Synthesis and kinetic studies of UV‐curable urethane‐acrylates

The UV‐curable urethane‐acrylates based on 2‐hydroxyethyl methacrylate (HEMA)‐terminated polyurethane (PU) for lithographic and coating applications are investigated in this study. Series of PU prepolymers were made from 4,4‐diphenyl methane diisocyanate (MDI), poly(propylene oxide) glycol (PPG 400), poly(butylene adipate)glycol (PBA 500), or poly(tetramethylene oxide) glycol (PTMO 1000) and are terminated with HEMA. The 2,2‐azobisisobutyronitrile (AIBN) was used as a UV‐initiator under air atmosphere. The curing kinetics of HEMA‐terminated PU film were studied. The curing analysis, using FTIR and reaction kinetics, indicate the reaction rate equation correlates well with the film thickness [T], initiator concentration [I], unreacted double bond concentration [C?C], and exposed energy [E] of the reaction system. The kinetic rate equation for the UV‐curable reaction can be written as © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3162–3166, 2004     

Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

多媒体教学服务系统的设计

本文从实际使用出发,提出了多媒体教学系统的设计思路,主要介绍了多媒体教学系统的系统结构、主要系统功能等。     

Electrocatalyst materials for fuel cells based on the polyoxometalates—K7 or H7[(P2W17O61)Fe(H2O)] and Na12 or H12[(P2W15O56)2Fe4(H2O)2]

Free acids of the iron substituted heteropoly acids (HPA), H₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (HFe1) and H₁₈[(P₂W₁₅O₅₆)₂Fe^III₂(H₂O)₂] (HFe2) were prepared from the salts K₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (KFe1) and Na₁₂[(P₂W₁₅O₅₆)₂Fe^III₄(H₂O)₂] (NaFe4), respectively. The iron-substituted HPA were adsorbed on to XC-72 carbon based GDLs to form HPA doped GDEs after water washing with HPA loadings of ca. 1 μmol. The HPA was detected throughout the GDL by EDX. Solution electrochemistry of the free acids are reported for the first time in sulfate buffer, pH 1-3. The hydrogen oxidation reaction was catalyzed by KFe1 at 0.33 V, with an exchange current density of 38 mA/cm². Moderate activity for the oxygen reduction reaction was observed for the iron substituted HPA, which was dramatically improved by selectively removing oxygen atoms from the HPA by cycling the fuel cell cathode under N₂ followed by reoxidation to give a restructured oxide catalyst. The nanostructured oxide achieved an OCV of 0.7 V with a Tafel slope of 115 mV/decade. Cycling the same catalysts in oxygen resulted in an improved catalyst/ionomer/carbon configuration with a slightly higher Tafel slope, 128 mV/decade but a respectable current density of 100 mA/cm² at 0.2 V.     

Nanosized silica‐supported metallocene/MAO catalyst for propylene polymerization

A nanosized silica particle was used as the support to prepare an Et[Ind]₂ZrCl₂/MAO catalyst for propylene polymerization of polypropylene. The catalyst and the polymer produced were characterized with nitrogen adsorption, ICP, DSC, SEM, TEM, XRD, solution viscometer, ¹³C NMR and optical microscopy. The effects of polymerization temperature and [Al]/[Zr] ratio on catalyst activity and polymer melting point were investigated. Under identical reaction conditions, nanosized catalyst exhibited better polymerization activity than the microsized catalyst (e.g., the former had 64% higher activity than the latter at the optimum polymerization temperature (50°C) and [Al]/[Zr] = 570). DSC results indicated that polymer melting point increased with the increase of [Al]/[Zr] ratio and with the decrease of polymerization temperature. XRD results showed that the percentage of γ crystals increased with decreasing [Al]/[Zr] ratio. Electron microscopic results showed that the polymer particle size increased with increasing polymerization temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2573–2580, 2006     

发动机润滑油理化指标与介电常数关系分析

通过实验检测电容传感器电容值的变化,验证了润滑油中水含量、铁含量和总酸值的变化量与润滑油介电常数增值之间的数量关系。结果表明:随着润滑油含水、总酸值、含铁的增加,润滑油介电常数变化趋势一致;对润滑油介电常数变化影响最大的是含水量;用介电常数作为评价润滑油衰变程度的综合指标在理论上是可行的。     

入侵防御系统可信通信协议的设计与实现

入侵防御系统主要基于入侵检测系统和防火墙之间的联动,而它们各自能识别和维护的数据格式往往是不同的。此外,这些敏感数据通常是在开放的网络环境中传输的,面临各种安全威胁。为此,引入可信通信的概念,设计并实现了基于XML（eXtensible Markup Language）的可信通信协议。与同类工作相比,该协议可实现异构操作环境下入侵检测系统与防火墙之间的安全数据传输,并可进一步扩展支持各种网络安全产品和网络管理设备,对于实现这些设备之间的数据融合,检测复杂的分布式网络攻击具有一定的参考价值。     

基于数据仓库的销售数据可视化分析系统

为了辅助销售管理者充分利用已有的历史销售数据,快速直观地捕获敏感数据,及时准确地把握市场行情,研究了以数据仓库为分析平台,根据销售数据具有的地理特征,结合Google提供的Google Maps API（Application Program Interface）,将OLAP（Online Analytical Processing）的分析操作映射到地图具有的交互操作上的可视化分析系统。并基于实际案例着重设计并优化了数据仓库架构,为系统应用开发奠定了良好的基础。实践证明,系统有效提高了销售管理部门的统筹决策的效率及能力,为企业创造了更大的经济效益。     

KINETICS AND MECHANISM OF THE REACTION BETWEEN OZONE AND O-CRESOL IN AQUEOUS SOLUTIONS

The stopped-flow spectrophotomctric method was applied to study the kinetics of the ozonation of o-cresol in aqueous solutions of pH values varying from 2 to 9 at 10 to 40°C. The fast reaction between o-cresol and ozone is second order overall with first order in each reactant. The ozonation rale increases with the temperature and pH value of the solution. In neutral solutions, the overall rate constant increases from 422,000 M^-1S^-1 at 10°C to 1,549,000 M^-1 S^-1 at 40°C. The activation energy is about 30 KJ/mol in the neutral solutions; it increases slightly with the acidity of the solution.

A mechanism based on the initial attack of ozone moleculesat the ortho and para positions of o-cresol is proposed for the ozonation reaction. According to this mechanism, three moles of ozone are required to react with each mole of o-cresol resulting in the rupture of the aromatic ring and production of various acids. The oxidation products were identified by these and other investigators. The proposed mechanism yields a second order kinetics for the overall reaction, as confirmed by the kinetic experiments.     

Solid polymer electrolytes. XI. Preparation,characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical‐covalent polyether–siloxane hybrids

A new hybrid polymer electrolyte system based on chemical‐covalent polyether and siloxane phases is designed and prepared via the sol–gel approach and epoxide crosslinking. FT‐IR, ¹³C solid‐state NMR, and thermal analysis (differential scanning calorimetry (DSC) and TGA) are used to characterize the structure of these hybrids. These hybrid films are immersed into the liquid electrolyte (1M LiClO₄/propylene carbonate) to form plasticized polymer electrolytes. The effects of hybrid composition, liquid electrolyte content, and temperature on the ionic conductivity of hybrid electrolytes are investigated and discussed. DSC traces demonstrate the presence of two second‐order transitions for all the samples and show a significant change in the thermal events with the amount of absorbed LiClO₄/PC content. TGA results indicate these hybrid networks with excellent thermal stability. The EDS‐0.5 sample with a 75 wt % liquid electrolyte exhibits the ionic conductivity of 5.3 × 10^?3 S cm^?1 at 95°C and 1.4 × 10^?3 S cm^?1 at 15°C, in which the film shows homogenous and good mechanical strength as well as good chemical stability. In the plot of ionic conductivity and composition for these hybrids containing 45 wt % liquid electrolyte, the conductivity shows a maximum value corresponding to the sample with the weight ratio of GPTMS/PEGDE of 0.1. These obtained results are correlated and used to interpret the ion conduction behavior within the hybrid networks. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1000–1007, 2006