Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

In this study, the effects of deep cryogenic treatment (DCT) on the wear resistance of AISI 52100 bearing steel were investigated. For this purpose, a number of bearing steel samples were held for different times (12, 24, 36, 48, 60 h) at deep cryogenic temperatures (?145 °C). The wear experiments were carried out in a ball–disk arrangement, by applying loads of 10 and 20 N and a sliding velocity of 0.15 m/s. After conducting the experimental studies, 36 h was found to be the optimal holding time. At this holding time, the wear rate and friction coefficient were decreased, while the hardness reached to maximum values. It was observed that DCT led to significant microstructural changes, which resulted in improved tribological properties.     

Monte Carlo Simulations of 17.9–22.3 MeV Energetic Proton Irradiation Effects on bcc-Zirconium Fusionic Materials

Advanced fusion structural materials (FSMs) have impact role in terms of efficiency of nuclear energy production. Besides engineering and design of fusion reactors, radiation durability of FSMs is another valuable issue that cannot be ignored. 17.9–22.3 MeV proton irradiation of bcc-Zirconium Fusion Structural Material was evaluated by using Monte Carlo based simulation tools. Total binary reaction cross sections were respectively calculated as 1167.6 and 1273.92 mb for 17.3- and 22.3 MeV proton energies via TALYS-1.6 version. Additionally, residual production cross sections and total particle production cross sections were obtained and analyzed by the TALYS code. Radiation damage parameters as Displacement Per Atom (DPA) and Stopping Power (SP) were studied by SRIM-2013 version. FLUKA 2011.1 used for only DPA calculations and making a complete comparison with the other calculation results. SP and Number of Secondaries were found by using GEANT4.10.p.04 version simulations. Natural Zr(p,x) reactions were studied in the given energy values in the plane of reaction probability and radiation damage calculations.     

Service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme

In this paper, we investigate service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme. M‐for‐N shared protection (backup) systems with priority control (i.e. prioritized protection switching and prioritized re‐housing of repaired units) can be applied to actual telecommunication devices that are subject to service‐level agreement (SLA) involving reliability measures. A priority level is assigned to each end user in such a system and the switching and unit re‐housing process is subject to the priority. The main contribution of this paper is to give a practical computation method of the user‐perceived availability under the priority control. Our case studies for real telecommunication systems reveal the effect of priority control on the user‐perceived availability. Copyright © 2011 John Wiley & Sons, Ltd.     

Photon transmission technique for monitoring drying processes in acrylamide gels formed with various crosslinker contents

In situ photon transmission experiments were performed using UV‐visible (UVV) spectrometer during the drying of polyacrylamide (PAAm) gels. These gels are formed from acrylamide (AAm) with various N,N′‐methylenebis(acrylamide) (Bis) contents by free radical crosslinking copolymerization (FCC) in water. The transmitted light intensity, I_tr increased continuously as PAAm gels are dried. Increase in I_tr was attributed to the decrease in the scattered light intensity, I_sc, which might be originated from the contrast between “frozen blob clusters” and holes in the drying gel. Decrease in I_sc was modeled using Rayleigh's equation, where drying times with various exponents were found to be proportional to the volume of frozen blob clusters. It was observed that the radius of frozen blob cluster (correlation length), ξ_c increased in various power of time, depending on Bis contents during drying of gels. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1898–1906, 2001     

Communication patterns during synchronous Web-based military training in problem solving

The nature of communication among geographically dispersed groups of learners using text messaging in a military training environment was assessed. A total of 6601 acts of chat were coded into one of three interaction content categories (social, task, or technology-related) and analyzed for frequency and relative change over time. Results indicated shifting patterns of interaction over the 6-month course; while technology concerns gradually diminished, on task discussion peaked in the middle months and social interactions were higher at the start and end of the training. Overall, student chats were categorized as on-task 55%, social 30%, or technology-related 15%. Examples of chats and focus group data indicated that there was an emphasis on fostering student problem solving within the online course.     

Relationship formation and relational control as correlates of psychotherapy quality and outcome.

This study examined the nature of therapist–client interactions within and across seven psychotherapy cases (a) to test whether therapeutic outcome is a function of a transition from relational incongruence to relational congruence (S. Strong, 1982), and (b) to investigate the relation of relational congruence and control to qualitative aspects of the therapy relationship and to therapy outcome. Measures of therapist and client response patterning served as indices of relational congruence and of relational control. Relationship quality was assessed in terms of therapist and client ratings of their working alliance and of therapy session depth and smoothness. Outcome was operationalized in terms of symptom reduction. Results showed limited support for a relationship between relational congruence and therapy outcome and suggested that relational control is not a significant factor in client or therapist evaluations of relationship quality or therapy outcome. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sludge accumulation, characteristics, and pathogen inactivation in four primary waste stabilization ponds in central Mexico

To support the development of safe and feasible sludge management strategies, the accumulation rates of sludge and its characteristics were studied in four primary wastewater stabilization ponds (WSPs) in central Mexico (three facultative and one anaerobic). The accumulation rates and distribution of sludge were determined by measuring the thickness of the sludge layer at 8-40 locations throughout each pond. The average, per capita sludge accumulation rates ranged from 0.021 to 0.036m(3)/person/yr. In the anaerobic pond the sludge distribution was uniform throughout the pond, whereas in the three facultative ponds most of the sludge accumulated directly in front of the inlet. To measure the horizontal and vertical variation in the sludge characteristics, sludge cores were collected from 3 to 7 locations in three of the ponds. Each core was divided into 4 sub-samples in which various physical, chemical, and microbiological parameters were measured. In addition, the inactivation of several pathogen indicator organisms was studied in a batch of sludge for 7 months. Based on the microbiological results, it is concluded that reasonable estimates of the inactivation of fecal coliform bacteria, fecal enterococci, F+ coliphage, somatic coliphage, and Ascaris eggs in WSP sludge in central Mexico can be made using first-order rate constants of 0.1, 0.1, 0.01, 0.001, and 0.001d(-1), respectively. From the observed changes in the concentrations of total solids and the volatile to fixed solids ratio, empirical equations were developed to describe anaerobic degradation and compression, which are the two most important processes affecting the volume of sludge after its deposition.