A simple and efficient ultrasonic-assisted extraction procedure combined with UV-Vis spectrophotometry for the pre-concentration and determination of folic acid (vitamin B9) in various sample matrices

A simple and efficient ultrasonic-assisted extraction (UAE) procedure has been proposed for the pre-concentration of (2S)-2-[(4-{[(2-amino-4-hydroxypteridin-yl)methyl]amino}phenyl)formamido]pentanedioic acid (folic acid) in vegetables, pharmaceuticals and foods prior to determination at 540 nm using UV-Vis spectrophotometry. The method is based on hydrophobic ternary complex formation of folic acid with silver ions in the presence of cetyltrimethylammonium bromide (CTAB) as a sensitivity enhancer counter ion at pH 7.0, and then extraction into a micellar phase of polyethylene glycol monoalkyl ether (Genapol X-080). The impacts on the extraction efficiency and complex formation of analytical parameters such as sample pH, concentration of silver, concentration of surfactants and extraction time, ultrasonic time and sample volume, were investigated and optimised in detail. The matrix effect on the pre-concentration and determination of folic acid was investigated, and it was observed that the proposed method was highly selective against possible matrix co-extractives. Under optimised conditions, a good linear relationship between the analytical signal and folic acid concentration was obtained in the range of 0.6–180 μg l^?1 with a detection limit of 0.19 μg l^?1 and quantification limit of 0.63 μg l^?1. The applicability was evaluated using samples fortified at different concentration levels, and recoveries higher than 94.1% were obtained. The precision as the percent relative standard deviation (RSD%) was in range of 2.5–3.8% (10 and 40 μg l^?1, n = 5). The proposed method was validated by analysis of two standard reference materials (SRMs) and various real samples, and satisfactory results were obtained.     

Comparison of the structural and magnetic properties of submicron barium hexaferrite powders prepared by molten salt and solid state calcination routes

The effect of crystallinity and particle morphology of the submicron barium hexaferrite (BaFe₁₂O₁₉) powders on the magnetic properties was investigated on powders synthesized by solid-state calcination (BHF-c) and molten salt synthesis (BHF-m) methods. Solid-state calcination route was found to yield agglomerated powders with poor crystallinity, whereas molten salt synthesis resulted in well crystallized powders with an anisometric morphology. The saturation magnetization of the BHF-m and BHF-c samples is 59 emu/g, and 56 emu/g at 300 K, and 90 emu/g, and 86 emu/g at 10 K. The temperature dependence of magnetization of the BHF-m is higher and the increase in magnetocrystal anisotropy with decreasing temperature is also steeper than that of the BHF-c due to the higher crystallinity. The magnetocrystalline anisotropy constant, K, calculated from the Stoner–Wohlfarth theory, of the BHF-m and BHF-c powders is 14.24 and 10.14 HA²/kg, respectively. The higher effective anisotropy, K_eff of the BHF-m is also confirmed through ferromagnetic resonance measurements. In conclusion, the higher crystallinity, slightly higher particle size and anisometric morphology of the BHF-m particles translated into higher magnetic properties and magnetocrystalline anisotropy.     

Micelle-Mediated Extraction and Flame Atomic Absorption Spectrometric Method for Determination of Trace Cobalt Ions in Beverage Samples

A new method has been developed for preconcentration of cobalt at trace levels in beverage samples using calcon carboxylic acid as chelating agent and cetyl pyridinium chloride as an auxiliary ligand and entrapped into Triton X-114 prior to its determination by flame atomic absorption spectrometry (FAAS). The main parameters affecting cloud point extraction (CPE) efficiency such as pH, concentration of the complexing agent, cationic and nonionic surfactant concentration, salt effect, the equilibrium time, and temperature were investigated and optimized. After optimization of the CPE conditions, a preconcentration factor of 60, an enhancement factor of 106, and a detection limit of 0.20 μg L⁻¹ by (R ² = 0.9978) were obtained from a calibration curve constructed in the range of 0.7–100 μg L⁻¹. The proposed preconcentration procedure was successfully applied to the determination of cobalt ions in some real samples including natural drinking water, tap water, and beer and wine samples. The accuracy and validity of the proposed CPE/FAAS method was tested by means of five repeated analysis of reference standard materials (TM-253, a low level fortified water standard for trace elements). A good agreement between analytical results (28.8 and 28.5 μg L⁻¹ with calibration curve and standard addition curve method, respectively) and certified value (27.9 μg L⁻¹) for Co (p < 0.05) were obtained and verified by means of calibration curve and standard addition curve method using CPE procedure.     

A note on histamine levels in Turkish style fermented sausages

The histamine contents of Turkish style fermented sausages were determined on 46 samples of five different brands obtained from retail stores in Van in Turkey. Histamine was found in all samples in the range 19.64-87.47 mg/kg (mean 32.13 mg/kg). Histamine levels in the brands differed significantly (P<0.01). The results suggest that the histamine levels in the sausages were not hazardous in terms of public health although they may be a potential risk to sensitive individuals.     

An Inexpensive and Sensitive Method for Speciative Determination of Sn(IV), Sn(II), and Total Sn as Sn(IV) in Selected Beverages by Micellar Improved Spectrophotometry

Food Analytical Methods - In the present study, an inexpensive, selective, and micellar sensitive spectrophotometric method for Sn(IV) was developed at 537&nbsp;nm. The method is based on the...     

Electrochemical preparation and characterization of nickel and zinc-modified poly-2-aminothiazole films on mild steel surface and their corrosion inhibition performance

Poly-2-aminothiazole (pAT) was electrochemically synthesized on a mild steel (MS) specimen from 0.3 M aqueous ammonium oxalate solution containing 0.01 M 2-aminothiazole (2-AT) using cyclic voltammetry technique. The synthesized polymer film was then modified by electrodeposition of 100 μg cm⁻² Ni (MS/pAT–Ni) and Zn (MS/pAT–Zn) on top of the polymer surface. The surface morphologies of the polymer films were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The elemental analysis of the surface films was performed by energy dispersive X-ray spectroscopy (EDX). The effectiveness of the coatings in preventing corrosion of MS in 3.5% NaCl solution was assessed using electrochemical techniques. It was found that the obtained coatings were adherent to the steel surface. The pAT film provided a good corrosion protection against the attack of corrosive environment. Moreover, the modification of pAT film by deposition of Ni and Zn on top of the polymer surface significantly enhances the corrosion protection performance of the polymer film by exhibiting an improved barrier effect against the attack of corrosive environment. The surface morphologies and protection ability of the layers were found to be dependent on the type of deposited metal.     

Selective CO oxidation over promoted Au/γ-Al2O3 catalysts in the presence of CO2 and H2O in the feed

In this work, the effect of promoter type (Mg, Mn, Ce, Co, Fe and Ni) on selective CO oxidation performance of Au/γ-Al₂O₃ was studied with the realistic feed stream containing CO₂ and H₂O. The effects of Au loading, promoter loading, reaction temperature and the feed composition were also investigated. It was found that MgO was the best promoter in the presence of CO₂ and H₂O, and 1.25 wt.% Mg was sufficient for promotion. The CO conversion decreased with the addition of CO₂ while the presence of H₂O had some positive effects.     

A novel indicator system for catalytic spectrophotometric determination and speciation of inorganic selenium species (Se(Ⅳ), Se(Ⅵ)) at trace levels in natural lake and river water samples

A novel catalytic kinetic method is proposed for the determination of Se(Ⅳ), Se(Ⅵ), and total inorganic selenium in water based on the catalytic effect of Se(Ⅳ) on the reduction of Celestine blue by sodium sulfide at pH 7.0 phosphate buffer. The fixed-time method was adopted for the determination and speciation of inorganic selenium. Under the optimum conditions, the two calibration graphs are linear with a good correlation coefficient in the range 2-20 and 20-200 μg·L-1 of Se(Ⅳ) for the fixed-time method a...     

A novel material for lightweight concrete production

This paper presents the results of an experimental study on the effects of using recycled waste expanded polystyrene foam (EPS), as a potential aggregate in lightweight concrete. In this study, thermally modified waste EPS foams have been used as aggregate. Modified waste expanded polystyrene aggregates (MEPS) were obtained by heat treatment method by keeping waste EPS foams in a hot air oven at 130 °C for 15 min. Effects of MEPS aggregate on several properties of concrete were investigated. For this purpose, six series of concrete samples were prepared. MEPS aggregate was used as a replacement of natural aggregate, at the levels of 0%, 25%, 50%, 75%, and 100% by volume. The density of MEPS is much less than that of natural aggregate; MEPS concrete becomes a lightweight concrete with a density of about 900–1700 kg/m³. The 28-d compressive strengths of MEPS concrete range from 12.58 MPa to 23.34 MPa, which satisfies the strength requirement of semi-structural lightweight concrete.     

A fast hybrid field-circuit simulator for transient analysis of microwave circuits

A plane-wave-time-domain accelerated time-domain integral-equation solver is coupled to a SPICE-like transient circuit simulator to analyze electromagnetic platform-circuit interactions. The hybrid field-circuit simulator simultaneously solves surface-wire-volume time-domain integral equations that model electromagnetic interactions with the platform and modified nodal analysis equations that govern the behavior of the potentially nonlinear lumped circuits. A shielded nonlinear microwave amplifier is analyzed using the proposed scheme, and its immunity to electromagnetic interference is assessed.