Fault detection for continuous‐time switched systems under asynchronous switching

In this paper, the problem of fault detection for continuous‐time switched systems under asynchronous switching is investigated. The designed fault detection filter is assumed to be asynchronous with the original systems. Attention is focused on designing a fault detection filter such that the estimation error between the residual and the fault is minimized in the sense of H _∞ norm. By employing piecewise Lyapunov function and average dwell time techniques, a sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities. Finally, an example of a switched electrical circuit is provided to illustrate the effectiveness of the proposed approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of novel polyimides containing side‐chain azo‐2‐naphthol moieties

An amine‐ester derivative of isoeugenol was prepared in three steps. This amine‐ester was converted to diazonium salt and subsequently was reacted with 2‐naphthol and a novel isoeugenol ester‐azo derivative as a new monomer was obtained in quantitative yield. This monomer was characterized by high‐field ¹H‐NMR, IR, and elemental analysis and then was used for the preparation of model compound and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione was allowed to react with this new monomer. The reaction was very fast and gave only one double adduct by Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer with bistriazolinediones [bis(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane and 1,6‐bis(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] were carried out in N,N‐dimethylacetamide at room temperature. The reactions were exothermic, fast, and gave novel heterocyclic polyimides by repetitive Diels–Alder‐ene polyaddition reactions. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1942–1951, 2003     

Process Mining Approach of a New Water Quality Index for Long-Term Assessment under Uncertainty Using Consensus-Based Fuzzy Decision Support System

One of the biggest challenges in water quality monitoring is how to optimize big Data gathered from a wide range of resources. This paper presented a new software-based pathway of process mining approach for extending a flexible WQI (Water Quality Index) that would deal with uncertainties derived from missing data occurrence in short- and long-term assessments. The methodology is based on integration of four multi-criteria group decision-making models coupled with fuzzy simulation including AHP (Analytical Hierarchy Process), fuzzy OWA (Ordered Weighting Average), TOPSIS (Technique for Order Preference by Similarity to Ideal Solution), and fuzzy TOPSIS that were used for data mining and group consensus evaluation.. Examining the methodology on groundwater resources being supplied for drinking in Shiraz, Iran showed high integrity, accuracy, and proximity-to-real interpretation of water quality. This was the first study where decision-making risks such as Decision Makers’ risk-prone or risk-aversion attitudes (optimistic degree), DMs’ power, and consensus degree of each water quality parameter have been considered in WQI research. The proposed index offered a flexible choice in defining the intended project duration, stakeholders’ judgments, types of water use and water resource, standards, as well as type and number of water quality parameters. Thus, beside sustaining the unity in structure, this methodology could be suggested as a potentially WQI for other regions. The presented methodology would help more efficient monitoring of water resources for drinking purpose with respect to water quality.

     

Selective harmonic elimination method for wide range of modulation indexes in multilevel inverters using ICA

Selective harmonic elimination（SHE） in multilevel inverters is an intricate optimization problem that involves a set of nonlinear transcendental equations which have multiple local minima. A new advanced objective function with proper weighting is proposed and also its efficiency is compared with the objective function which is more similar to the proposed one. To enhance the ability of the SHE in eliminating high number of selected harmonics, at each level of the output voltage, one slot is created. The SHE problem is solved by imperialist competitive algorithm（ICA）. The conventional SHE methods cannot eliminate the selected harmonics and satisfy the fundamental component in some ranges of modulation indexes. So, to surmount the SHE defect, a DC-DC converter is applied. Theoretical results are substantiated by simulations and experimental results for a 9-level multilevel inverter. The obtained results illustrate that the proposed method successfully minimizes a large number of identified harmonics which consequences very low total harmonic distortion of output voltage.     

Thermal antioxidative kinetics of sesamol in triacylglycerols and fatty acid methyl esters of sesame,olive, and canola oils

Oxidation kinetics of the triacylglycerols (TAGs) and fatty acid methyl esters (FAMEs) of sesame, olive, and canola oils were studied in the presence of the different concentrations of sesamol (0.1%–0.16%) at 60, 80, and 100°C. Sesamol increased the temperature coefficient, T_C, and Q₁₀ number of the TAGs more significantly compared to the FAMEs. All the sesamol-added TAG and FAME systems, respectively, of the olive, canola, and sesame oils, respectively, exerted increased values of the Arrhenius (activation energy, E_a, and frequency factor, A) and Eyring (enthalpy, ΔH⁺⁺, and entropy, ΔS⁺⁺) equation parameters. Sesamol improved the Gibbs free energy (ΔG⁺⁺) of the activated complex formation in the canola, sesame, and olive systems, respectively, and the effect was greater in the FAMEs.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Short‐Time Linear Quadratic Form Technique for Estimating Fast‐Varying Parameters in Feedback Loops

The precision of a closed‐loop controller system designed for an uncertain plant depends strongly upon the maximum extent to which it is possible to track the trend of time‐varying parameters of the plant. The aim of this study is to describe a new parameter estimation algorithm that is able to follow fast‐varying parameters in closed‐loop systems. The short‐time linear quadratic form (STLQF) estimation algorithm introduced in this paper is a technique for tracking time‐varying parameters based on short‐time analysis of the regressing variables in order to minimize locally a linear quadratic form cost function. The established cost function produces a linear combination of errors with several delays. To meet this objective, mathematical development of the STLQF estimation algorithm is described. To implement the STLQF algorithm, the algorithm is applied to a planar mobile robot with fast‐varying parameters of inertia and viscous and coulomb frictions. Next, performance of the proposed algorithm is assessed against noise effects and variation in the type of parameters.     

Comparative evaluation of performance measures for human driving skills

In this paper, we evaluate the adequacy of several performance measures for the evaluation of driving skills between different drivers. This work was motivated by the need for a training system that captures the driving skills of an expert driver and transfers the skills to novice drivers using a haptic-enabled driving simulator. The performance measures examined include traditional task performance measures, e.g., the mean position error, and a stochastic distance between a pair of hidden Markov models (HMMs), each of which is trained for an individual driver. The emphasis of the latter is on the differences between the stochastic somatosensory processes of human driving skills. For the evaluation, we developed a driving simulator and carried out an experiment that collected the driving data of an expert driver whose data were used as a reference for comparison and of many other subjects. The performance measures were computed from the experimental data, and they were compared to each other. We also collected the subjective judgement scores of the driver’s skills made by a highly-experienced external evaluator, and these subjective scores were compared with the objective performance measures. Analysis results showed that the HMM-based distance metric had a moderately high correlation between the subjective scores and it was also consistent with the other task performance measures, indicating the adequacy of the HMM-based metric as an objective performance measure for driving skill learning. The findings of this work can contribute to developing a driving simulator for training with an objective assessment function of driving skills.     

U-shaped energy loss curves utilization for distributed generation optimization in distribution networks

We propose novel techniques to find the optimal achieve the maximum loss reduction for distribution networks location, size, and power factor of distributed generation （DG） to Determining the optimal DG location and size is achieved simultaneously using the energy loss curves technique for a pre-selected power factor that gives the best DG operation. Based on the network＇s total load demand, four DG sizes are selected. They are used to form energy loss curves for each bus and then for determining the optimal DG options. The study shows that by defining the energy loss minimization as the objective function, the time-varying load demand significantly affects the sizing of DG resources in distribution networks, whereas consideration of power loss as the objective function leads to inconsistent interpretation of loss reduction and other calculations. The devised technique was tested on two test distribution systems of varying size and complexity and validated by comparison with the exhaustive iterative method （EIM） and recently published results. Results showed that the proposed technique can provide an optimal solution with less computation.