FTIR Microscopic Studies on Normal, Polyp, and Malignant Human Colonic Tissues

Fourier-Transform Infrared Spectroscopy (FTIR) employs a unique approach tooptical diagnosis of tissue pathology based on the characteristic molecularvibrational spectra of the tissue. The biomolecular changes in the cellularand sub-cellular levels developing in abnormal tissue, including a majorityof cancer forms, manifest themselves in different optical signatures, whichcan be detected in infrared microspectroscopy. This report has two parts. Inthe first part, we report studies on normal, premalignant (polyp) andmalignant human colonic tissues from three patients with different stages ofmalignancy. Our method is based on microscopic infrared study (FTIR-microscopy)of thin tissue specimens and a direct comparison with traditional histopathologicalanalysis, which serves as a gold reference. The limited dataavailable showed normal colonic tissue has a stronger absorption thanpolypoid tumor and cancerous types over a wide region in a total of 100measurements. Detailed analysis showed that there is a significant decreasein total carbohydrate, phosphate and possibly creatine contents for polyp andcancerous tissue types in comparison to the controls. The same trend is maintainedin seven other patients studied. The second part consists of an analysis showingthe influence of various independent factors such as age, sex and grade of malignancy. Ourpreliminary results suggest that among the above three factors, age and gradeof malignancy have significant effect on the metabolites level, but sex has onlyminor effect on the measured spectra. Initial results on Linear DiscriminantAnalysis (LDA) showed good classification between normal and malignant cellsof human colonic tissues.     

Dehydrogenation of ethane to ethylene via radical pathways enhanced by alkali metal based catalyst in oxysteam condition

The dehydrogenation of ethane to ethylene in the presence of oxygen and water was conducted using Na₂WO₄/SiO₂ catalyst at high temperatures. At 923 K, the conversion rate without water was proportional to ethane pressure and a half order of oxygen pressure, consistent with a kinetically relevant step where an ethane molecule is activated with dissociated oxygen on the surface. When water was present, the ethane conversion rate was drastically enhanced. An additional term in the rate expression was proportional to a quarter of the oxygen pressure and a half order of the water pressure. This mechanism is consistent with the quasi‐equilibrated OH radical formation with subsequent ethane activation. The attainable yield can be accurately described by taking the water contribution into consideration. At high conversion levels at 1073 K, the C₂H₄ yield exceeded 60% in a single‐pass conversion. The C₂H₄ selectivity was almost insensitive to the C₂H₆ and O₂ pressures. © 2016 American Institute of Chemical Engineers AIChE J, 63: 105–110, 2017     

An overview of spectrum sensing techniques for cognitive LTE and LTE-A radio systems

Advanced communication systems, such as long term evolution (LTE) and LTE-advanced (LTE-A) systems, promise to increase the number of users with high-speed data exchange. However, it leads to spectrum scarcity because of the huge size of data exchange with limited spectrum resources. Cognitive radio (CR) technique is considered the best solution for this spectrum scarcity problem. Spectrum sensing (SS), one of the CR techniques is used to detect the spectrum hole of primary user (PU) without interference with PU. In this paper, several SS approaches for LTE and LTE-A systems are investigated in the CR system. These SS approaches are based on two techniques, namely energy detection and cyclostationary feature detection techniques. The first technique includes four approaches of auto-correlation based advanced energy, time domain detection, Welch periodogram and two-stage model algorithms, while the second technique contains two approaches, namely pilot induced cyclostationary and second order cyclostationary algorithms. According to the analysis, the two-stage model and the second order cyclostationary algorithms are better than the other algorithms because they produce accurate results at the expense of system complexity. Hence, in general a good SS algorithms would require some trade-off between complexity and accuracy.     

Deterioration and Recovery of Metakaolin Blended Concrete Subjected to High Temperature

The deterioration and spalling frequency of metakaolin (MK) blended concrete subjected to high temperature is analyzed and compared with the equivalent silica fume (SF), fly ash (FA) and pure OPC concretes. Normal and high strength concrete mixes incorporating 0–20% MK were prepared and exposed to a series of high temperatures till 800°C. The residual compressive strength, porosity and pore size distribution were determined. It was found that after an increase in compressive strength at 200°C, the MK concrete suffered a more severe loss of compressive strength and permeability-related durability than the corresponding SF, FA, and pure OPC concretes at higher temperatures. Explosive spalling was observed in both normal and high strength MK concretes, and the frequency increased with higher MK contents. It is concluded that the dense micro-structure and low porosity are the main reasons of the poor performance of MK concrete at high temperature. The effect of post-fire curing on the strength and durability recovery of fire-damaged concrete was also investigated. The test results indicated that the post-fire curing, results in substantial strength and durability recovery, and its extent depends upon the types of concrete, exposure temperature, method, and duration of re-curing.     

Statistical analysis of trace metals in the plasma of cancer patients versus controls

The plasma of cancer patients (n=112) and controls (n=118) were analysed for selected trace metals (Al, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Sr and Zn) by flame atomic absorption spectroscopy. In the plasma of cancer patients, mean concentrations of macronutrients/essential metals, Na, K, Ca, Mg, Fe and Zn were 3971, 178, 44.1, 7.59, 4.38 and 3.90 ppm, respectively, while the mean metal levels in the plasma of controls were 3844, 151, 74.2, 18.0, 6.60 and 2.50 ppm, respectively. Average concentrations of Cd, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Sr and Zn were noted to be significantly higher in the plasma of cancer patients compared with controls. Very strong mutual correlations (r>0.70) in the plasma of cancer patients were observed between Fe-Mn, Ca-Mn, Ca-Ni, Ca-Co, Cd-Pb, Co-Ni, Mn-Ni, Mn-Zn, Cr-Li, Ca-Zn and Fe-Ni, whereas, Ca-Mn, Ca-Mg, Fe-Zn, Ca-Zn, Mg-Mn, Mg-Zn, Cd-Sb, Cd-Co, Cd-Zn, Co-Sb and Sb-Zn exhibited strong relationships (r>0.50) in the plasma of controls, all were significant at p<0.01. Principal component analysis (PCA) of the data extracted five PCs, both for cancer patients and controls, but with considerably different loadings. The average metals levels in male and female donors of the two groups were also evaluated and in addition, the general role of trace metals in the carcinogenesis was discussed. The study indicated appreciably different pattern of metal distribution and mutual relationships in the plasma of cancer patients in comparison with controls.     

Metal Organic Framework Crystals in Mixed‐Matrix Membranes: Impact of the Filler Morphology on the Gas Separation Performance

Mixed‐matrix membranes comprising NH₂‐MIL‐53(Al) and Matrimid or 6FDA‐DAM have been investigated. The metal organic framework (MOF) loading has been varied between 5 and 20 wt%, while NH₂‐MIL‐53(Al) with three different morphologies, nanoparticles, nanorods, and microneedles has been dispersed in Matrimid. The synthesized membranes have been tested in the separation of CO₂ from CH₄ in an equimolar mixture. At 3 bar and 298 K for 8 wt% MOF loading, incorporation of NH₂‐MIL‐53(Al) nanoparticles leads to the largest improvement compared to nanorods and microneedles. The incorporation of the best performing filler, i.e., NH₂‐MIL‐53(Al) nanoparticles, into the highly permeable 6FDA‐DAM has a larger effect, and the CO₂ permeability increases up to 85% with slightly lower selectivities for 20 wt% MOF loading. Specifically, these membranes have a permeability of 660 Barrer with a CO₂/CH₄ separation factor of 28, leading to a performance very close to the Robeson limit of 2008. Furthermore, a new non‐destructive technique based on Raman spectroscopy mapping is introduced to assess the homogeneity of the filler dispersion in the polymer matrix. The MOF contribution can be calculated by modeling the spectra. The determined homogeneity of the MOF filler distribution in the polymer is confirmed by focused ion beam scanning electron microscopy analysis.     

QoS Guaranteed Resource Allocation Scheme for Cognitive Femtocells in LTE Heterogeneous Networks with Universal Frequency Reuse

In this paper, we propose a novel resource allocation scheme for co-channel interference avoidance in LTE heterogeneous networks with universal spectrum reuse where both macro users (MUs) and cognitive femto base stations (FBSs) within the same macrocell coverage can dynamically reuse whole spectrum. Specifically, resource blocks (RBs) are shared between cognitive FBSs in underlay mode while the resource sharing among FBSs and MUs is in overlay mode. The macrocell is divided into inner and outer regions with the inner region further divided into three sectors. The proposed scheme addresses co-channel interference (CCI) by employing fractional frequency reuse (FFR) for RB allocation in the outer region of the macrocell and increase the distance of users that reuse the same RB within the macrocell. Part of RBs are allocated to the outer region of the macrocell with a FFR factor of 1/3, while the remaining RBs are dynamically allocated to each sector in the inner region of macrocell based on MUs demand to efficiently utilize the available spectrum. A basic macro base station (MBS) assistance is required by the FBS in selection of suitable RB to avoid interference with MU in each sector. With the proposed solution, both macro and femto users can dynamically access the whole spectrum while having minimum bandwidth guarantee even under fully congested scenarios. Moreover, the proposed scheme practically eliminates the cross-tier interference and the CCI problem in heterogeneous network reduces to inter-femtocell interference. The throughput and outage performances of the proposed scheme are validated through extensive simulations under LTE network parameters. Simulation results show that the proposed scheme achieves a performance gain of more than 1.5 dB in terms of SINRs of both macro user and femto user compared to traditional cognitive and non-cognitive schemes without bandwidth guarantee for femtocells.     

Mechanical properties of bovine hydroxyapatite (BHA) composites doped with SiO<Subscript>2</Subscript>, MgO,Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript>

Biologically derived hydroxyapatite from calcinated (at 850 °C) bovine bones (BHA) was doped with 5 wt% and 10 wt% of SiO₂, MgO, Al₂O₃ and ZrO₂ (stabilized with 8% Y₂O₃). The aim was to improve the sintering ability and the mechanical properties (compression strength and hardness) of the resultant BHA-composites. Cylindrical samples were sintered at several temperatures between 1,000 and 1,300 °C for 4 h in air. The experimental results showed that sintering generally occurs at 1,200 °C. The BHA–MgO composites showed the best sintering performance. In the BHA–SiO₂ composites, extended formation of glassy phase occurred at 1,300 °C, resulting in structural degradation of the resultant samples. No sound reinforcement was achieved in the case of doping with Al₂O₃ and zirconia probably due to the big gap between the optimum sintering temperatures of BHA and these two oxides.     

Chapatti sensory and textural quality in relation to whole meal flour and dough characteristics

Food Science and Biotechnology - Current study was designed to evaluate sensory and textural quality characteristics of chapatti, a commonly consumed flat bread in South-Asia in relation to flour...     

Microwave Assisted Modulation of Vat Dyeing of Cellulosic Fiber: Improvement in Color Characteristics

The role of radiations in textile processing is gaining attention due to its low cost, energy effectiveness and eco-friendly process. This study is concerned with the improvement in modulation of microwave assisted vat dyeing of cellulosic fiber. It was found that radiation treatment of both cotton fabric and dye solution for 1 min gives good color strength, while for redox reaction, 2.5 g of NaHSO₃, 2 mL of CH₃COOH, and 1.5 mL of H₂O₂ are the optimized conditions which show it is a cost-effective tool. Good color strength was obtained at 65 °C for 1 h dyeing using 50 mL of optimal solution in dye bath at pH 9. Finally, ISO standards for color fastness to light, washing, rubbing and perspiration were applied at 0.5–2.5% of shade at optimal conditions which showed that microwave treatment has enhanced the color characteristics. Hence, the technique can successfully and easily be employed for surface modification of fabric for good quality dyeing with various classes of dyes.