care. Eighty-six studies in 37 study groups have been included. The findings imply positive effects of SAR on elderly well-being. Ten significant recommendations are made to help avoid the current limitations of existing research and to improve future research and its applicability. This review revealed that SAR can potentially enhance elderly well-being and decrease the workload on caregivers. There is a need for rigorous research methodology, person-centered care, caregiver expectation model, multimodal interaction, multimodal data collection, and modeling of culturally diverse groups to facilitate acceptability of SAR.     

Short beam three point bend tests in syntactic foams. Part I: Microscopic characterization of the failure zones

Scanning Electron Microscopic (SEM) studies were carried out on the failure surface of syntactic foam material tested in a short beam three point bend test (SBT) by employing 21 × 15 × 3 mm³ dimension bearing specimens. The syntactic foams were fabricated using glass microballoons in epoxy binder. The failure of the tensile, compression, and shear dominated regions were studied by SEM at different magnifications. The tensile region had characteristic features, such as partial debonding of the microballoons from the matrix and cracking of glass microballoons, apart from matrix cracking and some river pattern features. The compression side was characterized by crushing and collapsing of microballoons, resulting in accumulation of debris with no apparent river pattern for matrix‐rich regions. The midway positions of the SBT failed surface comprised of deformation bands in the matrix and occasional debonding of microballoons. The morphology recorded in the tensile and compression regions corroborated well with the results obtained on these foam samples in those specimens that were subjected to pure uniaxial tension and compression, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 673–679, 2005     

Past developments and future trends in the rotary or orbital forging process

Rotary forging is a relatively new manufacturing process with potential for cost-effective applications, especially in cold forging of intricate parts to net shape. In this paper orbital forging and axial die rolling processes are included as subsets of rotary forging while radial forging, also known as rotary forging, has been excluded; these decisions are primarily based on die kinematics. Because of its recent origins, the rotary forging process is first described. Then, a historical perspective is provided to trace its recent origins. The machines are classified based on die kinematics. Die kinematics influence the stick-slip or position discrepancy behavior of the different machine types and have deep implications on the die filling and accuracy capabilities of these machines. Rotary forging machines currently in operation in the U.S. and their applications are presented in greater detail. The discussion on future applications and potential research issues is primary based on the author’s own perception of future trends in this emerging field. The author is with.     

Characteristics of forming presses and recent developments for precision and net shape forming

The trend in metal forming is to produce parts with increased precision and geometric complexity. Thus, research and development is being conducted worldwide to develop presses and tooling for near-net and net shape forming of difficult-to-form components. As a result, presses with increased precision and multi-action tooling are being used routinely by advanced companies around the world. This paper will discuss the interactions between press characteristics and part production in precision forming and review some of the new press and tooling designs recently developed by various domestic and foreign manufacturers.     

不同无线技术能否共存?

新建工厂的无线技术应用已逐步获得认可,然而,还有一些过程工业对采用这项新技术或其它新的解决方案存有疑虑,主要担心多种无线技术互相之间可能存在射频干扰而影响主要通讯的可靠性,例如使用IEEE 802.11b/g和IEEE 802.15.4协议的无线电。因为两种无线电通讯采用的也是用于工业、科技和医疗的2.4GHz波段,业内人士曾     

Event-triggered control for discrete-time multi-agent average consensus

We consider the average consensus problem for the multi-agent system in the discrete-time domain. Three triggering based control protocols are developed, which dictate the broadcast and control update instants of individual agents to alleviate communication and computational burden. Lyapunov-based design methods prescribe when agents should communicate and update their control so that the network converges to the average of agents' initial states. We start with a static version of the distributed event-triggering law and then generalize it so that it involves an internal auxiliary variable to regulate the threshold dynamically for each agent. The third protocol uses a self-triggering algorithm to avoid continuous listening wherein each agent estimates its next triggering time and broadcasts it to its neighbors at the current triggering time. Numerical simulations are shown to validate the efficacy of the proposed algorithms.