Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

Heavy metals contribution of non-aqueous fluids used in offshore oil drilling

A monitoring program was performed to investigate heavy metal content alteration due to exploratory drilling for oil using non-aqueous fluids (NAFs) in Brazilian offshore, 900 m deep. Fourteen elements were monitored in 54 sites and it was verified that after drilling activities the average Ba concentration was remarkably increased with respect to background level, even 1 year after the activity. A minor increase in Mn and a moderate increase in Al concentrations were verified. The Cd, Cr, Ni, As, Co, Cu, Pb, V, and Zn concentrations were at the background levels, ca. 1 year after the NAFs drilling materials deposition on the seafloor. The Al, Ba, Cd, Cr, Cu, Ni and Zn mean concentrations were significantly different (P<0.05) between the three sampling operations (cruises) performed, while As, Cd, Fe and Pb presented different mean values according to the distance of the oil well, independent of the sampling operation. Interaction between sampling operation and distance was observed for Mn. In all sediment samples the Hg concentration was below the detection limit (0.07 μg g⁻¹).     

SIMOP: Efficient reactive distillation optimization using stochastic optimizers

A methodology to improve the efficiency of stochastic methods applied to the optimization of chemical processes with a large number of equality constraints is presented. The methodology is based on two steps: (a) the optimization of the simulation step, which involves the optimum choice of design variables and subsystems to be simultaneously solved; (b) the optimization of the nonlinear programming (NLP) problem using stochastic methods. For the first step a flexible tool (SIMOP) is used, whereby different numerical procedures can be easily obtained, taking into account the problem formulation and specific characteristics, the need for specific initialization schemes and the efficient solution of systems of nonlinear equations. This methodology was applied to the optimization of a reactive distillation process for the production of ethylene glycol. Due to the complexity of the mathematical model, several different numerical procedures were generated, and their influence on the computational burden and on the reliability and accuracy of the optimization to reach the global optimum were studied. The results obtained suggest that in addition to the choice of design variables, the structure of subsystems associated to numerical procedures has a considerable impact on the performance of the optimizers.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Quantitation of vitamin K in human milk

A quantitative method was developed for the assay of vitamin K in human colostrum and milk. The procedure combines preparative and analytical chromatography on silica gel in a nitrogen atmosphere followed by reversed phase high performance liquid chromatography (HPLC). Two HPLC steps were used: gradient separation with ultraviolet (UV) detection followed by isocratic separation detected electrochemically. Due to co-migrating impurities, UV detection alone is insufficient for identification of vitamin K. Exogenous vitamin K was shown to equilibrate with endogenous vitamin K in the samples. A statistical method was incorporated to control for experimental variability. Vitamin K₁ was analyzed in 16 pooled milk samples from 7 donors and in individual samples from 15 donors at 1 month post-partrum. Vitamin K₁ was present at 2.94±1.94 and 3.15±2.87 ng/mL in pools and in individuals, respectively. Menaquinones, the bacterial form of the vitamin, were not detected. The significance of experimental variation to studies of vitamin K in individuals is discussed.     

Miscibility and morphology of poly(vinylidene fluoride)/poly[(vinylidene fluoride)‐ran‐trifluorethylene] blends

This study presents an investigation of the effect of the different crystalline phases of each blend component on miscibility when blending poly(vinylidene fluoride) (PVDF) and its copolymer poly[(vinylidene fluoride)‐ran‐trifluorethylene] [P(VDF–TrFE)] containing 72 mol % of VDF. It was found that, when both components crystallized in their ferroelectric phase, the PVDF showed a strong effect on the crystallinity and phase‐transition temperature of the copolymer, indicating partial miscibility in the crystalline state. On the other hand, immiscibility was observed when both components, after melting, were crystallized in their paraelectric phase. In this case, however, a decrease in crystallization temperatures suggested a strong interaction between monomers in the liquid state. Blend morphologies indicated that, in spite of the lack of miscibility in the crystalline state, there is at least miscibility between PVDF and P(VDF–TrFE) in the liquid state, and that a very intimate mixture of the two phases on the lamellar level can be maintained upon crystallization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1362–1369, 2002     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Electrochemical reduction of lead chloride on some solid electrodes in fused NaCl-KCl mixtures

The electrochemical reduction of PbCl₂ has been studied in a fused NaCl–KCl mixture with tungsten, molybdenum and nickel electrodes. Experiments were conducted in the 700–850°C temperature range using voltammetric and chronopotentiometric techniques. Poor lead adhesion to the electrode surface made the study with the nickel electrode impossible and the results obtained with the tungsten electrode somewhat doubtful. Lead adhesion to the molybdenum surface was good but the experimental curves had to be corrected for a cathodic residual current. The lead chloride reduction appears to occur reversibly according to the reaction.