A Novel Approach to Predict Field Strength in the Shadow of a 3-D Building Scenario

A novel approach to predict field strength in the shadow of a 3-D building scenario is presented. The field strength predicted by the proposed model is compared with available measurements and earlier predicted fields based on Fresnel-Kirchhoff theory. Two different scenarios have been considered to validate our model. The proposed model gives an improvement of 7.7 dB for Scenario 1; and 5.8 dB for Scenario 2. A good agreement between the prediction and the measurement is also observed.     

Effect of Powder Injection on the Interfacial Fracture Toughness of Plasma-Sprayed Zirconia

Adhesive strength of the plasma-sprayed thermal barrier coating is one of the most important parameters which influence their durability and reliability during service. While many methods exist to measure the adhesive strength, in general, they require cumbersome and time-consuming specimen preparation. Furthermore, considerations of the adhesion strength from the point-of-view of fracture toughness or for that matter, their systematic correlation to both processing variances are limited. Consequently, there is an opportunity to both simplify the measurement procedure and establish correlations among methods and linkages between processing parameters and interfacial fracture toughness. In this paper, we report results on adhesion strength of plasma-sprayed yttria-stabilized zirconia (YSZ) coating on aluminum substrates based on both interfacial indentation test (to measure interfacial fracture toughness) and the modified tensile adhesive test. Carrier gas flow for powder injection into the plasma torch was systematically varied to introduce variances in particle melting with concomitant impact on the measured adhesive strength. The results indicate the correlation between the particle melting index and the measured interfacial fracture toughness.     

Study of uranium sorption using D2EHPA‐impregnated polymeric beads

The extractant‐impregnated polymeric beads (EIPBs), containing Di(2‐ethylhexyl) phosphonic acid (D2EHPA) as an extractant and polyethersulfone as base polymer, were prepared by phase‐inversion method. These beads were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM) analysis to gain insight into the composition and morphology of beads. The beads exhibited good acid stability as no significant structural deformation or leaching out of the extractant was observed in 6M HNO₃ solution, up to the studied equilibration time of 15 days. The synthesized EIPBs were evaluated, for their ability to absorb uranium from aqueous solution, at different concentration and pH values. The kinetics measurement showed that about 90 min of equilibration time was enough to remove saturation amount of uranium from the solution. Kinetic modeling analysis of the extraction results was carried out using pseudo‐first‐order, pseudo‐second‐order, and intraparticle diffusion equations and the corresponding rate constants were determined. The equilibrium data were fitted into different isotherm models and were found to be represented well by the Freundlich isotherm equation. Reusability of the beads was also established by multiple sorption–desorption experiments. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3355–3364, 2013     

Tool selection in three-axis rough machining

An approach to tool selection and sequencing is presented for three-axis rough machining. The trade-off in the selection of tools is as follows: larger tools have reduced access while smaller tools are capable of reduced cutting speed. Furthermore, every tool change incurs a time penalty. The objective of this paper is to select a tool sequence that minimizes the total rough-machining time. In our approach, the removal volume is stratified into 2.5D machining slabs and, for each tool, the area accessible in each slab is computed incrementally, keeping in mind the cutting portion of the tool and the shape of the tool holder and spindle assembly. This reduces the three-axis problem to a series of two-axis problems with complex precedence constraints. Two models are presented to understand this new form of the problem. First, an integer linear programming formulation is discussed to show the complexity of the task. Second, a network flow formulation is presented, by which we show that it is possible to obtain efficiently an approximate solution of the problem. Examples are discussed to illustrate the algorithms discussed.     

A Classifiers Based Optimization Technique for Designing Turbine Airfoils

The primary focus of this work is in the development of an evolutionary optimization technique which gets progressively 'smarter' during the optimization process by learning from computed domain knowledge. In the approach, the influence of the design variables on the problem solution is recognized, and the knowledge learned is then generalized to dynamically create or change design rules during optimization. This technique, when applied to a constrained optimization problem, shows progressive improvement in convergence of search, as successive generations of rules evolve by learning from the environment. This method is applied to a complex aerodynamic optimization problem involving turbine airfoil design. In this investigation, the 3D geometry of an airfoil is optimized by simultaneously optimizing multiple 2D slices of the airfoil. Results from the optimization of a low pressure turbine nozzle are presented in the paper. Results obtained using standard numerical optimization techniques are also presented for comparison purposes.     

Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation

Polymeric mucoadhesive pellets of nifedipine were designed using computer software and they were prepared by extrusion-spheronization using HPMC K15M and κ-carrageenan with microcrystalline cellulose. A randomized rotatable two factor central composite design was applied for assessment of influence of two independent variables such as concentration of κ-carrageenan and HPMC K15M on dependent variables. Pellets were characterized by FTIR, DSC, SEM, flow properties, particle size, abrasion resistance, sphericity, drug content, percent production yield, in vitro drug release, ex vivo mucoadhesion, stability studies and similarity factor. The optimized formulation was selected based on criteria of sphericity nearest to 1.0 with maximum cumulative drug release percentage. Formulation NF6 exhibited sufficient porous spheres, free flowing and smooth surface mucoadhesion of 91.34 % and drug content 98.22 ± 0.37 %. Kinetic modeling revealed that the formulation followed the Higuchi model and showed the Quassi-Fickian drug release mechanism. The similarity factor, F2 value, was found to be 74 ± 6 and there was no significant change in drug content and ex vivo mucoadhesion after 90 days at 40 ± 2 °C, and 75 ± 5 % RH clearly indicated the optimized batch NF6 was stable. Thus, it can be concluded that use of κ-carrageenan, microcrystalline cellulose and HPMC K15M at the 20:35:10 w/w ratio could provide an effective carrier for enhancement of sphericity and sustained release of matrix pellets.     

Cost-benefit analysis of web bag in a web warehouse: An analytical approach

Sets and bags are closely related structures and have been studied in relational databases. A bag is different from a set in that it is sensitive to the number of times an element occurs while a set is not. In this paper, we introduce the concept of web bag in the context of a web warehouse called Whoweda (Warehouse Of Weda Data) which we are currently building. Informally, a web bag is a web table which allows multiple occurrences of identical web tuples. Web bag helps to discover useful knowledge from a web table such as visible documents (or web sites), luminous documents and luminous paths. In this paper, we perform a cost-benefit analysis with respect to storage, transmission and operational cost of web bags and discussed issues and implication of materializing web bags as opposed to web tables containing distinct web tuples. We have computed analytically the upper and lower bounds for the parameters which affect the cost of materializing web bags. This revised version was published online in August 2006 with corrections to the Cover Date.     

Development of a Liposome Based Contraceptive System for Intravaginal Administration of Progesterone

Progesterone bearing liposomes were prepared by the cast film method and characterized for various physical attributes. The liposomes could encapsulate nearly 98% of the drug. The progesterone bearing liposomes were incorporated into polyacrylamide gel and the drug content was determined. The in vitro drug dqfusion across she-goat vaginal membrane from the liposomal formulation was found to follow near zero order kinetics. The progestational activity of liposomal and control gel was assessed by monitoring the effect on the formation of corpora lutea. It was observed that both the formulations inhibit the formation of corpora lutea and thus, exhibited progestationul activity but the efsect of liposomal preparation was found to be greater and prolonged as compare to control gel.