Preparation and characterization of r.f.-sputtered multilayered TiN---Au films

TiN---Au films with multiple intermediate layers deposited by r.f. sputtering are suggested as a solution to the problem of adhesion of gold films to TiN coatings. Their optical and mechanical properties are investigated and compared with those of conventional electroplated gold films. Various analysis techniques have been used: Auger electron spectroscopy to determine the composition profiles, the direct tensile test for adhesion characteristics, optical rub test for scratch characteristics, salt spray test for corrosion characteristics and the selected ordinate method to identify the color of resultant films. It is shown that poor adhesion of gold films of TiN coatings can be overcome. Resultant multilayered TiN---Au films show the same color as that of commercially available electroplated gold films and their reflectivity reaches 98% of that of gold films over the wavelength range studied. For further applications, electrical properties of multilayered TiN---Au have also been studied. The sheet resistance of these TiN---Au films on n-Si and p-Si is in the range 0.54ω/□–6.12ω/□. Thus these multilayered structures may be used as durable contacts for microelectronic applications.     

Coupled bending–torsional dynamic stiffness matrix for axially loaded beam elements

Analytical expressions for the coupled bending–torsional dynamic stiffness matrix elements of an axially loaded uniform beam element are derived in an exact sense by solving the governing differential equations of motion of the beam. The influence of axial force on the coupled bending–torsional frequencies of a cantilever and hinged–hinged beam of thin-walled section is demonstrated by numerical results. Application of the developed theory includes coupled bending–torsional frequency and mode calculations of helicopter, turbine and propeller blades, plane and space frames, and grillages consisting of axially loaded beam elements with non-coincident mass centre and shear centre.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.     

Elastic stress analysis of three-dimensional solids with small holes by BEM

An advanced level development of the boundary element method is presented for the elastic stress analysis of a three-dimensional solid containing a large number of small diameter, tubular shaped holes. The formulation has been developed such that these holes can be modelled by a system of curvilinear line elements, resulting in substantial savings in both data preparation and computing costs. This is accomplished by assuming a variation in the displacement field along the circumference defined in terms of trigonometric functions together with a linear or quadratic variation of displacements along the longitudinal direction.     

A comparison between isoparametric Lagrangian elements in 2D BEM

A comparison between a family of isoparametric C°-continucus elements in the context of two-dimensional elastostatics using the direct boundary element method is presented. The elements studied use Lagrangian shape functions of orders quadratic, cubic and quartic. The relative efficiencies of these elements from the viewpoint of accuracy of solution as well as cost effectiveness are examined through certain selected problems. It emerges from the present study that the quartic element is more reliable in accuracy than the lower members of the family without being necessarily more expensive.     

Effect of sillimanite beach sand composition on mullitization and properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

Mullite was developed by reaction sintering of sillimanite beach sand and calcined alumina. Two varieties of sillimanite beach sand viz. S and Z having different compositions were selected. Synthesis and properties of mullite were very much dependent on the sillimanite beach sand composition. Presence of higher amount of impurities in the Z-variety of sillimanite sand favours the densification by liquid phase formation. Presence of zircon in Z-variety increases the hardness and fracture toughness. Alumina addition improves the mechanical/thermomechanical properties of the samples. Mullite retains the usual orthorhombic habit of sillimanite. Rounded to sub rounded zirconia dispersed within the mullite matrix of the sample ZA is noticed.     

A Model for Flooding Prediction in Circular Tubes

Flooding phenomenon limits the stability and the flow of a liquid film falling along the walls of a channel in which a gas is flowing upwards.As known, the entrainment effect can completely prevent the liquid to fall from its natural flow. The present work proposes a new mechanistic model for the prediction of the onset of flooding in vertical and inclined pipes in the presence of obstructions, as well as taking into account the viscosity effect. The good performance of the model in the different geometrical conditions and for variable viscosities of the liquid component assesses the validity of the hypothesis that the instability of a wavelike disturbance limits the countercurrent flow in a channel.     

Improved genetic algorithm for channel allocation with channel borrowing in mobile computing

This paper exploits the potential of the Genetic Algorithm to solve the cellular resource allocation problem. When a blocked host is to be allocated to a borrowable channel, a crucial decision is which neighboring cell to choose to borrow a channel. It is an optimization problem and the genetic algorithm is efficiently applied to handle this. The Genetic Algorithm, for this particular problem, is improved by introducing a new genetic operator, named pluck, that incorporates a problem-specific knowledge in population generation and leads to a better channel utilization by reducing the average blocked hosts. The pluck operator makes the crucial decision of when and which cell to borrow with the future consideration that the borrowing should not lead the network to chaos. It makes a channel borrowing decision that minimizes the number of blocked hosts and improves the long-term performance of the network. Efficacy of the proposed method has been evaluated by experimentation.     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008