Optical spectroscopic and electrochemical characterization of oxide films on a ferritic stainless steel

Colored oxide films that form on ferritic stainless steel in a high-temperature, oxidizing environment and correspond to different chemical compositions can cause a deterioration of pitting resistance and corrosion performance. Herein, optical spectroscopic and electrochemical techniques have been used to reveal the relationship between color, chemical composition, and corrosion resistance of oxide films formed in the temperature range from 400°C to 800°C for 30 min and at 800°C for 10, 20, 30, and 60 min. The substrate with a thin and dense passivation film leads to a low pitting potential but high corrosion resistance. Oxide films of yellowish or brownish color formed below 600°C are mainly iron oxides, which correspond to low corrosion resistance. No passivation characteristics can be observed for polarization curves of oxide films formed at 500°C and 600°C. The color of oxide films varies from blue to dark gray with the increase of oxidation time at 800°C. Corrosion resistance changes with different proportions of Fe₃O₄, Cr₂O₃, and FeCr₂O₄. The gray oxide films formed at 800°C for 30 min exhibit the lowest pitting susceptibility and the highest corrosion resistance.     

Comparative studies on thermal and toughness properties of polybenzoxazine composites with two functionalized graphene oxides

Abstract

Graphene oxide (GO) was functionalized by polyether amine (PEA) via two methods which were one-pot modification in acetone (GON) and two steps with the intermediate product of GOCO-Cl generated (GONS). There were more PEA successfully grafted onto GO for GONS than GON. The onset polymerization temperatures of the benzoxazine (Bz) composites decreased by the inclusion of 1?wt% of GO, GON or GONS. Thermal stability of the polybenzoxazine (PBz) composites was significantly improved indicated from the increase of weight loss temperature. T₁₀, T₂₀ and T₅₀ values of the composites with GONS were higher than that of the others. Toughness of PBzs may be enhanced by the incorporation of nanofillers, and GONS had stronger interfacial interaction with PBz matrix than GON.     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

由低浓度钛液制备偏钛酸的水解工艺研究

钛是一种重要的战略资源,在废弃脱硝催化剂中钛含量远远高于我们常用的钛精矿。近年来,各种从废弃催化剂中回收钛新技术的发展,使得人们对钛回收过程水解工艺的研究更加重视。本文以废弃催化剂经过高温钠化焙烧后硫酸酸解得到的低浓度钛液为原料,采用常压自生晶种热水稀释水解工艺制备偏钛酸,通过对自生晶种常压水解工艺中影响钛液水解产品平均粒径的五个关键因素:钛液F值、水解温度、钛液初始浓度、熟化时间、搅拌速度进行正交设计,然后比较各因素的极差,最终得到影响水解产品偏钛酸粒径各因素主次关系如下:水解温度>钛液初始浓度>钛液F值>熟化时间>搅拌速度。然后采用单因素控制变量法,研究了水解温度、钛液初始浓度、钛液F值、熟化时间、搅拌速度对影响钛水解产品偏钛酸粒径的较佳条件。结果表明:在水解温度95℃,钛液初始浓度200 g/L,钛液F值为1.8,熟化时间在50 min,搅拌速度300 r/min时,得到的偏钛酸平均粒径更接近2 μm。     

惠州东江水利枢纽变电站优化设计

文章结合广东省惠州东江水利枢纽工程的具体情况,对110 kV变电站进行了优化设计,通过对110 kV变电站采用敞开式布置、主变与GIS同平面布置、主变与GIS采用两层布置的三种不同设备选型及布置方式的技术和经济比较,推荐采用主变与GIS同平面的布置方案.GIS的使用,不仅满足电站运行可靠、灵活及运行维护方便等要求,而且也加快了施工进度,与周围的环境融合在一起,增添了工程的亮点.     

伸缩桥板的开发与实践

本文就伸缩桥板产品的开发及生产实践中存在的问题进行了分析，挖掘了产品开发与生产转化的关系。     

溶聚丁苯橡胶连续聚合工艺

概述了溶聚丁苯橡胶连续聚合工艺的凝胶抑制技术．指出连续聚合丁艺的重点是确定合适的抑凝体系；N，N，N＇，N’-四甲基乙烯基二胺／1，2-丁二烯以及四氢呋喃／1，2-丁二烯是最常用的抑凝体系。综述了单釜连续聚合和多釜串联连续聚合工艺．对世界各大橡胶公司的连续聚合反应釜的结构进行了介绍。     

先进控制技术在重油催化裂化装置的应用

介绍了由浙江中控软件技术有限公司和镇海炼油化工股份公司(镇海炼化)共同开发的重油催化裂化装置先进控制系统,以及该系统在镇海炼化的工业应用情况.详细阐述了该控制系统的控制策略.工业实践表明,模型和控制策略的综合应用明显地改善了先进控制系统的适应性.先进控制系统的应用明显提高了装置的操作平稳率和产品质量的稳定性,提高了装置的掺渣率,经济效益显著.